4.7 Article

Strain rate dependence of strengthening mechanisms in ultrahigh strength lath martensite

Journal

INTERNATIONAL JOURNAL OF PLASTICITY
Volume 161, Issue -, Pages -

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijplas.2022.103495

Keywords

Lath martensite; Strain rate sensitivity; Strengthening mechanism; Dislocation; Lattice friction

Ask authors/readers for more resources

The strain rate sensitivity of lath martensite and its underlying physics were investigated, revealing that strain rate has minor effect on mechanical properties at low strain rates and that both yield strength and work-hardening rate significantly increase at high strain rates. Microstructural characterization showed that the enhanced yield strength during high-strain-rate deformation is due to larger lattice friction for dislocation slip, and the higher work-hardening rate is attributed to the increased strain gradient resulting in the generation of geometrically-necessary dislocations.
The strain rate dependent mechanical properties of lath martensite are important for developing ultrahigh strength steels for automobile applications. Here, taken 2 GPa grade press hardening steel as a model material, we explored the strain rate sensitivity of lath martensite and the underlying physics. Uniaxial tensile tests were carried out over a wide range of strain rates from 10 3 to 1450 s(-1) to determine the rate dependent mechanical properties. Strain rate exerts minor effect on mechanical properties at strain rates below 102 s(-1). In contrast, both yield strength and work-hardening rate substantially increase with strain rate during high-strain-rate deformation. Microstructural evolution was characterized using electron backscatter diffraction and transmission electron microscopy. Particularly, synchrotron X-ray diffraction was used to measure dislocation density. The respective strengthening contributions from the friction stress, dislocations and high-angle block boundaries in lath martensite were evaluated on the basis of the measured microstructural parameters as well as related phenomenological models for predicting their strengthening effects. It is found that the enhanced yield strength during high-strain-rate deformation is due to a larger lattice friction for dislocation slip. The higher work-hardening rate is attributed to the enhanced mechanical heterogeneity within the current lath martensite microstructure at higher strain rates, which leads to larger strain gradient and thus promoted generation of geometrically-necessary dislocations.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available