☆ 4.6 Review

A systematic review on digital human models in assembly process planning

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Ergonomics

Research outputs in ergonomics and human factors engineering: a bibliometric and co-word analysis of content and contributions

Akram Sadat Jafari Roodbandi et al.

Summary: This article analyzes research outputs in ergonomics and human factors engineering (EHFE) using bibliometric techniques, co-word analysis, network analysis, and science visualization tools. The findings reveal the productive countries, universities, authors, keywords, co-occurring keywords, and topical clusters within the EHFE fields. The results suggest the maturity of certain clusters like 'biomechanics ergonomics', while others like 'human machine interaction', 'ergonomics design', 'macro-ergonomics', and 'cognitive ergonomics' are either emerging or declining.

INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS (2022)

Add to Collection

Editorial Material Engineering, Mechanical

Human Digital Twin (HDT) Driven Human-Cyber-Physical Systems: Key Technologies and Applications

Baicun Wang et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2022)

Add to Collection

Article Automation & Control Systems

An adaptive human sensor framework for human-robot collaboration

Achim Buerkle et al.

Summary: Manufacturing challenges are increasing, leading to a demand for more agile means of production. Human-robot collaboration can address these challenges by effectively distributing tasks according to each party's strengths. An adaptive human sensor framework incorporating various metrics and machine learning shows promising potential towards enhancing human-robot collaboration.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Industrial

Designing human-system cooperation in industry 4.0 with cognitive work analysis: a first evaluation

Marie-Pierre Pacaux-Lemoine et al.

Summary: The objective of Industry 4.0 is to achieve better system performance and consider humans better by balancing human knowledge and experience with intelligent systems for complex tasks. However, methodological studies are lacking in designing intelligent manufacturing systems, making it difficult to evaluate human awareness and mental workload. Increasing system intelligence and autonomy in Industry 4.0 increases complexity and makes it challenging for humans to understand system behavior and make effective decisions.

COGNITION TECHNOLOGY & WORK (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A reinforcement learning method for human-robot collaboration in assembly tasks

Rong Zhang et al.

Summary: The assembly process of high precision products requires human-robot collaboration to optimize efficiency, but the unpredictability of human behavior poses a challenge. A human-robot collaborative reinforcement learning algorithm has been proposed and validated through experimental analysis to optimize task allocation in assembly processes.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Virtual Reality and Digital Human Modeling for Ergonomic Assessment in Industrial Product Development: A Patent and Literature Review

Adailton Goncalves da Silva et al.

Summary: The late detection of ergonomic component assembly issues during manufacturing processes has negative impacts on operator well-being and productivity, as well as high correction costs. This study aims to analyze the application of virtual reality and digital human modeling for physical ergonomics assessment during product development in the industry. Despite a relative consensus on the benefits of integrating these technologies, their combination is rarely seen in the same analysis and most cases focus on pre-designed production processes.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Robotics

Robotic Assembly of Timber Structures in a Human-Robot Collaboration Setup

Aljaz Kramberger et al.

Summary: This paper presents a framework for the design and robotic assembly of timber structures. The study incorporates learning by demonstration to automate the complex assembly of wooden joints and enables new designs of construction elements previously only possible by skilled craftsmen. The research provides an overview of different focus levels, from digital twin integration to timber joint design and robotic assembly execution, and explores synergistic results in both robotic and construction design innovation, with a perspective on future developments.

FRONTIERS IN ROBOTICS AND AI (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A mathematical formulation for processing time computing in disassembly lines and its optimization

Mahdi Aicha et al.

Summary: Disassembly is crucial in the maintenance and recycling of industrial products. This paper proposes a mathematical formulation that combines quality index and processing time index to select the best disassembly plan. By optimizing the workspace, the timing index can be improved, contributing to the selection of the best disassembly plan.

COMPUTERS & INDUSTRIAL ENGINEERING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Creation of a UX index to design human tasks and workstations

Fabio Grandi et al.

Summary: This paper explores the importance of user experience in human-system interaction, proposing a User eXperience Index to assess and optimize the design of human tasks.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2022)

Add to Collection

Review Computer Science, Artificial Intelligence

Human-centred design in industry 4.0: case study review and opportunities for future research

Hien Nguyen Ngoc et al.

