☆ 4.7 Article

Piezoelectric hybrid actuation mode to improve speeds in cross-scale micromanipulations

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Triaxial Fast Tool Servo Using Hybrid Electromagnetic-Piezoelectric Actuation for Diamond Turning

Zi-Hui Zhu et al.

Summary: This article reports a high-performance triaxial fast tool servo (FTS) that utilizes hybrid electromagnetic-piezoelectric actuation and a hybrid parallel-serial-kinematic structure. The novel axis-symmetric linearized reluctance actuator is proposed for generating planar motion in parallel, and the piezoactuated vertical motion is carried out serially within a limited space. A two-stage design strategy is developed using finite-element analysis to optimize the system parameters for the triaxial FTS. Trajectory tracking is achieved through loop-shaping tuned PID controllers and a damping controller for planar motion.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

Design and Control of a Spatial Micromanipulator Inspired by Deployable Structure

Fujun Wang et al.

Summary: This article proposes a novel design of a piezoelectrically actuated micromanipulator with spatial structure. The micromanipulator utilizes three-stage amplification to achieve desired output displacement and features a deployable mechanism for a compact structure. The prototype of the micromanipulator exhibits good performance in experimental tests, including a motion stroke of 125 μm, an amplification ratio of 10.84, and a coupling rate of 4.32%. Additionally, the micromanipulator demonstrates a settling time of 23.5 ms with a 2.8% overshoot and a resolution of 0.1 μm. The developed micromanipulator is successfully applied to the operation of small objects with different shapes.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

A Novel Flexure Piezomotor With Minimized Backward and Nonlinear Motion Effect

Sifeng He et al.

Summary: This paper proposes a novel linear piezomotor with centimeter-scale stroke and nanometer-scale resolution. By decoupling the displacement output and introducing a flexure mechanism, continuous, smooth, and highly linear motion output is achieved.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Add to Collection

Article Engineering, Mechanical

Model-based optimization for structure dimension and driving signal of a stick-slip piezoelectric actuator

Jiru Wang et al.

Summary: The paper focuses on optimizing the dimension of a flexible mechanism and the driving signal of a stick-slip piezoelectric actuator. By establishing a dynamic model and using a genetic algorithm to search for optimal parameters, the performance is predicted and an optimized actuator prototype is manufactured. Experiments show that the optimized flexible mechanism provides maximum velocity and driving force, and the improved driving signal enhances velocity performance significantly.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Design of a precise linear-rotary positioning stage for optical focusing based on the stick-slip mechanism

Qingbing Chang et al.

Summary: The study proposed a precise linear-rotary positioning stage (LRPS) based on the stick-slip mechanism for optical focusing, achieving both large stroke and high resolution linear and rotary motions. Experimental results demonstrated excellent performance of the LRPS in both linear and rotary motions, achieving high-resolution optical focusing.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Instruments & Instrumentation

Achieving high speed of the stick-slip piezoelectric actuator at low frequency by using a two-stage amplification mechanism (TSAM)

Chunxue Yi et al.

Summary: This article introduces the design and development of a two-stage amplification mechanism for precision positioning. Comparative analysis confirms the significant improvement in stepping displacement and motion speed compared to traditional mechanisms, while maintaining competitive resolution and loading capacity.

REVIEW OF SCIENTIFIC INSTRUMENTS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Design of a large-range rotary microgripper with freeform geometries using a genetic algorithm

Chen Wang et al.

Summary: This paper presents a novel electrostatically actuated microgripper with freeform geometries designed by a genetic algorithm. The microgripper shows improved performance and can handle micro-objects of different sizes. Experimental results confirm the superior performance of this new design methodology.

MICROSYSTEMS & NANOENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Development of a cross-scale 2-DOF piezoelectric rotary platform based on active friction switching

Shijing Zhang et al.

Summary: This study proposes a novel two degrees of freedom piezoelectric rotary platform that achieves cross-scale rotary motions based on active friction switching. The platform has a large motion range, high resolution, and low coupling motion, making it suitable for driving optical mirrors and other multiple target tasks.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Design and modeling of decoupled miniature fast steering mirror with ultrahigh precision

Wenwen Han et al.

Summary: This study introduces an ultrahigh precision decoupled miniature fast steering mirror, driven by piezoelectric actuators and guided by a ring-type flexible hinge to achieve high-precision deflection and kinematic decoupling. Experimental results showed good closed-loop tracking accuracy for both one-degree-of-freedom and two-degree-of-freedom trajectory tracking control.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Design of a rhombus-type stick-slip actuator with two driving modes for micropositioning

Beichao Shi et al.

