4.6 Article

Emerging low-density polyethylene/paraffin wax/aluminum composite as a form-stable phase change thermal interface material

Related references

Note: Only part of the references are listed.
Review Materials Science, Multidisciplinary

Research progress in interface modification and thermal conduction behavior of diamond/metal composites

Ping Zhu et al.

Summary: This paper reviews the experimental research and computational simulation application on interface modification in diamond/metal composites, highlighting the promising approach of combining computational simulation with experimental methods.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Article Materials Science, Multidisciplinary

Mica-stabilized polyethylene glycol composite phase change materials for thermal energy storage

Dongyao Zhang et al.

Summary: In this study, mica was used as a supporting matrix for composite phase change materials (PCMs), and its interaction with polyethylene glycol (PEG) was investigated. The results showed that mica could stabilize PEG, and the composite PCM exhibited improved thermal properties, indicating its potential application in building energy conservation.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Review Materials Science, Multidisciplinary

Carbon materials: The burgeoning promise in electronics

Yuting Zheng et al.

Summary: Carbon-based electronic technology, with its numerous advantages over traditional silicon-based technology, is becoming the main direction for the next generation of electronic products. Carbon nanotubes, graphene, and bulk diamond show excellent performance as carbon-based structures. The rapid development of carbon electronics is driven by innovative preparation methods and the design of composite hybrid carbon structures. Advances in commercial production have further improved the prospects of carbon materials in electronic applications.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Article Chemistry, Physical

Electrolyte additive engineering for aqueous Zn ion batteries

Yifei Geng et al.

Summary: Aqueous Zn ion batteries (AZIBs) are a promising electrochemical energy storage device. Additive engineering is an innovative and flexible technology that effectively solves the challenges faced by AZIBs cathode and anode. This review summarizes the effects of additive engineering on cathode and anode, as well as the influence on charge storage mechanism and kinetic characteristics of AZIBs.

ENERGY STORAGE MATERIALS (2022)

Article Thermodynamics

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Qiqiu Huang et al.

Summary: The study successfully prepared a novel flexible composite SBS@PA/EG for battery thermal management systems, effectively controlling the maximum temperature and temperature difference of the battery module.

APPLIED THERMAL ENGINEERING (2021)

Article Chemistry, Physical

Effect of alkyltriethoxysilane on the performance of sodium silicate-based silica shell phase change microcapsules

Xuening Fei et al.

Summary: This study improved the encapsulation ratio and toughness of silica/paraffin phase-change microcapsules by introducing silane coupling agents and Na2SiO3 co-condensation. The melting enthalpy and encapsulation ratio of the microcapsules were significantly increased, while the melt permeability was notably reduced through modification with different silane coupling agents.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Materials Science, Multidisciplinary

Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying

Essam B. Moustafa et al.

Summary: In this study, nano-sized silicon carbide reinforced copper matrix nanocomposites were manufactured and characterized for their microstructure and properties. The results showed that the mechanical properties of the nanocomposites can be significantly improved by increasing the SiC content and sintering temperature, including hardness and strengthening efficiency. Additionally, these nanocomposites exhibit good electrical conductivity and thermal stability.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Article Thermodynamics

Experimental study on the thermal management of batteries based on the coupling of composite phase change materials and liquid cooling

Ziqiang Liu et al.

Summary: By utilizing a heat dissipation module based on a composite phase change material (CPCM) and liquid cooling, the thermal management of battery packs can be improved, making it more suitable for cyclic charging and discharging. Rapid realization of different heat dissipation solutions for battery pack modules with the coupling of CPCM and liquid cooling can be achieved by simply adjusting the hose connection. Furthermore, increasing the flow rate and decreasing the temperature of input cold water can enhance the heat dissipation effect of the battery pack.

APPLIED THERMAL ENGINEERING (2021)

Article Polymer Science

Degradable Redox-Responsive Polyolefins

Christina M. Geiselhart et al.

Summary: The synthesis of long-chain aliphatic metathesis polymers containing redox-responsive TMBQ units is introduced in this study. The on-demand degradation of the polymer into small molecules upon the addition of a reductant such as Na2S2O4 is demonstrated, with the cleaved TMBQ unit recovered with high purity for recyclable redox polymers. Additionally, redox polymers with tailored functional properties are obtained through postpolymerization modification of the olefinic backbone with bromine and pentafluorophenyl motifs, expanding the scope of possible applications.

MACROMOLECULES (2021)

Article Polymer Science

Investigations on the influence of multiple extrusion on the degradation of polyolefins

Andrea Schweighuber et al.