Summary: The transition to Industry 4.0 impacts factories and the entire value chain. Awareness of human roles in this transition is growing, but existing studies often lack coherence and adoption. This study aims to bridge this gap through a systematic review of case studies, providing insights into the evolution of literature and research themes in the context of Human-Centered Design in Industry 4.0.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

Add to Collection

Article Computer Science, Information Systems

Multi-Kinects fusion for full-body tracking in virtual reality-aided assembly simulation

Yu Wang et al.

Summary: This study developed a multi-Kinect fusion algorithm, achieving robust full-body tracking in virtual reality-aided assembly simulation. By evaluating tracking confidence, studying the impact of self-occlusion, and fusing tracking skeletons, the accuracy and robustness of tracking were improved.

INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS (2022)

Add to Collection

Article Engineering, Industrial

YOLO V3+VGG16-based automatic operations monitoring and analysis in a manufacturing workshop under Industry 4.0

Jihong Yan et al.

Summary: Under the background of Industry 4.0 and smart manufacturing, the standardization of operators' actions is crucial for production efficiency and quality. This research proposes a YOLO V3 + VGG 16 transfer learning network to monitor and analyze operators' actions in the manufacturing field. The proposed method achieves high recognition accuracy and low deviation in action execution time, providing guidance for increasing workshop automation and ensuring product quality.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

Add to Collection

Article Environmental Sciences

Multi-Criterial Algorithm for the Efficient and Ergonomic Manual Assembly Process

Maja Turk et al.

Summary: This paper proposes a digital transformation of the manual assembly process by implementing a multi-criterial algorithm to adjust and configure a smart manual assembly workstation, aiming to achieve efficient and ergonomic performance.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Heterogeneous Models Integration for Safety Critical Mechatronic Systems and Related Digital Twin Definition: Application to a Collaborative Workplace for Aircraft Assembly

Faida Mhenni et al.

Summary: Currently, manufacturing systems are shifting towards greater collaboration between humans and robots, involving interdisciplinary design tasks such as systems engineering, safety analyses, and multi-physics modeling. The use of models is necessary during the design phase and beneficial throughout the system life-cycle, and there is a growing demand for a Digital Twin to enhance efficiency in various aspects. This paper presents a design approach that integrates Model-Based Systems Engineering, Model-Based Safety Assessment, and multi-physics modeling to create a collaborative workplace for the assembly of Electro-Mechanical Actuators on an aircraft wing. A meta-model for system models integration within a digital twin framework is also proposed, addressing relevant scientific barriers.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Manufacturing

Product disassembly planning and task allocation based on human and robot collaboration

Imen Belhadj et al.

Summary: This paper presents an interactive disassembly planning approach with human and robot collaboration, which generates optimal strategies and estimates disassembly time based on industrial manufacturing database and relationship matrices. A comparative study demonstrates the effectiveness of the proposed approach in reducing disassembly time and product cost.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2022)

Add to Collection

Article Ergonomics

The Impacts of Human-Cobot Collaboration on Perceived Cognitive Load and Usability during an Industrial Task: An Exploratory Experiment

Etienne Fournier et al.

Summary: Collaborative robots have the potential to positively impact human collaborators in industrial environments. This study found that collaborating with a cobot during an assembly task improved user experience and performance, although it increased completion time.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2022)

Add to Collection

Article Engineering, Manufacturing

A digital twin-based human-robot collaborative system for the assembly of complex-shaped architectures

Zhang Ye et al.

Summary: This study proposes an efficient, flexible, and adaptive approach using Digital Twin in a human-robot collaborative system to improve the efficiency and flexibility of the assembly process for complex-shaped architectures.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2022)

Add to Collection

Article Engineering, Industrial

Reaction force exposure for tightening tool users: A psychophysical based experimental study of electric right-angle nutrunners

A. Mazaheri et al.

Summary: This study aimed to assess the reaction load exposures from right-angle nutrunners and provide recommendations for reaction force levels. The subjective assessments from experienced assembly workers showed no significant differences in acceptable tightening torque, peak reaction force, and handle displacement regardless of tightening strategy, joint stiffness, and work-pace combinations. However, significant differences in acceptable jerk and impulse were observed between the TurboTight and QuickStep tightening strategies. These findings suggest that acceleration and impulse have an impact on the perception of reaction loads.

APPLIED ERGONOMICS (2022)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

COAP: Compositional Articulated Occupancy of People

Marko Mihajlovic et al.

