☆ 4.5 Article

Generation of compressive residual stress at the root of tube-to-tubesheet welded joints in a heat exchanger

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Effect of Laser Shock Peening on micro-structure and mechanical properties of Friction Stir Welded CuCrZr sheets

Abhijit Sadhu et al.

Summary: The study showed that LSP treatment can enhance yield strength and fatigue life of base and FSW specimens, but has less obvious effect on surface residual stress. Additionally, the increase in low angle grain boundaries after LSP indicates an increase in substructure induced by plastic deformation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of distribution of residual stress in shot-peened layer of nickel-based single crystal superalloy DD6 by nanoindentation technique

Ming Liu et al.

Summary: The hardness, elastic modulus, yield strength, work hardening exponent, and residual stress within the shot-peened layer of nickel-based single crystal superalloy DD6 were experimentally obtained by nanoindentation. Different models for calculating residual stresses showed similar trends with depth, but significant differences in values were found, with Wang's model being most suitable for DD6. The study also revealed that residual stress has an impact on mechanical properties such as hardness and yield strength, but has a minimal effect on elastic modulus.

MECHANICS OF MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

A new calculation formula to describe the dynamic pressure of water jet peening with elliptical nozzle for high-efficiency treatment

Hong-Xiang Zheng et al.

Summary: Numerical simulations were used to discuss the water jet velocity and dynamic pressure of elliptical nozzles, finding that an elliptical nozzle with an axis ratio of 8 can effectively control welding residual stresses.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Effects of the secondary shot in the double shot peening process on the residual compressive stress distribution of Ti-6Al-4V

Goratouch Ongtrakulkij et al.

Summary: This research examines the effect of media type and media size in the second shot of double shot peening on hardness, roughness, and residual stress. It finds that using 80μm silica media in the second shot can generate the highest hardness and residual compressive stress while reducing roughness.

HELIYON (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement mechanism in stress corrosion resistance of the X70 pipeline steel in hydrogen sulfide solution by massive laser shock peening treatment

Zhao Wang et al.

Summary: The effects of MLSPT on the microstructural evolution and stress corrosion behavior of X70 pipeline steel in hydrogen sulfide solutions were investigated, and it was found that MLSPT can generate nanocrystallines and refined microstructures in the near-surface layer, significantly improving stress corrosion crack resistance.

CORROSION SCIENCE (2022)

Add to Collection

Article Engineering, Industrial

Deep learning-based monitoring of surface residual stress and efficient sensing of AE for laser shock peening

Zhifen Zhang et al.

Summary: This paper studied the in-situ evaluation of surface residual compressive stress (SRCS) for 7075 aluminum alloy in laser shock peening (LSP) and the efficient sensing of acoustic emission (AE) based on deep learning methods. The research provides guidance for real-time non-destructive evaluation of residual stress via AE in laser manufacturing.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Optics

Effect of laser shock peening on fatigue properties of U75VG rail flash-butt welding joints

Xiaoya Li et al.

Summary: This study examines the effect of laser shock peening (LSP) treatment on the bending fatigue performance of rail-welded joints. It was found that LSP treatment increases the fatigue life of the joints and enhances resistance to fatigue crack growth.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Improving the corrosion and stress corrosion cracking resistance of 316 L stainless steel in high temperature water by water jet cavitation peening

Tingyun Ming et al.

Summary: Water jet cavitation peening (WJP) was used to improve the corrosion and stress corrosion cracking (SCC) resistance of 316L stainless steel in high temperature water. The results showed that WJP significantly enhanced the corrosion and SCC resistance of the material, which can be attributed to the increase in residual compressive stress and changes in the surface layer microstructure.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of shot peening on static and fatigue properties of self-piercing riveting joints

Zhi-Chao Huang et al.

Summary: This study combines shot peening process with self-piercing riveting process to improve the performance of self-piercing riveting joints. Shot peening can induce residual compressive stress in aluminum sheets, resulting in improved static and fatigue strength of the joints. The main fatigue failure type is the damage of the lower sheets at the contact zones with the rivet leg. The shot peening process effectively enhances the self-piercing riveting joint performance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Manufacturing

Numerical simulation of residual stress of butt-welded joint involved in complex column-beam welded structure

Chaohua Zhang et al.

Summary: The objective of this study is to clarify the effects of structural restraint and adjacent welded joints on the residual stress distribution of column-beam welded structures. Through numerical simulation and validation, it was found that structural restraint and adjacent welded joints have significant influence on the residual stress distribution.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Residual stresses evolution during strip clad welding, post welding heat treatment and repair welding for a large pressure vessel

Wenchun Jiang et al.

Summary: This paper investigates the residual stress distribution and evolution during strip clad welding, proposing a new heat source model with good agreement to experimental results. It also addresses the limited effect of PWHT on residual stress and proposes a novel heat treatment method based on temperature regulation.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)

Add to Collection

Article Engineering, Industrial

Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel

Hitoshi Soyama et al.

