Improvement in the high temperature mechanical properties of additively manufactured Ti-48Al-2Cr-2Nb alloy using heat treatment

Gamma Ti-48Al-2Cr-2Nb (Ti4822) alloy, which is manufactured by an electron beam melting (EBM) process, has excellent ductility but poor high-temperature strength, because it has a near gamma structure. The objective of this study was to control the microstructure of Ti4822 by considering various forms of heat treatment to improve the mechanical properties at room and high temperatures. The heat treatment conditions were varied to create nearly lamellar (NL) and fully-lamellar (FL) structures. First, the EBM-built NL-Ti4822 exhibited a lamellar structure with an average layer thickness of about 92 nm and equiaxed gamma-phase particles with a size of several tens of micrometers. On the other hand, the EBM-built FL-Ti4822 had an average lamellar thickness of about 347.2 nm, but in this case the equiaxed gamma phase was not observed. The results of the room-and high-temperature compression test showed that the mechanical properties of the two heat-treated materials were significantly superior to those of the as-built Ti4822 across all temperature ranges. Moreover, both materials were highly ductile at room and high temperature despite having a lamellar structure, and exhibited intensified yield stress anomaly and dynamic recrystallization as the fraction of lamellar structure increased. Based on the above results obtained by subjecting the materials to different heat treatment methods, the effects of the microstructures of the two materials on the mechanical properties and deformation mechanisms at room and high temperatures were investigated.

Automated summary

The microstructure of the Ti4822 alloy, manufactured by EBM, was controlled through various heat treatment methods to improve mechanical properties at different temperatures. The results showed that Ti4822 with a thinner lamellar structure exhibited better mechanical properties and high ductility at room and high temperatures. Moreover, an increased fraction of the lamellar structure resulted in intensified yield stress anomaly and dynamic recrystallization.