☆ 4.7 Article

Computationally Efficient Personalized EMG-Driven Musculoskeletal Model of Wrist Joint

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Adaptive Cooperative Control Strategy for a Wrist Exoskeleton Using Model-Based Joint Impedance Estimation

Yihui Zhao et al.

Summary: This article proposes an adaptive cooperative control strategy for a wrist exoskeleton based on a real-time joint impedance estimation approach. By interpreting the underlying transformation in the muscular and skeletal systems, the proposed approach estimates the motion intention and the joint impedance of a human subject simultaneously without additional calibration procedures. Results indicate the proposed method outperforms other training protocols and enhances the training effectiveness and the interaction safety.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2023)

Add to Collection

Article Engineering, Biomedical

Intramuscular EMG-Driven Musculoskeletal Modelling: Towards Implanted Muscle Interfacing in Spinal Cord Injury Patients

Moon Ki Jung et al.

Summary: This study compared the performance of surface EMG and intramuscular EMG in estimating the required joint torques for assistive devices. The results showed that there was a similar correlation between the experimental and predicted joint torques when using either surface or intramuscular EMG as input signals in both healthy individuals and SCI patients.

IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Biomedical

EMG-Informed Neuromusculoskeletal Models Accurately Predict Knee Loading Measured Using Instrumented Implants

Kieran J. Bennett et al.

Summary: This study used a musculoskeletal modelling framework to compare different methods for estimating knee joint loading, and found that using EMG-informed modelling allows for better estimation of knee joint loading.

IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Hybrid Particle Filter-Particle Swarm Optimization Algorithm and Application to Fuzzy Controlled Servo Systems

Claudiu Pozna et al.

Summary: This article presents a hybrid metaheuristic optimization algorithm that combines particle filter (PF) and particle swarm optimization (PSO) algorithms. The algorithm is applied to the optimal tuning of proportional-integral-fuzzy controllers for position control of integral-type servo systems, resulting in reduced energy consumption. A comparison with other metaheuristic algorithms is provided at the end of the article.

IEEE TRANSACTIONS ON FUZZY SYSTEMS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Toward Generalization of sEMG-Based Pattern Recognition: A Novel Feature Extraction for Gesture Recognition

Cheng Shen et al.

Summary: This study explores the generalization ability of gesture recognition via surface electromyography (sEMG) and proposes a new feature extraction method to reduce the influence of limb position on sEMG-based pattern recognition. The results show significant improvements in accuracy and generalization compared to traditional methods.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

Add to Collection

Article Robotics

Myoelectric or Force Control? A Comparative Study on a Soft Arm Exosuit

Nicola Lotti et al.

Summary: The present study compared the performance of two different controllers on a wearable robotic suit. The results showed that both controllers were robust and effective in detecting human-motor interaction and had comparable performance in augmenting muscular activity. However, the model-based myoelectric control outperformed the force control in promptness and assistance during high dynamic movements.

IEEE TRANSACTIONS ON ROBOTICS (2022)

Add to Collection

Article Computer Science, Information Systems

Reinforcement Learning-based control using Q-learning and gravitational search algorithm with experimental validation on a nonlinear servo system

Iuliu Alexandru Zamfirache et al.

Summary: This study presents a novel reinforcement learning control approach that combines a deep Q-learning algorithm and a gravitational search algorithm to achieve optimal control objectives. Through real-time experiments, the proposed approach is demonstrated to be superior to other competing methods.

INFORMATION SCIENCES (2022)

Add to Collection

Article Multidisciplinary Sciences

Is subject-specific musculoskeletal modelling worth the extra effort or is generic modelling worth the shortcut?

Riad Akhundov et al.

Summary: Most musculoskeletal modelling studies use generic models, but this study found that subject-specific models result in more physiologically plausible muscle fiber mechanics. These models showed differences in joint angles, torque matching, muscle activations, and fiber dynamics compared to generic models.

PLOS ONE (2022)

Add to Collection

Article Multidisciplinary Sciences

A direct collocation framework for optimal control simulation of pedaling using OpenSim

Sangsoo Park et al.

Summary: A direct collocation (DC) framework was developed for optimal control simulation of human pedaling within the OpenSim modeling environment. The framework successfully solved the optimal control pedaling problem and demonstrated good performance in terms of tracking and muscle tendon unit (MTU) excitation patterns. This framework can easily be applied to predictive simulations with other objective functions.

