☆ 4.7 Article

Investigation of thermal-hydraulic performance of metal-foam heat sink using machine learning approach

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Numerical investigation of water forced convection inside a copper metal foam tub e: Genetic algorithm (GA) base d fuzzy inference system (GAFIS) contribution with CFD modeling

Mahyuddin K. M. Nasution et al.

Summary: This study investigates the efficiency of using AI algorithms, specifically the genetic algorithm-based fuzzy inference system (GAFIS), for reducing computational time in CFD modeling. The results show that GAFIS performs well in predicting pressure, although it has longer prediction times compared to other methods.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal Performance of Metal Foam Heat Sink With Pin Fins for Nonuniform Heat Flux Electronics Cooling

Yongtong Li et al.

Summary: This paper introduces a concept of metal foam heat sink with pin fins (MFPF heat sink) to improve the cooling performance of high-powered electronics with nonuniform heat flux. Numerical simulations show that the MFPF heat sink greatly enhances heat transfer performance due to improved flow distribution and enhanced overall effective thermal conductivity (ETC), leading to lower junction temperatures below 95 degrees C.

JOURNAL OF ELECTRONIC PACKAGING (2021)

Add to Collection

Review Engineering, Electrical & Electronic

A Review of Thermo-Hydraulic Performance of Metal Foam and Its Application as Heat Sinks for Electronics Cooling

Yongtong Li et al.

Summary: This paper reviews the research progress in thermohydraulic performance characterization of metal foams as heat sinks for electronics cooling, highlighting their capability for heat transfer enhancement and the need for further investigation into fundamental mechanisms to develop more efficient and compact heat sinks.

JOURNAL OF ELECTRONIC PACKAGING (2021)

Add to Collection

Article Thermodynamics

Multi-objective optimization of finned metal foam heat sinks: Tradeoff between heat transfer and pressure drop

Nicola Bianco et al.

Summary: In this paper, numerical analysis is used to study optimized design of metal foam heat sinks, proposing a method to simultaneously maximize heat rate and minimize pumping power.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Dissipating the heat generated in high-performance electronics using graphitic foam heat-sinks cooled with a dielectric liquid

Ahmed Alhusseny et al.

Summary: Graphitic foams with unique heat transfer properties are used to form effective heat sinks for dissipating extreme heat in high-performance electronics. Dielectric liquid is utilized as a coolant to sweep away high heat density. The feasibility of the suggested thermal management technique is numerically inspected and confirmed through simulation and algorithm verification.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Universal condensation heat transfer and pressure drop model and the role of machine learning techniques to improve predictive capabilities

Matthew T. Hughes et al.

Summary: A novel universal model has been proposed to predict the condensation frictional pressure drop and heat transfer coefficient for horizontal microchannel and macrochannel flows. Machine learning algorithms, especially the random forest model, were found to predict the data best for pressure drop and heat transfer.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Machine learning algorithms to predict flow boiling pressure drop in mini/micro-channels based on universal consolidated data

Yue Qiu et al.

Summary: A study developed machine learning models to predict pressure drop in two-phase flow in mini/micro-channels, with MAEs of 9.58%, 10.38%, 13.52%, and 14.49% for the optimized ANN, XGBoost, KNN, and LightGBM models. The optimized machine-learning models outperformed traditional pressure drop correlations and showed good performance across different datasets and flow regimes.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Cooling of high-performance electronic equipment using graphite foam heat sinks

Ahmed Alhusseny et al.

Summary: The research employs highly-conductive graphite foams to dissipate heat in electronic components and proposes a novel heat sink configuration using staggered foam baffles to reduce pressure drop and improve heat dissipation. The study shows that the new heat sinks efficiently meet the thermal demands of high-performance electronic equipment, eliminate hot spots, and operate with reasonable pressure drop.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Machine-learning assisted optimization strategies for phase change materials embedded within electronic packages

Meghavin Bhatasana et al.