Summary: This paper introduces a novel linear stick-slip actuator with a rhombus-type displacement amplification mechanism to enhance performance. The actuator's load capacity is significantly improved with a new driving method, and a stable micropositioning stage is successfully built utilizing this actuator.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Automation & Control Systems

A non-redundant piezoelectric center-rotation platform with a single-layer structure and a large working range

Yuxi Wu et al.

Summary: This paper presents the design, modeling, and testing of a novel single-layer center-rotation platform. The platform achieves pure center rotation by combining an improved Scott-Russell mechanism and a lever-guided structure, and its stability is enhanced by an auxiliary stiffness mechanism. An analytical model based on finite element method is established to investigate the key parameters affecting the platform's performance. Experimental results demonstrate that the platform offers a large rotation angle, high-resolution resolution, and high resonant frequency, making it suitable for precision center rotation.

MECHATRONICS (2022)

Add to Collection

Article Engineering, Mechanical

Theoretical modeling and dynamic characteristics analysis of piezoelectric inertial actuator

Yili Hu et al.

Summary: This paper aims to establish and analyze the theoretical model of the converse wiring method of the piezoelectric inertial actuator based on asymmetrically clamping principle, in order to improve the stability and positioning accuracy of the actuator. Through experiments and simulations, the output characteristics of the actuator under the converse wiring method and the relationship between frictional force and velocity are revealed. Furthermore, the fundamental mechanism of achieving no backward motion and high stability in the actuator under the converse wiring method is explained from a theoretical perspective.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Transfer matrix modeling and experimental verification of forked piezoelectric actuators

Pengpeng Yu et al.

Summary: In this paper, a new modeling method for forked piezoelectric actuators is developed using the transfer matrix method, and its correctness is validated through a case study. The research results demonstrate that the forked connection can transform the vibration direction and realize amplitude amplification.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

A stick-slip piezoelectric actuator with high assembly interchangeability

Zhi Xu et al.

Summary: By replacing the rigid foot with a flexible foot, a method of low stiffness contact was proposed to decrease the assembly requirement and enhance the interchangeability of stick-slip piezoelectric actuators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Development and test of a high speed pusher-type inchworm piezoelectric actuator with asymmetric driving and clamping configuration

Jie Ling et al.

Summary: This paper proposes an asymmetric driving and clamping configuration for a high-speed piezoelectric actuator, along with simplified excitation signal sequences. By designing a lever amplification mechanism and a hexagonal output shaft, the step, clamping force, and load capacity are increased. Through simulations and experiments, it is shown that this actuator significantly improves driving speed and load capacity compared to traditional structures.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Instruments & Instrumentation

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

Shuo Han et al.

Summary: A novel inchworm piezo motor with bender-type PEAs in phalanx distribution was proposed in this paper, which showed high resolution and maximum stroke speed according to experimental results.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Multidisciplinary Sciences

Miniaturized electromechanical devices with multi-vibration modes achieved by orderly stacked structure with piezoelectric strain units

Jinfeng Liu et al.

Summary: This study proposes an orderly stacked structure to achieve all nonzero piezoelectric coefficients and generate artificially coupled multi-vibration modes with ultrahigh strains. A miniature ultrasonic motor based on this structure exhibits a high velocity per volume and a significantly improved moving resolution.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Mechanical

Electromechanical coupling characteristics of double-layer piezoelectric quasicrystal actuators

Yunzhi Huang et al.

Summary: The electromechanical coupling characteristics of a double-layer piezoelectric quasicrystal micro/nano-actuator were studied, with a focus on the effects of van der Waals force and Casimir force on phonon stress and displacement. The study also revealed that the phonon-phason coupling elastic coefficient and nonlocal scale parameter have positive and negative effects on static responses.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Review Instruments & Instrumentation

Recent trends in piezoelectric actuators for precision motion and their applications: a review

S. Mohith et al.

Summary: This review explores the latest advancements in piezoelectric actuator technology, covering aspects such as materials/actuator development, working principles, classifications, design features, and application domains. A comparative study is conducted to evaluate the pros and cons of different actuators.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Automation & Control Systems

A Novel Piezoelectric Inchworm Actuator Driven by One Channel Direct Current Signal

Renming Wang et al.

Summary: This article introduces a novel piezoelectric inchworm actuator driven by a single channel dc signal, aiming to simplify the excitation signal and achieve stable output displacement. The clamping force of the actuator is generated by a dc motor and permanent magnets, with a photoelectric sensor used to detect the position. A mathematical model is established for motion prediction.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Engineering, Mechanical

Displacement amplification and differential actuation in piezo driven nanopositioners

Ali Bazaei et al.