PLOS ONE (2022)

Add to Collection

Article Biophysics

Sensitivity analysis guided improvement of an electromyogram-driven lumped parameter musculoskeletal hand model

Robert Hinson et al.

Summary: Sensitivity analysis can identify key parameters for optimizing neuromusculoskeletal models, leading to more reliable parameter identification and informing novel optimization strategies for clinical applications.

JOURNAL OF BIOMECHANICS (2022)

Add to Collection

Article Biochemical Research Methods

An approximate stochastic optimal control framework to simulate nonlinear neuro-musculoskeletal models in the presence of noise

Tom Van Wouwe et al.

Summary: Model-based simulations have shown that both musculoskeletal dynamics and physiological noise are important factors in movement control. However, current computational tools limit deterministic simulations to focus on accurate modeling of the musculoskeletal system while neglecting physiological noise, while stochastic simulations simplify dynamics while accounting for noise. We present a novel simulation framework that combines the advantages of both deterministic and stochastic approaches, allowing for predictions of motor coordination and movement patterns in the presence of both musculoskeletal dynamics and physiological noise.

PLOS COMPUTATIONAL BIOLOGY (2022)

Add to Collection

Article Computer Science, Information Systems

Toward Robust, Adaptiveand Reliable Upper-Limb Motion Estimation Using Machine Learning and Deep Learning-A Survey in Myoelectric Control

Tianzhe Bao et al.

Summary: This article provides a systematic review of recent achievements in the field of multi-functional human-machine interfaces. By exploring the fusion of multi-modal sensors, transfer learning methods, and post-processing approaches, the aim is to enhance the robustness, adaptability, and reliability of the models. Additionally, research challenges and emerging opportunities in hardware development, public resources, and decoding strategies are analyzed to provide perspectives for future developments.

IEEE JOURNAL OF BIOMEDICAL AND HEALTH INFORMATICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Multimodal Estimation of Endpoint Force During Quasi-Dynamic and Dynamic Muscle Contractions Using Deep Learning

Gelareh Hajian et al.

Summary: This study proposes a novel approach for force/torque estimation using a deep multimodal convolutional neural network (CNN) with electromyogram-inertial measurement unit (EMG-IMU) data. The results show the robustness of the method and significant improvement in force estimation when incorporating kinematic information.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A New Deep Anomaly Detection-Based Method for User Authentication Using Multichannel Surface EMG Signals of Hand Gestures

Qingqing Li et al.

Summary: This article investigates the use of multichannel sEMG signals of hand gestures for user authentication. A new deep anomaly detection-based method is proposed, which employs sEMG images generated from multichannel sEMG signals. Among different sEMG image generation methods, the root mean square (rms) map achieves the best performance.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

Add to Collection

Article Engineering, Biomedical

Lower-Limb Joint Torque Prediction Using LSTM Neural Networks and Transfer Learning

Longbin Zhang et al.

Summary: Estimation of joint torque during movement is important in various settings. In this study, LSTM neural networks and transfer learning were used to accurately predict lower limb joint torques during daily activities. The models were trained using muscle electromyography signals and joint angles. The performance of the models was evaluated in different scenarios, and it was found that the LSTM models could accurately predict joint torques with relatively low error. The use of transfer learning further improved the generalizability of the models.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2022)

Add to Collection

Article Engineering, Biomedical

Generic scaled versus subject-specific models for the calculation of musculoskeletal loading in cerebral palsy gait: Effect of personalized musculoskeletal geometry outweighs the effect of personalized neural control

Hans Kainz et al.

Summary: This study compared musculoskeletal simulations using different models and found differences in joint kinetics and joint contact forces among different modelling frameworks. However, the impact of MRI-based models on joint contact forces was greater than including electromyography data. Overall, clinical reasoning based on musculoskeletal simulation results between healthy and pathological participants is unlikely to be affected by the choice of modelling.

CLINICAL BIOMECHANICS (2021)

Add to Collection

Article Automation & Control Systems

Prediction of Human Voluntary Torques Based on Collaborative Neuromusculoskeletal Modeling and Adaptive Learning

Weiqun Wang et al.

Summary: This article proposed a torque prediction method based on collaborative neuromusculoskeletal modeling and adaptive learning for sEMG-based human-robot interaction. By designing an sEMG-torque model considering various factors and using a collaborative optimization method, the method aimed to improve torque prediction accuracy. Additionally, an adaptive learning method based on Gaussian process regression was utilized to learn and predict estimation errors in real time.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Biophysics

The effectiveness of EMG-driven neuromusculoskeletal model calibration is task dependent

Azadeh Kian et al.

