☆ 4.7 Article

Three-dimensional multi-physics modelling and structural optimization of SOFC large-scale stack and stack tower

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Optimization of a 30 kW SOFC combined heat and power system with different cycles and hydrocarbon fuels

Jieyang Zhou et al.

Summary: This article presents the efficient design of a 30 kW SOFC CHP system based on a commercial kw-level SOFC device. The system achieves cascade utilization of energy and substances, eliminating the need for external water supply. The study investigates the performance, fuel applicability, flexibility, and reliability of the system and identifies an optimized operating condition.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Effect of air flow rate distribution and flowing direction on the thermal stress of a solid oxide fuel cell stack with cross-flow configuration

Ping Yuan et al.

Summary: This study investigates the impact of non-uniform distribution of air inlet flow rate and changes in air flow direction on the thermal stress of a solid oxide fuel cell (SOFC) stack with a cross-flow configuration. The results show that adjusting the air inlet flow rate profile and flow direction can effectively reduce the thermal stress in the SOFC stack.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Thermodynamics

Investigation on the ignition delay prediction model of multi-component surrogates based on back propagation (BP) neural network

Yanqing Cui et al.

Summary: A prediction model for the ignition delay of three-component surrogates was established using a BP neural network, showing that a BP neural network with two hidden layers performs better in predicting ignition delay. Through optimization with genetic algorithm and particle swarm optimization algorithm, a high correlation coefficient was achieved with low mean square error. The analysis of mean impact value revealed the major and minor effects of ambient temperature and molar fraction of iso-octane on ignition delay.

COMBUSTION AND FLAME (2022)

Add to Collection

Article Chemistry, Physical

New interconnector designs for electrical performance enhancement of solid oxide fuel cells: A 3D modelling study

Meiting Guo et al.

Summary: This study proposes several unconventional interconnector (IC) designs for solid oxide fuel cell (SOFC) stack and studies them numerically. Compared with traditional designs, the new IC design can achieve a more uniform distribution of oxygen in the SOFC cathode, leading to improved performance. This improvement can be attributed to the discrete distribution of ribs, reduction of rib size, and spatial layout arrangement of discrete ribs.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Energy & Fuels

Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack

Meiting Guo et al.

Summary: This study developed a 3D thermo-mechanical model to evaluate the mechanical performance of SOFC running on methane fuel. The results showed that the reliability of the whole SOFC stack is favorable when the methane steam pre-reforming ratio (R) is within the range of 0.4-0.7.

APPLIED ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Parametric study of kW-class solid oxide fuel cell stacks fueled by hydrogen and methane with fully multiphysical coupling model

Meiting Guo et al.

Summary: Multiphysics models are important for the design and optimization of solid oxide fuel cells, with computational efficiency improved by symmetry utilization and grid optimization. The model's predictive power is tested against experimental data, and parametric studies show advantages of CH4 and H-2 as fuels for different performance characteristics in kW-class stacks. Insufficient air supply can cause high thermal gradient, and fuel uniformity depends critically on stack design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Wall-function method used to simplify the solid oxide fuel cell model

Shuanglin Shen et al.

Summary: This paper introduces a wall-function method to simplify the SOFC model, which shows similar accuracy to traditional full 3D model but uses fewer mesh elements and solution time. The advantages of the wall-function method include allowing a coarse mesh to reduce computational storage and time significantly, as well as improving model accuracy by introducing other information in wall-functions and denser points in the thickness direction.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Modeling the SOFC by BP neural network algorithm

Shaohui Song et al.

Summary: Solid oxide fuel cells (SOFCs) are complex systems with coupling of multiple physics fields, making performance prediction difficult and high operation temperature challenging for experimental test. Artificial intelligence technology requires less experimental data for accurate modeling. Experimental results show that BP neural network has optimal prediction accuracy, generalization ability, and testing time.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Solid oxide fuel cell: Decade of progress, future perspectives and challenges

Mandeep Singh et al.

Summary: Fuel cells are becoming increasingly popular as a highly efficient, clean, and sustainable energy conversion source with different types having their own pros and cons. Solid oxide fuel cells (SOFC) are gaining attention for their high efficiency and versatility in utilizing various fuels apart from hydrogen. Recent advancements mainly focus on two types of SOFC stack designs and their implications for medium and large power requirements.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

A novel multi-physics and multi-dimensional model for solid oxide fuel cell stacks based on alternative mapping of BP neural networks

Liming Ba et al.

Summary: The paper introduces a new modeling concept called alternative mapping for solving the complex multi-physics and multi-dimensional properties of SOFC stacks using an artificial neural network. The developed stack model is robust and rapid, with results showing close relationships between different physics and dimensional properties. A fully 3D multi-physics and multi-dimensional dynamic simulation of a SOFC stack is implemented for the first time in this report, showing dynamic behaviors of electric-chemical reactions, gas transport, and heat transfer in various positions and operational conditions.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Thermodynamics

Analyzing different planar biogas-fueled SOFC stack designs and their effects on the flow uniformity

Muhammad Adeel Ashraf et al.

ENERGY (2020)

Add to Collection

Article Chemistry, Physical

A novel interconnector design of SOFC

Wei Kong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Numerical modeling of manifold design and flow uniformity analysis of an external manifold solid oxide fuel cell stack

Cheng Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Review Chemistry, Physical

X-ray absorption spectroscopic studies on solid oxide fuel cells and proton -conducting ceramic fuel cells

Koji Amezawa

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

CFD modelling and experimental validation of cell performance in a 3-D planar SOFC

Ismet Tikiz et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Physical

A fully-homogenized multiphysics model for a reversible solid oxide cell stack

Maria Navasa et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Energy & Fuels

Dynamic analysis of direct internal reforming in a SOFC stack with electrolyte-supported cells using a quasi-1D model

Jakub Kupecki et al.

APPLIED ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Numerical simulation of flow distribution for external manifold design in solid oxide fuel cell stack

Cheng Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Review Chemistry, Physical

Novel materials for solid oxide fuel cell technologies: A literature review

Fellipe Sartori da Silva et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Review Chemistry, Physical

Neutron imaging of fuel cells - Recent trends and future prospects

P. Boillat et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2017)

Add to Collection

Article Energy & Fuels

A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks

Ang Li et al.

APPLIED ENERGY (2017)

Add to Collection

Article Thermodynamics

Numerical simulation of cell-to-cell performance variation within a syngas-fuelled planar solid oxide fuel cell stack

Bin Lin et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks

R. T. Nishida et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Review Energy & Fuels

A review on clean energy solutions for better sustainability

Ibrahim Dincer et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2015)

Add to Collection

Article Chemistry, Physical

3D transient thermomechanical behaviour of a full scale SOFC short stack

M. Peksen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection

Article Chemistry, Physical

A coupled 3D thermofluid-thermomechanical analysis of a planar type production scale SOFC stack

M. Peksen

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Add to Collection

Article Chemistry, Physical

A quasi-two-dimensional electrochemistry modeling tool for planar solid oxide fuel cell stacks

Kevin Lai et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Review Green & Sustainable Science & Technology

Mathematical modeling of solid oxide fuel cells: A review

S. Ahmad Hajimolana et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

Add to Collection

Article Chemistry, Physical

A particle-based model for predicting the effective conductivities of composite electrodes

Jay Sanyal et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Electrochemistry

A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells

JH Nam et al.

ELECTROCHIMICA ACTA (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.