Summary: A novel piezo-driven nanopositioning mechanism in the horizontal plane was studied, achieving highly symmetric positioning with external leverage mechanisms and differential actuation mode. The mechanism provides almost twice the stroke for the output stage compared to conventional non-differential actuation modes, with very small parasitic displacements.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

A bionic inertial piezoelectric actuator with improved frequency bandwidth

Zhi Xu et al.

Summary: This study proposed a bionic inertial piezoelectric actuator inspired by the movement mode of frog's hind legs during swimming. Experimental results showed that the designed actuator had significantly increased frequency bandwidth, maximum motion speed, positioning resolution, and load capacity compared to previously reported inertial actuators. The comprehensive performances of the proposed actuator were significantly improved, benefiting its practical applications.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Performance comparison of two motion modes of a piezoelectric inertial linear motor and its potential application in cell manipulation

Ying Hu et al.

Summary: The novel PILM with two motion modes solves the backward motion issue with the forward-forward motion mode, offering advantages in terms of speed, efficiency, and system stability.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Multidisciplinary Sciences

Measurements of the swimming speeds of motile microorganisms using object tracking and their correlation with water pollution and rheology levels

Ashaa Preyadharishini Shunmugam et al.

Summary: The study demonstrates that the swimming speed of Paramecium aurelia can be used as an indicator of pollutants in water, showing a significant and consistent relationship with the presence of five different contaminants at varying concentrations.

SCIENTIFIC REPORTS (2021)

Add to Collection

Review Engineering, Multidisciplinary

A brief review on the recent evolution in piezoelectric linear ultrasonic motors

Shalini Mukhopadhyay et al.

Summary: This article outlines the recent advancements in linear Piezoelectric Ultrasonic Motors, discussing their construction, operation principles, and expanding applications. Linear ultrasonic motors have been rapidly developing and gaining attention due to their simplicity, performance, and wide range of potential applications in various fields. Research efforts are focused on creating smaller, more efficient designs and materials to optimize output performance and increase longevity through acceptable levels of frictional wear.

ENGINEERING RESEARCH EXPRESS (2021)

Add to Collection

Article Automation & Control Systems

Arthropod-Metamerism-Inspired Resonant Piezoelectric Millirobot

Yingxiang Liu et al.

Summary: The study introduces a millirobot design inspired by arthropod metamerism in nature, achieving fast motion, high resolution, wide speed range, high agility, large load capacity, good adaptability, and miniaturization through the coordination of multiple piezoelectric segments.

ADVANCED INTELLIGENT SYSTEMS (2021)

Add to Collection

Article Robotics

Descending and Ascending Signals That Maintain Rhythmic Walking Pattern in Crickets

Keisuke Naniwa et al.

Summary: The research findings show that the walking gait of crickets is influenced by signals from the head ganglia and the abdominal nervous system, indicating that the brain plays an inhibitory role in initiating leg movements.

FRONTIERS IN ROBOTICS AND AI (2021)

Add to Collection

Article Automation & Control Systems

A Piezoelectric Robotic System for MRI Targeting Assessments of Therapeutics During Dipole Field Navigation

Yunlai Shi et al.

Summary: Dipole field navigation (DFN) is a method for navigating microcarriers towards tumor regions by distorting the magnetic field of an MRI scanner, with a piezoelectric system proposed for precise movement. In vitro experiments showed reliable targeting assessments with magnetic distortions for successful navigation of magnetic microparticles, albeit with some decrease in SNR and minor image distortion.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2021)

Add to Collection

Article Engineering, Mechanical

Theoretical analysis and experimental investigation on a novel self-moving linear piezoelectric stepping actuator

Liang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

A non-resonant sandwich type bidirectional stepping piezoelectric actuator driven by oblique two-dimensional trajectory: Design, analysis and experiment evaluation

Liang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Automation & Control Systems

A Novel Piezoelectric Stack for Rotary Motion by d15 Working Mode: Principle, Modeling, Simulation, and Experiments

Hongpeng Yu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Add to Collection

Review Engineering, Electrical & Electronic

A review on piezoelectric ultrasonic motors for the past decade: Classification, operating principle, performance, and future work perspectives

Xinqi Tian et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Article Chemistry, Analytical

High-Speed Manipulation of Microobjects Using an Automated Two-Fingered Microhand for 3D Microassembly

Eunhye Kim et al.