Summary: We propose a novel neural implicit representation for articulating human bodies, which provides an efficient mechanism for modeling interactions with the environment. By decomposing the full-body geometry into local body parts and utilizing a part-aware encoder-decoder architecture, our method improves pose generalization and efficiency.

2022 IEEE/CVF CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION (CVPR) (2022)

Add to Collection

Proceedings Paper Automation & Control Systems

Digital Twin-based Design and Operation of Human-Robot Collaborative Assembly

Yichen Wang et al.

Summary: This paper proposes a Digital Twin-based framework for the design and operation of Human-Robot Collaborative Assembly (HRCA) to achieve deep human-robot collaboration and efficient assembly. The framework enables high assembly efficiency through reasonable task allocation, close communication, and flexible control.

IFAC PAPERSONLINE (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Digital Twin-Based Integrated Assessment of Flexible and Reconfigurable Automotive Part Production Lines

Jinho Yang et al.

Summary: This study presents a digital twin-based integrated reconfiguration assessment application that synchronises with real-time manufacturing data and provides accurate, automated simulation functionality. The effectiveness of the application was verified through its application to an automotive parts production line, demonstrating faster and more accurate reconfiguration assessments compared to existing methods.

MACHINES (2022)

Add to Collection

Article Engineering, Industrial

Modelling job rotation in manufacturing systems with aged workers

Lucia Botti et al.

Summary: The study introduces a bi-objective mathematical model to assign workers to different workstations based on their abilities and workstation requirements, aiming to improve both efficiency and ergonomics.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

Add to Collection

Review Public, Environmental & Occupational Health

Ergonomics 4.0: A bibliometric review of Human Factors research in Industrial Revolution 4.0 (IR 4.0)

Mohammad Babamiri et al.

Summary: The study aimed to create a bibliometric analysis in the related field of Ergonomics and the Fourth Industrial Revolution. Results showed frequent co-occurrence between industry 4.0 and Human Factors, with the USA and Germany being the most productive countries in this area.

WORK-A JOURNAL OF PREVENTION ASSESSMENT & REHABILITATION (2021)

Add to Collection

Article Automation & Control Systems

A capsule-based collision detection approach of irregular objects in virtual maintenance

Yuxue Jin et al.

Summary: The proposed collision detection approach based on encapsulation is suitable for irregular objects in virtual maintenance environment, reducing the number of detection primitives and improving the accuracy of collision detection. The methodology divides the detection process into two stages, achieving better performance in detecting collisions in virtual maintenance simulation.

ASSEMBLY AUTOMATION (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Multi-objective migrating bird optimization algorithm for cost-oriented assembly line balancing problem with collaborative robots

Zixiang Li et al.

Summary: This paper tackles the cost-oriented assembly line balancing problem with collaborative robots by developing a multi-objective mixed-integer programming model to minimize cycle time and total collaborative robot purchasing cost, and using the multi-objective migrating bird optimization algorithm to obtain a set of high-quality Pareto solutions. The developed algorithm produces competing performance in comparison with other existing multi-objective optimization algorithms.

NEURAL COMPUTING & APPLICATIONS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Interactive and Immersive Process-Level Digital Twin for Collaborative Human-Robot Construction Work

Xi Wang et al.

Summary: Human cognition is crucial in construction work, especially in high-level task planning and in-field improvisation, whereas robots excel in numerical computation and precise motion control. Challenges in construction environments and maintaining tight tolerances hinder the wide application of robots in construction work. The proposed I2PL-DT system integrates visualization, task planning, bidirectional communication in virtual reality for collaborative human-robot construction work. In this paradigm, humans focus on task planning and supervision, while robots handle workspace sensing, motion planning, and physical execution.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2021)

Add to Collection

Article Engineering, Industrial

A digital twin-driven human-robot collaborative assembly approach in the wake of COVID-19

Qibing Lv et al.

Summary: In response to the increasing demand for medical equipment production due to COVID-19, a new framework of human-robot collaborative assembly based on digital twin is proposed in this paper. By integrating data from digital twin spaces and using optimization models, the proposed framework improves assembly efficiency and safety.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Feasibility of Detecting Potential Emergencies in Symbiotic Human-Robot Collaboration with a mobile EEG

Achim Buerkle et al.