Summary: The importance of mechanical recycling of polymers has increased in recent decades due to government regulations worldwide. The increased thermo-mechanical stress during the recycling process can significantly impact the quality of recyclates. Research has shown the occurrence of odd-numbered linear alkane chains in polyethylene samples and oxidized branched alkanes in polypropylene samples during the recycling process.

POLYMER DEGRADATION AND STABILITY (2021)

Review Thermodynamics

A review of heat pipe technology for foldable electronic devices

Michael J. Gibbons et al.

Summary: The emergence of foldable and wearable devices like Samsung Galaxy Fold and Huawei Mate X has led to a demand for increased battery capacity and processor performance, as well as the need for flexible thermal management solutions. This research provides a comprehensive review of rigid and flexible ultra-thin heat pipe technologies, exploring various types of heat pipes, their thermal performance, novel manufacturing processes, and potential future research directions in this field.

APPLIED THERMAL ENGINEERING (2021)

Review Engineering, Manufacturing

Fused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities

Pratiksha Awasthi et al.

Summary: This review article summarizes the latest advancements in FDM 3D printing of thermoplastic elastomeric materials, focusing on the development of FDM compatible new materials and improving printability. Strategies to overcome defects in 3D printed TPE parts and enhance mechanical properties are provided, along with discussion on future prospects in this rapidly progressing field.

ADDITIVE MANUFACTURING (2021)

Article Chemistry, Physical

Leakage-Proof and Malleable Polyethylene Wax Vitrimer Phase Change Materials for Thermal Interface Management

Li-Mei Peng et al.

Summary: The study prepared polyethylene wax vitrimer (PEWV) through the dioxaborolane exchange reaction for TIMs, which not only solved the leakage problem of polyethylene wax but also improved the thermal energy storage capacity.

ACS APPLIED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Heat conduction of electrons and phonons in thermal interface materials

Yunshan Zhao et al.

Summary: This review summarizes the heat conduction, regulation strategies, thermal measurement techniques, and future research directions of thermal interface materials (TIMs).

MATERIALS CHEMISTRY FRONTIERS (2021)

Review Chemistry, Physical

Nanoencapsulation of phase change materials (PCMs) and their applications in various fields for energy storage and management

Elham Alehosseini et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Review Materials Science, Composites

Recent advances in polymer-based thermal interface materials for thermal management: A mini-review

Chang-Ping Feng et al.

COMPOSITES COMMUNICATIONS (2020)

Review Thermodynamics

Assessment of energy storage technologies: A review

Md Mustafizur Rahman et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Thermodynamics

Brief Historical Perspective in Thermal Management and the Shift Toward Management at the Nanoscale

Justin L. Smoyer et al.

HEAT TRANSFER ENGINEERING (2019)

Review Engineering, Electrical & Electronic

A Review of the Performance and Characterization of Conventional and Promising Thermal Interface Materials for Electronic Package Applications

M. C. Kumar Swamy et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

Article Chemistry, Multidisciplinary

Microencapsulation of Phase Change Materials with Polystyrene/Cellulose Nanocrystal Hybrid Shell via Pickering Emulsion Polymerization

Boya Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Materials Science, Multidisciplinary

Novel nanostructured thermal interface materials: a review

Josef Hansson et al.

INTERNATIONAL MATERIALS REVIEWS (2018)

Article Materials Science, Multidisciplinary

Phase modification and dielectric properties of a cullet-paper ash-kaolin clay-based ceramic

K. A. Samah et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)

Review Materials Science, Multidisciplinary

Thermal transport in polymeric materials and across composite interfaces

Nitin Mehra et al.

APPLIED MATERIALS TODAY (2018)

Article Nanoscience & Nanotechnology

Graphene Aerogel Templated Fabrication of Phase Change Microspheres as Thermal Buffers in Microelectronic Devices

Xuchun Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide

Bernd Wicklein et al.

NATURE NANOTECHNOLOGY (2015)

Article Food Science & Technology

Development of flexible zein-wax composite and zein-fatty acid blend films for controlled release of lysozyme

Iskender Arcan et al.

FOOD RESEARCH INTERNATIONAL (2013)

Article Chemistry, Multidisciplinary

Fabrication and Properties of Microencapsulated Paraffin@SiO2 Phase Change Composite for Thermal Energy Storage

Benxia Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2013)

Article Engineering, Electrical & Electronic

Performance and testing of thermal interface materials

JP Gwinn et al.

MICROELECTRONICS JOURNAL (2003)