MICROMACHINES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Designing Ordered Structure with Piezoceramic Actuation Units (OSPAU) for Generating Continual Nanostep Motion

Zhanmiao Li et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A precise rotary positioner driven by piezoelectric bimorphs: Design, analysis and experimental evaluation

Hongpeng Yu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Origami-inspired miniature manipulator for teleoperated microsurgery

Hiroyuki Suzuki et al.

NATURE MACHINE INTELLIGENCE (2020)

Add to Collection

Article Engineering, Mechanical

Development and analysis of a stick-slip rotary piezoelectric positioner achieving high velocity with compact structure

Jiru Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Automation & Control Systems

A XY Transporting and Nanopositioning Piezoelectric Robot Operated by Leg Rowing Mechanism

Jie Deng et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Add to Collection

Article Automation & Control Systems

A Survey of Force-Assisted Robotic Cell Microinjection Technologies

Yuzhang Wei et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2019)

Add to Collection

Review Engineering, Mechanical

A survey of piezoelectric actuators with long working stroke in recent years: Classifications, principles, connections and distinctions

Shupeng Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

A novel U-shaped stepping linear piezoelectric actuator with two driving feet and low motion coupling: Design, modeling and experiments

Xinqi Tian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Review Engineering, Electrical & Electronic

Stepping piezoelectric actuators with large working stroke for nano-positioning systems: A review

Jianping Li et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Engineering, Mechanical

Development of a XYZ scanner for home-made atomic force microscope based on FPAA control

Yanling Tian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

A self-adapting linear inchworm piezoelectric actuator based on a permanent magnets clamping structure

Yunye Gao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Multidisciplinary Sciences

Designing electromechanical metamaterial with full nonzero piezoelectric coefficients

Jikun Yang et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Entomology

Defecation initiates walking in the cricket Gryllus bimaculatus

Keisuke Naniwa et al.

JOURNAL OF INSECT PHYSIOLOGY (2019)

Add to Collection

Article Computer Science, Information Systems

A Novel Linear Walking Type Piezoelectric Actuator Based on the Parasitic Motion of Flexure Mechanisms

Jianming Wen et al.

IEEE ACCESS (2019)

Add to Collection

Article Automation & Control Systems

Design and control of a new 3-PUU fast tool servo for complex microstructure machining

Hui Tang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Automation & Control Systems

Design and Experiments of a Single-Foot Linear Piezoelectric Actuator Operated in a Stepping Mode

Junkao Liu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Add to Collection

Article Engineering, Mechanical

Systematic electromechanical transfer matrix model of a novel sandwiched type flexural piezoelectric transducer

Liang Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Modeling and controller design of a 6-DOF precision positioning system

Kunhai Cai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Multidisciplinary

A novel inchworm type piezoelectric rotary actuator with large output torque: Design, analysis and experimental performance

Shupeng Wang et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Development of a three-DOF piezoelectric actuator using a thin cross-beam vibrator

Liang Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Piezoelectric inchworm rotary actuator with high driving torque and self-locking ability

Siyang Song et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Review Engineering, Mechanical

Survey on Recent Designs of Compliant Micro-/Nano-Positioning Stages

Zeyi Wu et al.

ACTUATORS (2018)

Add to Collection

Article Robotics

The milliDelta: A high-bandwidth, high-precision, millimeter-scale Delta robot

Hayley McClintock et al.

SCIENCE ROBOTICS (2018)

Add to Collection

Article Engineering, Mechanical

A Comprehensive Survey on Microgrippers Design: Operational Strategy

Alden Dochshanov et al.

JOURNAL OF MECHANICAL DESIGN (2017)

Add to Collection

Review Engineering, Mechanical

Piezoelectric Inertia MotorsA Critical Review of History, Concepts, Design, Applications, and Perspectives

Matthias Hunstig

ACTUATORS (2017)

Add to Collection

Article Engineering, Mechanical

Modeling and analysis of stick-slip motion in a linear piezoelectric ultrasonic motor considering ultrasonic oscillation effect

Xiang Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Review Automation & Control Systems

Piezoelectric friction-inertia actuator-a critical review and future perspective

Z. M. Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Automation & Control Systems

Orientation Control of Biological Cells Under Inverted Microscopy

Xinyu Liu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2011)

Add to Collection

Article Microscopy

Rapid overlapping-volume acquisition and reconstruction (ROVAR): automated 3D tiling for high-resolution, large field-of-view optical microscopy

J. L. Schroeder et al.

JOURNAL OF MICROSCOPY (2011)

Add to Collection

Article Automation & Control Systems

Micro-motion devices technology: The state of arts review

P. R. Ouyang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Add to Collection

Article Engineering, Mechanical

Investigation of a 3-DOF micro-positioning table for surface grinding

D. Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.