Summary: Manufacturing challenges are driving collaboration between humans and robots in the same workspace. Safety is a critical factor, where human operators play a key role despite advances in safety systems. A novel approach using human sensors and EEG data shows promising potential for enhancing safety in Human-Robot Collaboration.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Chemistry, Analytical

Web AR Solution for UAV Pilot Training and Usability Testing

Roberto Ribeiro et al.

Summary: The use of trendy technologies such as augmented reality has made it possible to create a virtual simulation solution for drone pilot training and usability testing.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Human-Robot Perception in Industrial Environments: A Survey

Andrea Bonci et al.

Summary: The capability of perception is crucial for human-robot interaction in industrial environments. As industrial settings require higher levels of automation to meet fast-paced and cost-effective market demands, robots must be able to sense human presence and intentions to prevent decreases in productivity and safety hazards. Robots with enhanced perception and interaction capabilities will play an increasingly important role in collaborative and cooperative applications within shared industrial spaces.

SENSORS (2021)

Add to Collection

Article Construction & Building Technology

Brainwave-driven human-robot collaboration in construction

Yizhi Liu et al.

Summary: The study proposes a worker-centered collaborative framework that enables robots to capture workers' brainwaves and adjust their performance accordingly, achieving a high level of communication and cooperation between robots and workers.

AUTOMATION IN CONSTRUCTION (2021)

Add to Collection

Article Engineering, Industrial

Function block-based human-robot collaborative assembly driven by brainwaves

Lihui Wang et al.

Summary: This study explores human-robot collaborative assembly controlled by brainwaves, where brainwaves measured by EEG sensors are converted to time-frequency images using wavelet transform and classified by a convolutional neural network to trigger a network of function blocks for assembly actions. The effectiveness of the system is experimentally validated through an engine-assembly case study.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

How to Make Augmented Reality a Tool for Railway Maintenance Operations: Operator 4.0 Perspective

Sara Scheffer et al.

Summary: This paper explores the importance of an adaptive architectural framework for providing tailored support to railway industry operators using AR technology tools. The research found that AR systems can capture operator knowledge, support maintenance activities, and improve learning capabilities.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

EEG based arm movement intention recognition towards enhanced safety in symbiotic Human-Robot Collaboration

Achim Buerkle et al.

Summary: Consumer markets are moving towards mass customization, requiring assembly processes to adapt to increased product complexity and constant variant updates. A concept to address this trend is close collaboration between human workers and robots. By measuring upper-limb movement intentions with a mobile EEG, early warnings of upcoming movements can improve safety and fluency in Human-Robot Collaboration.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Chemistry, Analytical

Metrological Evaluation of Human-Robot Collaborative Environments Based on Optical Motion Capture Systems

Leticia Gonzalez et al.

Summary: This study introduces a new methodology for the metrological evaluation of a human-robot collaborative environment based on optical motion capture systems. Detailed statistical analysis of error distribution and median comparisons led to the identification of optimal capture areas for the system's use. The results obtained from this method are shown to be comparable in quality to other methods without the need for industrial robot intervention.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

Emotion-Driven Analysis and Control of Human-Robot Interactions in Collaborative Applications

Aitor Toichoa Eyam et al.

Summary: The increasing utilization of robotics systems is driven by the advancement in computational capabilities and communication systems, leading to the concept of Industry 4.0. Challenges in the industrial domain, such as keeping humans in the loop, have led to the development of cobots. An approach utilizing EEG technology to adapt cobot parameters to the emotional state of the human worker has been proposed, aiming to enhance trust and confidence between humans and robots.

SENSORS (2021)

Add to Collection

Article Public, Environmental & Occupational Health

Ergonomic Design of Manual Assembly Workstation Using Digital Human Modeling

Pouya Alipour et al.

Summary: The study found that the ergonomic design of manual assembly workstations among workers in Shiraz electronics industries did not fully comply with ergonomic principles, highlighting the need for targeted interventions to improve their posture. The high prevalence of musculoskeletal symptoms among manual assembly workers emphasizes the importance of implementing ergonomic interventions to address this issue.

ANNALS OF GLOBAL HEALTH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

sEMG-Based Continuous Estimation of Finger Kinematics via Large-Scale Temporal Convolutional Network

Chao Chen et al.

Summary: The study introduces a novel method by applying temporal convolutional network (TCN) to sEMG-based continuous estimation, achieving a precision rate improvement in human-robot interface control.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Computer Science, Information Systems

Cognitive Interaction Analysis in Human-Robot Collaboration Using an Assembly Task

Alejandro Chacon et al.

