4.7 Article

Integrating a Ferroelectric Interface with a Well-Tuned Electronic Structure in Lithium-Rich Layered Oxide Cathodes for Enhanced Lithium Storage

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Countering Voltage Decay, Redox Sluggishness, and Calendering Incompatibility by Near-Zero-Strain Interphase in Lithium-Rich, Manganese-Based Layered Oxide Electrodes

Weitao He et al.

Summary: By constructing a coherent near-zero-strain interphase on the grain boundaries of cathode secondary particles using the reactive infiltration method (RIM), infusing LiAlO2 material, this study demonstrates enhanced electrochemical cyclability, rate capability, and industrial calendaring performance of lithium-rich, manganese-based layered oxides, marking a significant step toward commercial implementation.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Ultrasound-driven ferroelectric polarization of TiO2/Bi0.5Na0.5TiO3 heterojunctions for improved sonocatalytic activity

Mingxuan Sun et al.

Summary: A series of TiO2/Bi0.5Na0.5TiO3 heterojunctions with different mass ratios were first constructed under ultrasound irradiation, demonstrating superior sonocatalytic and photoelectrochemical properties. The enhancement in performance can be attributed to the internal electric field and close interfacial contact between TiO2 and Bi0.5Na0.5TiO3, facilitating the transfer of photoinduced electrons.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Regulating oxygen covalent electron localization to enhance anionic redox reversibility of lithium-rich layered oxide cathodes

Chunxiao Zhang et al.

Summary: This study proposes a La/Al co-doping strategy to address the irreversibility of anionic redox reactions by tuning the electronic structure. The co-doped LMNLAO cathode exhibits outstanding cycling stability with a capacity retention of 93.6% after 200 cycles.

ENERGY STORAGE MATERIALS (2022)

Article Engineering, Environmental

Constructing novel binary Bi0.5Na0.5TiO3-based composite ceramics for excellent energy storage performances via defect engineering

Yihao Shen et al.

Summary: This article introduces a method to improve the energy storage density of electrostatic capacitors by adjusting the structure of ceramics to achieve large polarization and high breakdown electric field. The experimental results show that excellent energy density, discharge efficiency, thermal endurance, fatigue endurance, and frequency stability can be achieved using this method.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Dynamic Regulation of Lithium Dendrite Growth with Electromechanical Coupling Effect of Soft BaTiO3 Ceramic Nanofiber Films

Shuhui Xia et al.

Summary: A soft BaTiO3 ceramic nanofiber film with excellent ferroelectricity and piezoelectricity is reported for regulating the deposition of Li metal, addressing the issue of dendrite growth in lithium metal batteries. Experimental results demonstrate that Li-Cu cells using this film exhibit high Coulombic efficiency over 200 cycles, while LMBs paired with high-voltage cathodes maintain 80% capacity in 300 cycles.

ACS NANO (2021)

Article Electrochemistry

Synergetic effects of cation (K+) and anion (S2-)-doping on the structural integrity of Li/Mn-rich layered cathode material with considerable cyclability and high-rate capability for Li-ion batteries

Rakesh Saroha et al.

Summary: This study presents an effective strategy of co-doping to delay structural variations and inhibit transition metal migration in Li-rich cathode materials for lithium-ion batteries, resulting in improved cycling stability and high-rate capability.

ELECTROCHIMICA ACTA (2021)

Article Materials Science, Multidisciplinary

Structural insights into composition design of Li-rich layered cathode materials for high-energy rechargeable battery

Chong Yin et al.

Summary: The study systematically investigated the structural characteristics of Li-rich cathode materials, discovering the sensitivity of oxygen redox activation to local Co coordination environments. Co ions were found to enhance the activation of Li2MnO3-like domains, leading to higher reversible capacity.

MATERIALS TODAY (2021)

Article Chemistry, Multidisciplinary

Strain-Engineered Nano-Ferroelectrics for High-Efficiency Piezocatalytic Overall Water Splitting

Ran Su et al.

Summary: The study successfully enhanced the piezoelectricity of BaTiO3 nanoparticles by inducing heteroepitaxial strain through surface reconstruction, leading to significantly improved water-splitting activity. This approach offers a generic method for designing highly efficient piezoelectric nanomaterials and has potential applications in other perovskite oxides.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Tailoring bulk Li+ ion diffusion kinetics and surface lattice oxygen activity for high-performance lithium-rich manganese-based layered oxides

Ruizhi Yu et al.