Summary: The study calibrated neuromusculoskeletal models of the shoulder using different strategies and found that calibrating models across all tasks produced the most accurate joint force predictions. Muscles generating greater torque were more sensitive to calibration. Extensive model calibration over a broad range of tasks is crucial for accurate and physiologically relevant musculotendon and EMG-to-activation parameters.

JOURNAL OF BIOMECHANICS (2021)

Add to Collection

Review Engineering, Biomedical

Myoelectric control of robotic lower limb prostheses: a review of electromyography interfaces, control paradigms, challenges and future directions

Aaron Fleming et al.

Summary: This paper reviews the use of EMG signals for controlling robotic lower limb prostheses, highlighting the potential for new functionalities and adaptation to various environments and tasks. It also addresses the challenges, knowledge gaps, and opportunities in this research field, emphasizing the importance of collaboration among researchers to improve motor function for individuals with lower limb amputations.

JOURNAL OF NEURAL ENGINEERING (2021)

Add to Collection

Proceedings Paper Automation & Control Systems

A Direct Collocation method for optimization of EMG-driven wrist muscle musculoskeletal model

Yihui Zhao et al.

Summary: The study proposes a direct collocation method to optimize subject-specific parameters in a wrist musculoskeletal model, which is used to estimate wrist flexion/extension motion. The optimized parameters show a similar performance compared to those optimized by genetic algorithm, with the direct collocation method requiring less optimization time.

2021 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA 2021) (2021)

Add to Collection

Proceedings Paper Engineering, Biomedical

Clusterization of multi-channel electromyograms into muscle-specific activations to drive a subject-specific musculoskeletal model: towards fast and accurate clinical decision-making

D. Simonetti et al.

Summary: Current clinical decision-making relies on rapid and subjective functional tests, while biomechanical laboratories utilize advanced technologies to quantitatively describe the biomechanical reasons behind gait disorders. This study aims to blend clinical rapidity and biomechanical accuracy through integrating multi-channel electromyography clustering and real-time neuro-musculoskeletal modeling techniques.

2021 43RD ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE & BIOLOGY SOCIETY (EMBC) (2021)

Add to Collection

Article Engineering, Biomedical

Myoelectric control and neuromusculoskeletal modeling: Complementary technologies for rehabilitation robotics

Jeffrey Berning et al.

Summary: This paper explores the potential of myoelectric control and neuromusculoskeletal modeling for robotic rehabilitation, with advancements in these fields offering opportunities for improving rehabilitation robot control strategies.

CURRENT OPINION IN BIOMEDICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A CNN-LSTM Hybrid Model for Wrist Kinematics Estimation Using Surface Electromyography

Tianzhe Bao et al.

Summary: A hybrid CNN-LSTM model is proposed in this article to fully explore the temporal-spatial information in sEMG, and experimental results demonstrate that CNN-LSTM significantly outperforms other methods, especially in complex wrist movements.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Article Engineering, Biomedical

Inter-Subject Domain Adaptation for CNN-Based Wrist Kinematics Estimation Using sEMG

Tianzhe Bao et al.

Summary: A novel regression scheme for supervised domain adaptation (SDA) was proposed to enhance inter-subject performances of CNN in wrist kinematics estimation by effectively reducing domain shift effects. The approach outperformed fine-tuning in both single-single and multiple-single scenarios of kinematics estimation, maintaining better performances in original domains and increasing model reusability among multiple subjects.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2021)

Add to Collection

Article Engineering, Biomedical

A Myoelectric Control Interface for Upper-Limb Robotic Rehabilitation Following Spinal Cord Injury

Craig G. McDonald et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2020)

Add to Collection

Article Engineering, Biomedical

Model-Based Control of Individual Finger Movements for Prosthetic Hand Function

Dimitra Blana et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2020)

Add to Collection

Article Biophysics

Machine learning methods to support personalized neuromusculoskeletal modelling

David J. Saxby et al.

BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Evolving Fuzzy Models for Prosthetic Hand Myoelectric-Based Control

Radu-Emil Precup et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Targeted Achilles Tendon Training and Rehabilitation Using Personalized and Real-Time Multiscale Models of the Neuromusculoskeletal System

Claudio Pizzolato et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient trajectory optimization for curved running using a 3D musculoskeletal model with implicit dynamics

Marlies Nitschke et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Biochemical Research Methods

OpenSim Moco: Musculoskeletal optimal control

Christopher L. Dembia et al.