Summary: In human-robot collaborative assembly tasks, balancing the skills of humans and robots is crucial for maximizing productivity. Through experimental research, it has been demonstrated that operators can handle both high-demanding cognitive tasks and secondary tasks involving robots, minimizing the impact on the primary task and achieving a balance of skills.

ELECTRONICS (2021)

Add to Collection

Article Multidisciplinary Sciences

User-centred design in industrial collaborative automated systems

Simone Luca Pizzagalli et al.

Summary: Autonomous systems and collaborative robotics are key technologies in Industry 4.0, leading to a redefinition of human-machine interaction and collaboration. New paradigms, such as Human Robot Collaboration, are crucial in flexible and dematerialized task scenarios.

PROCEEDINGS OF THE ESTONIAN ACADEMY OF SCIENCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Ergonomics Assessment and Redesign of Helicopter Transmission Assembly Fixture Using Digital Human Models

Oer Koc et al.

Summary: In this study, an assembly fixture for helicopter transmission assembly was designed and analyzed using DHM technique. Testing with RULA and BMA revealed significant ergonomic advantages of the redesigned fixture in compression and moment loading, benefiting workers' comfort and safety during assembly.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI (2021)

Add to Collection

Article Ergonomics

Minimizing Low Back Cumulative Loading during Design of Manual Material Handling Tasks: An Optimization Approach

Sivan Almosnino et al.

Summary: Minimizing LBCL exposure is beneficial during task design phases, and the proposed method takes advantage of DHM capabilities to simulate diverse MMH scenarios and provide solution estimates at the conceptual design phase. The results show a robust and largely similar solution, at least for the MMH scenarios we simulated.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Article Ergonomics

A Collision Avoidance Algorithm for Human Motion Prediction Based on Perceived Risk of Collision: Part 2-Application

James Yang et al.

Summary: Digital human models are widely used in occupational assessments to reduce injury risk in various industries. Human motion prediction, including collision avoidance, plays a crucial role in ensuring realistic predictions. An algorithm has been proposed for such predictions with good correlation to experimental studies, impacting the accuracy of injury risk assessments.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Article Ergonomics

Evaluation of Fatigue and Workload among Workers Conducting Complex Manual Assembly in Manufacturing

Yaniel Torres et al.

Summary: The study found that subjective workload estimates, working evening shifts, and baseline fatigue were main predictors of high fatigue among workers performing complex assembly tasks. Mental demand and frustration were the key predictors of high fatigue among the six dimensions of workload, with mental demand rated highest. Additionally, participants reported less than seven hours of sleep in 60% of the nights evaluated.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Article Ergonomics

Optimization of Productivity and Worker Well-Being by Using a Multi-Objective Optimization Framework

Aitor Iriondo Pascual et al.

Summary: The research aimed to develop a framework for the concurrent optimization of worker well-being and productivity, supporting Ergonomics 4.0 and a human-centered approach in Industry 4.0. The framework allows for consideration of anthropometric diversity in the user group and was successfully demonstrated in a case study scenario with industry partners.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Review Telecommunications

Human-Robot Collaboration Trends and Safety Aspects: A Systematic Review

Janis Arents et al.

Summary: Study examines the levels of collaboration and safety measures in human-robot collaboration systems. Results show that despite close collaboration between humans and robots, 25% of studies did not implement any safety actions, and more than 50% did not use any standards for addressing safety concerns.

JOURNAL OF SENSOR AND ACTUATOR NETWORKS (2021)

Add to Collection

Article Ergonomics

A Collision Avoidance Algorithm for Human Motion Prediction Based on Perceived Risk of Collision: Part 1-Model Development

James Yang et al.

Summary: This study aims to enhance the realism of human motion prediction by introducing a novel collision avoidance algorithm that minimizes perceived risk. Experimental results suggest that perceived risk modeling can play a crucial role in human motion prediction, potentially providing a more versatile and general prediction framework.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Review Ergonomics

A Review and Qualitative Meta-Analysis of Digital Human Modeling and Cyber-Physical-Systems in Ergonomics 4.0

Gunther Paul et al.