Summary: By embedding PCMs within the silicon device layer of electronic devices, thermal resistance between the heat source and PCM can be minimized for improved thermal performance. Solder 174 outperforms other organic and metallic PCMs in commercially available materials for fixed geometries. Optimal melting points for minimizing peak temperature are higher than those for minimizing transient temperature oscillation amplitude, and both increase with heater power. Machine learning algorithms are used to optimize geometric and material properties, reducing maximum temperature rise by 19% and fluctuations by up to 93% compared to devices without PCM.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Predictive AI platform on thin film evaporation in hierarchical structures

Parham Jafari et al.

Summary: This study introduces a general AI platform to guide the discovery of hierarchical structures for extreme thermal management of high-performance photonics/electronics, which can effectively predict heat flux in different structures. This predictive platform provides a foundation for addressing the ongoing challenge of thermal management in a broad spectrum of technologies including electronics, hypersonic aviation, and electric vehicles.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Optimization of nanofluid heat transfer in a microchannel heat sink with multiple synthetic jets based on CFD-DPM and MLA

Javad Mohammadpour et al.

Summary: This study combines CFD and machine learning algorithms to optimize the cooling performance of Al2O3water nanofluids, finding that increasing membrane length improves heat transfer and the best heat transfer is achieved at a particle volume fraction of 5%.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Status, Challenges, and Potential for Machine Learning in Understanding and Applying Heat Transfer Phenomena

Matthew T. Hughes et al.

Summary: This study reviews the past and present efforts in using machine learning techniques in the field of heat transfer, discussing the appropriateness of different data-driven ML models in heat transfer problems, and identifies the imminent opportunities and challenges that the heat transfer community faces.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Thermodynamics

Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink

Yongtong Li et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Enhancing thermal-hydraulic performance of counter flow mini-channel heat sinks utilizing secondary flow: Numerical study with experimental validation

Amitav Tikadar et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

An artificial neural network model to predict mini/micro-channels saturated flow boiling heat transfer coefficient based on universal consolidated data

Yue Qiu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams

Justin Broughton et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Thermodynamics

Machine learning for heat transfer correlations

Beomjin Kwon et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

An experimental investigation of the effect of multiple inlet restrictors on the heat transfer and pressure drop in a flow boiling microchannel heat sink

Saad K. Oudah et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Anisotropic convective heat transfer in open-cell metal foams: Assessment and correlations

Marcello Iasiello et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Performance analysis of two-stage thermoelectric generator model based on Latin hypercube sampling

Feng Zhang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Thermodynamics

Machine learning algorithms to predict flow condensation heat transfer coefficient in mini/micro-channel utilizing universal data

Liwei Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Thermal conduction in open-cell metal foams: Anisotropy and Representative Volume Element

M. Iasiello et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Parametric study on thermal and hydraulic characteristics of inter-connected parallel and counter flow mini-channel heat sink

Amitav Tikadar et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Experimental investigation of the impact of geometrical surface modification on spray cooling heat transfer performance in the non-boiling regime

Azzam S. Salman et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Review Energy & Fuels

Review of applications and developments of ultra-thin micro heat pipes for electronic cooling

Heng Tang et al.

APPLIED ENERGY (2018)

Add to Collection

Article Thermodynamics

Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams

Beibei Shen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Electronic cooling using water flow in aluminum metal foam heat sink: Experimental and numerical approach

A. M. Bayomy et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Review Chemistry, Physical

How to Study Thermal Applications of Open-Cell Metal Foam: Experiments and Computational Fluid Dynamics

Sven De Schampheleire et al.

MATERIALS (2016)

Add to Collection

Article Thermodynamics

High resolution microtomography-based CFD simulation of flow and heat transfer in aluminum metal foams

Paola Ranut et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Fluid Flow and Heat Transfer in a Novel Microchannel Heat Sink Partially Filled With Metal Foam Medium

E. Farsad et al.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2014)

Add to Collection

Article Thermodynamics

Heat transfer characteristics of synthetic jet impingement cooling

Mangesh Chaudhari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Pressure drop during air flow in aluminum foams

Simone Mancin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes

W. Lu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

Pressure loss and forced convective heat transfer in an annulus filled with aluminum foam

JS Noh et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

Thermophysical properties of high porosity metal foams

A Bhattacharya et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

Add to Collection

Article Thermodynamics

Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model

PX Jiang et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2001)

Add to Collection

Article Thermodynamics

Forced convection in high porosity metal foams

VV Calmidi et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.