PLOS COMPUTATIONAL BIOLOGY (2020)

Add to Collection

Article Engineering, Biomedical

An EMG-Driven Musculoskeletal Model for Estimating Continuous Wrist Motion

Yihui Zhao et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2020)

Add to Collection

Article Engineering, Biomedical

Electromyography-Driven Progressive Assist-as-Needed Control for Lower Limb Exoskeleton

Kai Gui et al.

IEEE TRANSACTIONS ON MEDICAL ROBOTICS AND BIONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Multimodal Sensor Medical Image Fusion Based on Local Difference in Non-Subsampled Domain

Weiwei Kong et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Add to Collection

Article Engineering, Electrical & Electronic

High-Density Large-Scale TMR Sensor Array for Magnetic Field Imaging

Chaofeng Ye et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Add to Collection

Article Engineering, Biomedical

Anthropometric Scaling of Anatomical Datasets for Subject-Specific Musculoskeletal Modelling of the Shoulder

Christian Klemt et al.

ANNALS OF BIOMEDICAL ENGINEERING (2019)

Add to Collection

Article Multidisciplinary Sciences

Musculoskeletal modelling of the human cervical spine for the investigation of injury mechanisms during axial impacts

Pavlos Silvestros et al.

PLOS ONE (2019)

Add to Collection

Article Engineering, Biomedical

Comparing EMG-Based Human-Machine Interfaces for Estimating Continuous, Coordinated Movements

Lizhi Pan et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2019)

Add to Collection

Article Biochemical Research Methods

OpenSim: Simulating musculoskeletal dynamics and neuromuscular control to study human and animal movement

Ajay Seth et al.

PLOS COMPUTATIONAL BIOLOGY (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

A Linear Approach to Optimize an EMG-Driven Neuromusculoskeletal Model for Movement Intention Detection in Myo-Control: A Case Study on Shoulder and Elbow Joints

Domenico Buongiorno et al.

FRONTIERS IN NEUROROBOTICS (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Real-time simulation of hand motion for prosthesis control

Dimitra Blana et al.

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Biomedical

EMG-Driven Optimal Estimation of Subject-SPECIFIC Hill Model Muscle-Tendon Parameters of the Knee Joint Actuators

Antoine Falisse et al.

IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2017)

Add to Collection

Article Automation & Control Systems

Adaptive Impedance Control for an Upper Limb Robotic Exoskeleton Using Biological Signals

Zhijun Li et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Add to Collection

Article Mathematical & Computational Biology

Optimal Control Based Stiffness Identification of an Ankle-Foot Orthosis Using a Predictive Walking Model

Manish Sreenivasa et al.

FRONTIERS IN COMPUTATIONAL NEUROSCIENCE (2017)

Add to Collection

Article Biophysics

Lumped-parameter electromyogram-driven musculoskeletal hand model: A potential platform for real-time prosthesis control

Dustin L. Crouch et al.

JOURNAL OF BIOMECHANICS (2016)

Add to Collection

Article Engineering, Biomedical

Direct Methods for Predicting Movement Biomechanics Based Upon Optimal Control Theory with Implementation in OpenSim

Sina Porsa et al.

ANNALS OF BIOMEDICAL ENGINEERING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model

Katherine R. Saul et al.

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2015)

Add to Collection

Article Biophysics

Flexing Computational Muscle: Modeling and Simulation of Musculotendon Dynamics

Matthew Millard et al.

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2013)

Add to Collection

Article Multidisciplinary Sciences

EMG-Driven Forward-Dynamic Estimation of Muscle Force and Joint Moment about Multiple Degrees of Freedom in the Human Lower Extremity

Massimo Sartori et al.

PLOS ONE (2012)

Add to Collection

Article Computer Science, Software Engineering

On the implementation of an interior-point filter line-search algorithm for large-scale nonlinear programming

A Wachter et al.

MATHEMATICAL PROGRAMMING (2006)

Add to Collection

Article Biophysics

Sensitivity of a Hill-based muscle model to perturbations in model parameters

Carol Y. Scovil et al.

JOURNAL OF BIOMECHANICS (2006)

Add to Collection

Article Engineering, Biomedical

Neuromusculoskeletal modeling: Estimation of muscle forces and joint moments and movements from measurements of neural command

TS Buchanan et al.

JOURNAL OF APPLIED BIOMECHANICS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.