Summary: Industry 4.0 is an ecosystem that integrates elements such as the Internet of Things, Cloud Platforms, and Cognitive Computing, enabling the integration of Ergonomics 4.0 through digital transformation. A qualitative meta-analysis was carried out to identify the determinants and interrelationships of Ergonomics 4.0, proposing a conceptual framework focused on Digital Human Modeling and Cyber-Physical Systems.

IISE TRANSACTIONS ON OCCUPATIONAL ERGONOMICS & HUMAN FACTORS (2021)

Add to Collection

Proceedings Paper Computer Science, Theory & Methods

Anterior-Posterior Center of Pressure Analysis for the DIP/VIP Balance Maintenance model: Formalization and Preliminary Results

Andrea Tigrini et al.

Summary: This study investigates the use of the DIP/VIP model in studying human-like balance control and its functional rearrangement through parametric changes.

2021 10TH INTERNATIONAL IEEE/EMBS CONFERENCE ON NEURAL ENGINEERING (NER) (2021)

Add to Collection

Article Behavioral Sciences

Using Digital and Physical Simulation to Focus on Human Factors and Ergonomics in Aviation Maintainability

Fabien Bernard et al.

HUMAN FACTORS (2020)

Add to Collection

Article Automation & Control Systems

An integrated operation feasibility analysis method for manual assembly and disassembly in restricted space

Wenmin Zhu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Mathematical model and bee algorithms for mixed-model assembly line balancing problem with physical human-robot collaboration

Zeynel Abidin Cil et al.

APPLIED SOFT COMPUTING (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Plug-and-play supervisory control using muscle and brain signals for real-time gesture and error detection

Joseph DelPreto et al.

AUTONOMOUS ROBOTS (2020)

Add to Collection

Article Engineering, Biomedical

Joint torque estimation for the human arm from sEMG using backpropagation neural networks and autoencoders

Yanjiang Huang et al.

BIOMEDICAL SIGNAL PROCESSING AND CONTROL (2020)

Add to Collection

Proceedings Paper Engineering, Industrial

Application of Multi-objective Optimization on Ergonomics in Production - A Case Study

Aitor Iriondo Pascual et al.

ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING (2020)

Add to Collection

Article Engineering, Industrial

A maintenance time estimation method based on virtual simulation and improved modular arrangement of predetermined time standards

Jiayu Chen et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2020)

Add to Collection

Article Computer Science, Information Systems

Natural Virtual Reality User Interface to Define Assembly Sequences for Digital Human Models

Andreas Geiger et al.

APPLIED SYSTEM INNOVATION (2020)

Add to Collection

Article Engineering, Mechanical

Efficacy Investigation of Virtual Reality Teaching Module in Manufacturing System Design Course

Junfeng Ma et al.

JOURNAL OF MECHANICAL DESIGN (2019)

Add to Collection

Article Engineering, Industrial

A human modelling and monitoring approach to support the execution of manufacturing operations

Marcello Urgo et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

People tracking with range cameras using density maps and 2D blob splitting

Izaak Van Crombrugge et al.

INTEGRATED COMPUTER-AIDED ENGINEERING (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

Human action recognition using hierarchic body related occupancy maps

Sanne Roegiers et al.

INTEGRATED COMPUTER-AIDED ENGINEERING (2019)

Add to Collection

Article Engineering, Industrial

Balancing high operator's workload through a new job rotation approach: Application to an automotive assembly line

S. E. Moussavi et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2019)

Add to Collection

Article Automation & Control Systems

Shared control of a robotic arm using non-invasive brain-computer interface and computer vision guidance

Yang Xu et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Automatic visibility evaluation method for application in virtual prototyping environment

Weiwei Wu et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Current research and future perspectives on human factors and ergonomics in Industry 4.0

Bzhwen A. Kadir et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

Add to Collection

Proceedings Paper Automation & Control Systems

Ergonomics Simulation in Aircraft Manufacturing - Methods and Potentials

Florian Beuss et al.

52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS) (2019)

Add to Collection

Proceedings Paper Automation & Control Systems

Real-time assistance to manual assembly through depth camera and visual feedback

Maurizio Faccio et al.

52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS) (2019)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Augmented Reality for Human-Robot Cooperation in Aircraft Assembly

Andreas Luxenburger et al.