Summary: Shot peening and cavitation peening are traditional methods used to improve the fatigue properties of metallic materials. Research has shown that shot peened specimens have longer fatigue life under certain conditions, while cavitation peened specimens have slightly higher fatigue strength. Both methods introduce compressive residual stress which decreases during fatigue testing.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Finite element analysis of in- process thermal mitigation of welding induced residual stresses in 9Cr-1Mo-V steel butt joint considering phase transformation

Saurav Suman et al.

Summary: The study found that transient side heating is effective in reducing residual stresses transversely the weld region, but not suitable for P91 steel welds. Heat sinking causes a sudden drop in residual stress values in the heat-affected zone, while the combination of side heating and heat sinking enhances the mitigation results.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Mechanical

Improving high cycle fatigue performance of gas tungsten arc welded Ti6Al4V titanium alloy by warm laser shock peening

Xiaotai Feng et al.

Summary: The study successfully applied warm laser shock peening (WLSP) technology as a post weld treatment to significantly increase the resistance of welded components to vibration failure. The high cycle vibration fatigue limit was improved by 42.3% through the introduction of high amplitude compressive residual stress, high stability of compressive residual stress, and surface nanostructure induced by WLSP.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Multidisciplinary

A rigid-flexible coordinated method to control weld residual stress and deformation during local PWHT for ultra-large pressure vessels

Qiang Jin et al.

Summary: This paper discusses the weld residual stress and deformation of ultra-large pressure vessels during local post welding heat treatment (PWHT), highlighting the main reasons for cracking and proposing a rigid-flexible coordinated control method to prevent cracking. The method is shown to reduce axial stresses, convert them to compressive stress, decrease radial deformation by 58%, and improve inconsistent deformation in welded joints, ensuring the safe service of ultra-large pressure vessels.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Using reinforce plate to control the residual stresses and deformation during local post-welding heat treatment for ultra-large pressure vessels

Yun Luo et al.

Summary: A new control method with reinforced plate was proposed to prevent cracking during local PWHT for ultra-large pressure vessels. The stresses and deformation during local PWHT were discussed, showing that reinforced plate can reduce axial stresses in weld toe and decrease maximum radial deformation by over 50%.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)

Add to Collection

Article Engineering, Multidisciplinary

A primary plus secondary local PWHT method for mitigating weld residual stresses in pressure vessels

Qiang Jin et al.

Summary: With the increasing use of large and ultra-large pressure vessels in petrochemical and power generation industries, traditional local post-weld heat treatment (PWHT) procedures are no longer feasible, prompting the introduction of a new primary-secondary heating based local PWHT technique (PS-PWHT). Both finite element residual stress modeling and experimental residual stress measurements have shown that the PS-PWHT method can significantly reduce welding-induced residual stresses, even leading to some level of compressive residual stresses at the vessel weld region.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution and surface integrity of ultrasonic surface rolling in Ti6Al4V alloy

Xian Luo et al.

Summary: Ultrasonic surface rolling technology can significantly improve surface integrity, increase the depth and amplitude of the residual compressive stress layer, and enhance the microstructure and properties of Ti6Al4V alloys. Treated specimens showed the smallest surface roughness and the largest plastic deformation depth, indicating improved surface characteristics.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of welding sequence on residual stress distribution and deformation in Q345 steel H-section butt-welded joint

Yifeng Wang et al.

Summary: This paper developed a thermo-elastic-plastic finite element method to simulate welding residual stresses and deformation in low alloy high strength steel joints. The study found that welding sequence has an influence on residual stress distribution and deformation, recommending welding the web first in the fabrication of H-section butt-welded joints.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Manufacturing

Theoretical calculation and experiment of the surface residual stress in the plane ultrasonic rolling

Feng Jiao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Manufacturing

Comparative study on SAW welding induced distortion and residual stresses of CSEF steel considering solid state phase transformation and preheating

Saurav Suman et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of post-weld heat treatment on the residual stress and deformation of 20/0Cr18Ni9 dissimilar metal welded joint by experiments and simulations

Bensheng Huang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Construction & Building Technology

Stress relief investigation using creep model considering back stress in welded rotor

Mengjia Hu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Industrial

Effect of shot peening time on δ/γ residual stress profiles of AISI 304 weld

Hsuan-Han Lai et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanism for stress relaxation behavior of the residual stress improving treatments with water jet peening and buffing

Lina Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Residual stresses in narrow-groove girth welds and applications for fitness-for-service assessment

Shaopin Song et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)

Add to Collection

Article Engineering, Mechanical

Residual stresses in high-speed two-dimensional ultrasonic rolling 7050 aluminum alloy with thermal-mechanical coupling

Hongwei Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Thermo-mechanical study of single and multi-pass welding of CSEF steel for residual stresses and deformations considering solid state phase transformation

Saurav Suman et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Construction & Building Technology

Thermo-Mechanical Analysis of CO2 Laser Butt Welding on AISI 304 Steel Thin Plates

Rakesh Bhadra et al.

