☆ 4.8 Article

Integrated CM Inductor for Both DC and AC Noise Attenuation in DC-Fed Motor Drive Systems

IEEE TRANSACTIONS ON POWER ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

A Mathematical Design Approach to Volumetric Optimization of EMI Filter and Modeling of CM Noise Sources in a Three-Phase PFC

Saikat Dey et al.

Summary: This article presents a systematic approach to design an EMI filter for power electronic converters, specifically for three-phase ac-dc active boost rectifier systems. The design optimization of the differential mode filter stage is demonstrated, as well as the optimization of the common mode filter stage through mathematical noise modeling and volume optimization. The proposed design methodology is validated through MATLAB simulation and experimental verification for compliance with the stringent EMI requirements of DO-160F standard.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Compact EMI Filter Design by Reducing the Common-Mode Inductance With Chaotic PWM Technique

Hong Li et al.

Summary: This article proposes a method to reduce the volume of common-mode inductors using chaotic pulse-width modulation (CPWM), and verifies its effectiveness and feasibility through experiments.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Fully Integrated Common-Mode Choke Design Embedded With Differential-Mode Capacitances

Shiqi Jiang et al.

Summary: This article investigates the potential of the emerging flexible multilayer foils (FMLFs)-based winding design to promote magnetic integration technique in power electronic systems. Through full integration of a single-phase electromagnetic interference (EMI) choke, the common-mode (CM) and differential-mode (DM) filtering elements can be combined into the same core unit. Experimental measurements demonstrate the effectiveness of the proposed model.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

EMI Filter Robustness in Three-Level Active Neutral-Point-Clamped Inverter

Zhan Shen et al.

Summary: This article proposes a robustness assessment procedure for evaluating the stability of the EMI filter during long-term operation. By using mission profile to emulate the operating environment, the nonlinear degradation models of passive components are established, and the uncertainty of model parameters is considered using the Monte Carlo method. Finally, the effectiveness of the evaluation procedure is demonstrated through experiments.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Review Engineering, Electrical & Electronic

A Review of Flexible Multilayer Foil Integration Technology for Passive Components

Cheng Deng et al.

Summary: Passive integration technology, particularly the flexible multilayer foil (FMLF) integration technology, is highlighted for its ability to reduce passive component volume and improve power density, surpassing other integration methods. The article summarizes the realization, structures, and applications of FMLF, investigates the materials used, and introduces analysis and design approaches. By comparing it with planar printed circuit board integration technology, the advantages of FMLF's characteristics are emphasized, shedding light on its future research fields for power electronics engineers and researchers.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

An Integrated EMI Choke With Improved DM Inductance

Javad Borsalani et al.

Summary: This article presents a new integrated choke with a specific winding structure, which can independently increase the DM inductance through coil design, while the CM inductance value remains almost constant compared to conventional chokes. Theoretical analysis for modeling the choke and prediction of inductances and saturation conditions are provided, with experimental measurements validating the analysis and demonstrating good filtering performance in rejecting conducted noise from an induction motor drive system while decreasing the overall filter size.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Co-Reduction of Common Mode Noise and Loop Current of Three-Level Active Neutral Point Clamped Inverters

Jianing Wang et al.

Summary: The relationship between CM noise and loop current of the three-level ANPC inverter is analyzed for the first time, with a proposed co-reduction method that can suppress both. The method's extra cost and volume are negligible, and a design guideline is provided for clarity, validated by experiment.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Common-Mode Current Reduction at DC and AC Sides in Inverter Systems by Passive Cancellation

Lihong Xie et al.

Summary: The article proposes a passive cancellation method using two CM transformers to reduce CM noise at both sides simultaneously, regardless of the CM impedance of the source or the load. In experiments, the proposed method achieves a 40 dB reduction in noise, confirming its effectiveness.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling and Design of the Magnetic Integration of Single- and Multi-Stage EMI Filters

Yitao Liu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Common Mode Noise Reduction of Three-Level Active Neutral Point Clamped Inverters With Uncertain Parasitic Capacitance of Photovoltaic Panels

Jianing Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Automation & Control Systems

A CM Filter Configuration for Grid-Tied Voltage Source Converters

Srinivas Gulur et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Motor CM Impedance Based Transformerless Active EMI Filter for DC-Side Common-Mode EMI Suppression in Motor Drive System

Yechi Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Reducing Common-Mode Voltage and Bearing Currents in Quasi-Resonant DC-Link Inverter

Marek Turzynski et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Elimination of Common-Mode Choke Saturation Caused by Self-Resonance of the EMI Filter in a Variable-Frequency Drive System

Henglin Chen et al.

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Optimization Method of CM Inductor Volume Taking Into Account the Magnetic Core Saturation Issues

Bilel Zaidi et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

A Fast and Precise Method for Modeling EMI Source in Two-Level Three-Phase Converter

Yangxiao Xiang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Add to Collection

Article Automation & Control Systems

Common-Mode EMI Noise Modeling and Reduction With Balance Technique for Three-Level Neutral Point Clamped Topology

Huan Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Design and Performance Evaluation of a High Power-Density EMI Filter for PWM Inverter-Fed Induction-Motor Drives

Guido Ala et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2016)

Add to Collection

Article Engineering, Multidisciplinary

PWM Impact on CM Noise and AC CM Choke for Variable-Speed Motor Drives

Dong Jiang et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Design of a Hybrid Busbar Filter Combining a Transmission-Line Busbar Filter and a One-Turn Inductor for DC-Fed Three-Phase Motor Drive Systems

Fang Luo et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

A Common-Mode Choke Using Toroid-EQ Mixed Structure

Wenhua Tan et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Conducted Common-Mode EMI Reduction by Impedance Balancing

Lei Xing et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

Add to Collection

Article Engineering, Electrical & Electronic

Analytical Wideband Model of a Common-Mode Choke

Marinko Kovacic et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

Add to Collection

Article Engineering, Electrical & Electronic

An Integrated AC Choke Design for Common-Mode Current Suppression in Neutral-Connected Power Converter Systems

Ning Zhu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)

Add to Collection

Article Automation & Control Systems

The Three-Phase Common-Mode Inductor: Modeling and Design Issues

Marcelo Lobo Heldwein et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)

Add to Collection

Article Engineering, Electrical & Electronic

High-Density EMI Filter Design for DC-Fed Motor Drives

Yoann Maillet et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Analysis of CM Volt-Second Influence on CM Inductor Saturation and Design for Input EMI Filters in Three-Phase DC-Fed Motor Drive Systems

Fang Luo et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Impact of EMC Filters on the Power Density of Modem Three-Phase PWM Converters

Marcelo Lobo Heldwein et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Attenuation of conducted EMI emissions from an inverter-driven motor

Hirofumi Akagi et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2008)

Add to Collection

Article Engineering, Industrial

What can bearings bear? How much current is too much? How much current reduction is enough?

A. Muetze et al.

IEEE INDUSTRY APPLICATIONS MAGAZINE (2006)

Add to Collection

Article Engineering, Electrical & Electronic

A passive EMI filter for eliminating both bearing current and ground leakage current from an inverter-driven motor

Hirofumi Akagi et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.