2019 IEEE INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE AND VIRTUAL REALITY (AIVR) (2019)

Add to Collection

Article Computer Science, Information Systems

Simulation of body extension motion based on dynamics virtualization

Yexian Wang

CLUSTER COMPUTING-THE JOURNAL OF NETWORKS SOFTWARE TOOLS AND APPLICATIONS (2019)

Add to Collection

Article Automation & Control Systems

A semi-automatic approach to implement rapid non-immersive virtual maintenance simulation

Jie Geng et al.

ASSEMBLY AUTOMATION (2018)

Add to Collection

Article Engineering, Industrial

Workplace analysis and design using virtual reality techniques

George Michalos et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Automation & Control Systems

Robust Human Activity Recognition using smartwatches and smartphones

Ruben San-Segundo et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2018)

Add to Collection

Article Automation & Control Systems

A wavelet tensor fuzzy clustering scheme for multi-sensor human activity recognition

Hong He et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2018)

Add to Collection

Article Automation & Control Systems

Simulation data integration-based approach for motion synthesis in virtual maintenance

Jie Geng et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Automation & Control Systems

Mutual trust-based subtask allocation for human-robot collaboration in flexible lightweight assembly in manufacturing

S. M. Mizanoor Rahman et al.

MECHATRONICS (2018)

Add to Collection

Article Multidisciplinary Sciences

A quantitative assessment method for the space design of products based on ergonomics and virtual simulation

Ziyue Guo et al.

PLOS ONE (2018)

Add to Collection

Article Robotics

Active Collision Avoidance for Human-Robot Interaction With UKF, Expert System, and Artificial Potential Field Method

Guanglong Du et al.

FRONTIERS IN ROBOTICS AND AI (2018)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Digital twins of human robot collaboration in a production setting

Ali Ahmad Malik et al.

28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY (2018)

Add to Collection

Proceedings Paper Engineering, Biomedical

Improved Ergonomic Risk Factor Assessment Using OpenSim and Inertial Measurement Units

Jonathan Mortensen et al.

2018 IEEE/ACM INTERNATIONAL CONFERECE ON CONNECTED HEALTH: APPLICATIONS, SYSTEMS AND ENGINEERING TECHNOLOGIES (CHASE) (2018)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Improved Motion Capture Processing for High-Fidelity Human Models Using Optimization-Based Prediction of Posture and Anthropometry

Anna Seydel et al.

ADVANCES IN HUMAN FACTORS IN SIMULATION AND MODELING (AHFE 2017) (2018)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Optimization-Based Simulation of the Motion of a Human Performing a Horizontal Drop Jump

Mahdiar Hariri et al.

ADVANCES IN HUMAN FACTORS IN SIMULATION AND MODELING (AHFE 2017) (2018)

Add to Collection

Proceedings Paper Engineering, Mechanical

On the use of Virtual Reality for a human-centered workplace design

F. Caputo et al.

AIAS2017 - 46TH CONFERENCE ON STRESS ANALYSIS AND MECHANICAL ENGINEERING DESIGN (2018)

Add to Collection

Proceedings Paper Automation & Control Systems

Virtual maintenance simulation for socially sustainable serviceability

Margherita Peruzzini et al.

27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)

Add to Collection

Article Engineering, Industrial

Human-robot collaborative assembly in cyber-physical production: Classification framework and implementation

Xi Vincent Wang et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Multidisciplinary Sciences

REBA EVALUATION ON GARAGE WORKER: A CASE STUDY

A. Shukriah et al.

JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES (2017)

Add to Collection

Article Automation & Control Systems

Implementation and evaluation of a model processing pipeline for assembly simulation

Robert Iacob et al.

ASSEMBLY AUTOMATION (2017)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Virtual Human Motion Design and Ergonomics Analysis in Maintenance Simulation

Fuyang Yu et al.

ADVANCES IN APPLIED DIGITAL HUMAN MODELING AND SIMULATION (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Intervertebral reaction force prediction using an enhanced assembly of OpenSim models

Marco Senteler et al.

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Disassembly operations' efficiency evaluation in a virtual environment

C. G. Wang et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2016)

Add to Collection

Article Automation & Control Systems

An interactive virtual lighting maintenance environment for human factors evaluation

Qichang He et al.

ASSEMBLY AUTOMATION (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

Genetic algorithms for the scheduling problem with arbitrary precedence relations and skilled operators

Raul Mencia et al.