INTERNATIONAL JOURNAL OF STEEL STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical and experimental investigation on microstructure and residual stress of multi-pass hybrid laser-arc welded 316L steel

Lin Chen et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Engineering, Marine

Shot peening effects on residual stresses redistribution of offshore wind monopile multi-pass weldments

A. Khajeian et al.

MARINE STRUCTURES (2019)

Add to Collection

Article Engineering, Industrial

Effects of pass arrangement on angular distortion, residual stresses and lamellar tearing tendency in thick-plate T-joints of low alloy steel

Chaohua Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses: Numerical study and neutron diffraction measurement

Wenchun Jiang et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Automation & Control Systems

Numerical prediction and experimental analysis of the residual stress fields and generated distortion in hybrid laser/arc welded thick plates of high-strength steels

Nima Yazdian et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Effect of helix angle on residual stress in the spiral welded oil pipelines: Experimental and finite element modeling

Yun Luo et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2018)

Add to Collection

Article Engineering, Multidisciplinary

Thermo-structural fatigue analysis of shell and tube type heat exchanger

Rakesh Patil et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)

Add to Collection

Article Engineering, Mechanical

Using X-Ray Diffraction and Finite Element Method to Analyze Residual Stress of Tube-to-Tubesheet Welded Joints in a Shell and Tube Heat Exchanger

Yu Wan et al.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Weld residual stresses in a thick plate considering back chipping: Neutron diffraction, contour method and finite element simulation study

Yu Wan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation

J. Ahn et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Engineering, Multidisciplinary

A framework for estimating residual stress profile in seam welded pipe and vessel components Part II: Outside of weld region

Shaopin Song et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)

Add to Collection

Article Engineering, Multidisciplinary

A framework for estimating residual stress profile in seam-welded pipe and vessel components part I: Weld region

Shaopin Song et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2016)

Add to Collection

Article Engineering, Mechanical

Investigation of welded structures on mechanical properties of 304L welded tube-to-tubesheet joints

X. L. Wei et al.

ENGINEERING FAILURE ANALYSIS (2015)

Add to Collection

Article Engineering, Mechanical

Neutron Diffraction Measurement and Numerical Simulation to Study the Effect of Repair Depth on Residual Stress in 316L Stainless Steel Repair Weld

Wenchun Jiang et al.

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2015)

Add to Collection

Proceedings Paper Engineering, Mechanical

A Study on Welding Residual Stress in Elliptical Tube to Tube Sheet Joint of a Phthalic Anhydride Switch Condenser

X. -M. Han et al.

PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE (2015)

Add to Collection

Article Engineering, Multidisciplinary

On residual stress prescriptions for fitness for service assessment of pipe girth welds

Pingsha Dong et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)

Add to Collection

Article Engineering, Multidisciplinary

Analysis of residual stress relief mechanisms in post-weld heat treatment

Pingsha Dong et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Residual stress reduction in the penetration nozzle weld joint by overlay welding

Wenchun Jiang et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Engineering, Multidisciplinary

FEM analysis for residual stress prediction in hot rolled steel strip during the run-out table cooling

Xiaodong Wang et al.

APPLIED MATHEMATICAL MODELLING (2013)

Add to Collection

Article Engineering, Mechanical

Using FEM to determine the thermo-mechanical stress in tube to tube-sheet joint for the SCC failure analysis

Shugen Xu et al.

ENGINEERING FAILURE ANALYSIS (2013)

Add to Collection

Article Engineering, Multidisciplinary

Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger

Shugen Xu et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

A study of the residual stress and deformation in the welding between half-pipe jacket and shell

Wen-chun Jiang et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Nuclear Science & Technology

Influence of repair length on residual stress in the repair weld of a clad plate

Wenchun Jiang et al.

NUCLEAR ENGINEERING AND DESIGN (2012)

Add to Collection

Article Engineering, Industrial

Numerical and experimental study of thermally induced residual stress in the hybrid laser-GMA welding process

Fanrong Kong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Characterization & Testing

Residual stress measurement of new and in-service X70 pipelines by X-ray diffraction method

Ruibin Gou et al.

NDT & E INTERNATIONAL (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements

Dean Deng et al.

COMPUTATIONAL MATERIALS SCIENCE (2006)

Add to Collection

Article Engineering, Multidisciplinary

Optimising residual stresses at a repair in a steam header to tubeplate weld

TPT Soanes et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2005)

Add to Collection

Article Engineering, Mechanical

Failure analysis of tube-tubesheet welds in cracked gas heat exchangers

JL Otegui et al.

ENGINEERING FAILURE ANALYSIS (2004)

Add to Collection

Article Engineering, Mechanical

An experimental study of the residual stresses, and their alleviation, in tube to tube-sheet welds of industrial boilers

RB Tait et al.

ENGINEERING FAILURE ANALYSIS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.