Summary: This study presents a successful strategy to enhance the Li+ ion diffusivity of LRMOs by introducing Te6+ and forming a protective layer on the material surface to inhibit structural degradation. The modified material exhibits good cycling performance and rate capability, with significantly reduced voltage decay during cycling.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Insights into the Enhanced Structural and Thermal Stabilities of Nb-Substituted Lithium-Rich Layered Oxide Cathodes

Chunxiao Zhang et al.

Summary: The study proposes a method to improve the thermal stability and cycle life of Li1.2Mn0.53Ni0.27O2 cathode material for lithium-ion batteries by doping with niobium, showing potential for industrial application.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Strain-Induced Ferroelectric Heterostructure Catalysts of Hydrogen Production through Piezophototronic and Piezoelectrocatalytic System

Syuan-Lin Guo et al.

Summary: A piezoelectrocatalytic system composed of BaTiO3@MoSe2 nanosheets has been discovered, exhibiting a high H-2 production rate and promising potential for environmental remediation and clean energy development through a combination of piezoelectric potential and electrocatalytic effects.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

A Universal Strategy toward the Precise Regulation of Initial Coulombic Efficiency of Li-Rich Mn-Based Cathode Materials

Weibin Guo et al.

Summary: This study proposes a simple interface engineering method to effectively improve the initial Coulombic efficiency and rate performance of LRM. By introducing cation/anion double defects and in situ surface reconstruction layer, the diffusion barrier of Li+ ions can be reduced and the surface lattice oxygen can be stabilized. This simple interface engineering method is universal and can effectively enhance the ICE of other types of LRM.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Improvement of electrochemical reversibility of the Ni-Rich cathode material by gallium doping

Liping Wu et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Multidisciplinary

Shaping Li Deposits from Wild Dendrites to Regular Crystals via the Ferroelectric Effect

Yanpeng Guo et al.

NANO LETTERS (2020)

Review Chemistry, Physical

Oxygen Release Degradation in Li-Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches

Soroosh Sharifi-Asl et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Insight of a Phase Compatible Surface Coating for Long-Durable Li-Rich Layered Oxide Cathode

Sijiang Hu et al.

ADVANCED ENERGY MATERIALS (2019)

Article Electrochemistry

Effect of Al and Zr co-doping on electrochemical performance of cathode Li[Li0.2Ni0.13Co0.13Mn0.54]O-2 for Li-ion battery

Milad Ghorbanzadeh et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Article Chemistry, Physical

Improving rate capability and decelerating voltage decay of Li-rich layered oxide cathodes by chromium doping

Huimian Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Nanoscience & Nanotechnology

Facile Mn Surface Doping of Ni-Rich Layered Cathode Materials for Lithium Ion Batteries

Woosuk Cho et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Surface Doping to Enhance Structural Integrity and Performance of Li-Rich Layered Oxide

Shuai Liu et al.

ADVANCED ENERGY MATERIALS (2018)

Article Electrochemistry

Synthesis and performances of Li-Rich@AlF3@Graphene as cathode of lithium ion battery

Dongrui Chen et al.

ELECTROCHIMICA ACTA (2016)

Article Multidisciplinary Sciences

A stable lithium-rich surface structure for lithium-rich layered cathode materials

Sangryun Kim et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Operando Lithium Dynamics in the Li-Rich Layered Oxide Cathode Material via Neutron Diffraction

Haodong Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Article Multidisciplinary Sciences

Unravelling structural ambiguities in lithium- and manganese-rich transition metal oxides

Alpesh Khushalchand Shukla et al.

NATURE COMMUNICATIONS (2015)

Article Physics, Applied

High-rate performance of ferroelectric BaTiO3-coated LiCoO2 for Li-ion batteries

Takashi Teranishi et al.

APPLIED PHYSICS LETTERS (2014)

Article Chemistry, Physical

Structural Changes in Li2 MnO 3 Cathode Material for Li- Ion Batteries

Jatinkumar Rana et al.

ADVANCED ENERGY MATERIALS (2014)

Article Chemistry, Multidisciplinary

Direct Atomic-Resolution Observation of Two Phases in the Li1.2Mn0.567Ni0.166Co0.067O2 Cathode Material for Lithium-Ion Batteries

Haijun Yu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Article Chemistry, Physical

In situ investigations of a Li-rich Mn-Ni layered oxide for Li-ion batteries

Loic Simonin et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Article Chemistry, Multidisciplinary

VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)