INTEGRATED COMPUTER-AIDED ENGINEERING (2016)

Add to Collection

Proceedings Paper Engineering, Industrial

Controller hierarchies for efficient virtual ergonomic assessments of manual assembly sequences

P. Mardberg et al.

6TH CIRP CONFERENCE ON ASSEMBLY TECHNOLOGIES AND SYSTEMS (CATS) (2016)

Add to Collection

Proceedings Paper Engineering, Industrial

Interactive planning of manual assembly operations: from language to motion

Stephan Busemann et al.

RESEARCH AND INNOVATION IN MANUFACTURING: KEY ENABLING TECHNOLOGIES FOR THE FACTORIES OF THE FUTURE - PROCEEDINGS OF THE 48TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2016)

Add to Collection

Article Engineering, Industrial

Ergonomic design of crane cabin interior: The path to improved safety

V. K. Spasojevic Brkic et al.

SAFETY SCIENCE (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Computer-automated ergonomic analysis based on motion capture and assembly simulation

Sajeev C. Puthenveetil et al.

VIRTUAL REALITY (2015)

Add to Collection

Proceedings Paper Automation & Control Systems

Comparison of Digital Tools for Ergonomics in Practice

Patrik Polasek et al.

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Application of a Virtual and Ergonomic Framework for an Industrial Light Vehicle Concept Assembly Process: a case report

A. Sanchez et al.

MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 (2015)

Add to Collection

Article Automation & Control Systems

Human factors automatic evaluation for entire maintenance processes in virtual environment

Shiguang Qiu et al.

ASSEMBLY AUTOMATION (2014)

Add to Collection

Article Automation & Control Systems

Automatic disassembly navigation for accurate virtual assembly path planning

Wanbin Pan et al.

ASSEMBLY AUTOMATION (2014)

Add to Collection

Article Engineering, Industrial

CAD model based virtual assembly simulation, planning and training

Ming C. Leu et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Automation & Control Systems

Fusing multiple image transformations and a thermal sensor with kinect to improve person detection ability

L. Susperregi et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2013)

Add to Collection

Review Behavioral Sciences

Examining the Interaction of Force and Repetition on Musculoskeletal Disorder Risk: A Systematic Literature Review

Sean Gallagher et al.

HUMAN FACTORS (2013)

Add to Collection

Article Engineering, Mechanical

Digital Human Forward Kinematic and Dynamic Reliabilities

Jared Gragg et al.

JOURNAL OF MECHANICAL DESIGN (2013)

Add to Collection

Article Engineering, Aerospace

Virtual reality: Avatars in human spaceflight training

Jeffrey Osterlund et al.

ACTA ASTRONAUTICA (2012)

Add to Collection

Article Computer Science, Software Engineering

Hybrid method for driver accommodation using optimization-based digital human models

Jared Gragg et al.

COMPUTER-AIDED DESIGN (2012)

Add to Collection

Article Engineering, Industrial

The effects of joint torque, pace and work: rest ratio on powered hand tool operations

Jia-Hua Lin et al.

ERGONOMICS (2012)

Add to Collection

Article Biophysics

Physics-Based Seated Posture Prediction for Pregnant Women and Validation Considering Ground and Seat Pan Contacts

Bradley Howard et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2012)

Add to Collection

Proceedings Paper Engineering, Industrial

Virtual Ergonomics and Time Optimization of a Railway Coach Assembly Line

A. Marzano et al.

45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)

Add to Collection

Article Engineering, Multidisciplinary

Concurrent motion planning and reaction load distribution for redundant dynamic systems under external holonomic constraints

Joo H. Kim et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)

Add to Collection

Article Robotics

Multi-objective optimization-based method for kinematic posture prediction: development and validation

Jingzhou (James) Yang et al.

ROBOTICA (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Fuzzy approach for maintainability evaluation in the design process

Corneliu-Alexandru Slavila et al.

CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS (2005)

Add to Collection

Article Neurosciences

Optimal compensation for changes in task-relevant movement variability

J Trommershäuser et al.

JOURNAL OF NEUROSCIENCE (2005)

Add to Collection

Article Engineering, Manufacturing

ErgoSAM:: A preproduction risk identification tool

J Laring et al.

HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING (2005)

Add to Collection

Article Engineering, Industrial

Development of risk filter and risk assessment worksheets for HSE guidance - 'Upper Limb Disorders in the Workplace' 2002

RJ Graves et al.

APPLIED ERGONOMICS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.