4.8 Article

Design and Analysis of a Variable-Speed Constant-Amplitude Wind Generator for Stand-Alone DC Power Applications

Related references

Note: Only part of the references are listed.
Article Automation & Control Systems

Different Active Disturbance Rejection Controllers Based on the Same Order GPI Observer

Yuefei Zuo et al.

Summary: Ten different ADR controllers based on different order observers are presented in this article and compared with conventional ADR controllers based on ESO. A common expression is established for ease of comparison and a novel frequency-domain analysis method is introduced to study the dynamic performance of the closed-loop control system.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

A Novel Power-Angle Control Method of DFIG-DC System Based on Regulating Air Gap Flux Vector

Chao Wu et al.

Summary: This article introduces a novel power-angle control method for the Doubly Fed Induction Generator (DFIG) DC system, regulating the air gap flux vector to control output power directly. The experimental results validate the effectiveness of this control method.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Automation & Control Systems

Grid-Connected and Standalone Control for Dual-Stator Brushless Doubly Fed Induction Generator

Yu Zeng et al.

Summary: This article suggests an improved vector control scheme for the dual-stator brushless doubly fed induction generator during standalone operation, utilizing the power winding magnetizing current as the control object to reduce demagnetization effects and simplify the outer voltage loop design. The main goal is to enhance system transient performance through the design of an improved standalone controller. A prototype of the generator employing the proposed scheme is used for validation in this study.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Engineering, Multidisciplinary

Dual Converter Connecting Open-End Doubly Fed Induction Generator to a DC-Microgrid

Emerson L. Soares et al.

Summary: This article introduces a novel system for connecting a three-phase doubly fed induction generator to a dc-microgrid. Through simulations and experiments, it was demonstrated that the proposed system is effective in maintaining balanced currents and voltages as well as reducing torque oscillations.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2021)

Article Engineering, Electrical & Electronic

Vienna Rectifier-Fed Squirrel Cage Induction Generator Based Stand-Alone Wind Energy Conversion System

Aradhya Sambhu Satpathy et al.

Summary: Back-to-back voltage source converters are commonly used in stand-alone wind power generation applications to interface squirrel cage induction generators, allowing for maximum power point tracking. To reduce converter losses, this article proposes a Vienna rectifier as the machine-side converter with a fixed capacitor bank to provide excitation VAR for variable speed SCIG.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Multidisciplinary

Performance and Analysis of a New Brushless Synchronous Generator for DC Microgrid Application

Saptarshi Basak et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)

Article Engineering, Electrical & Electronic

Drift-Free Perturb and Observe MPPT Algorithm With Improved Performance for SEIG-Based Stand-Alone Wind Energy Generation System

Jyotismita Mishra et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Automation & Control Systems

Minimum-Loss Control Strategy for a Dual-VSI DFIG DC System

Gil D. Marques et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Article Automation & Control Systems

A Novel Dual-Rotor Bidirectional Flux-Modulation PM Generator for Stand-Alone DC Power Supply

Yunchong Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

DFIG Topologies for DC Networks: A Review on Control and Design Features

Gil D. Marques et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Analysis and Dynamic Control of a Dual-Stator BDFIG-DC System Supplying DC Grid With Minimized Torque Ripple Through Harmonic Current Injection

Yunlei Jiang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

Article Automation & Control Systems

Optimal-Third-Harmonic-Injection-Based Control for a Five-Phase Dual Stator-Winding Induction Generator DC Generating System

Feifei Bu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Engineering, Multidisciplinary

Inertia-Free Stand-Alone Microgrid-Part II: Inertia Control for Stabilizing DC-Link Capacitor Voltage of PMSG Wind Turbine System

Jaewoo Kim et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)

Article Automation & Control Systems

Control and Performance of Five-Phase Dual Stator-Winding Induction Generator DC Generating System

Haijun Xu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

A Control Strategy for Reliable Power Output From a Stand-alone WRIG With Battery-Supported DC Link

Venkata Rama Raju Rudraraju et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Distributed Power-Generation Systems and Protection

Frede Blaabjerg et al.

PROCEEDINGS OF THE IEEE (2017)

Article Energy & Fuels

Assessment and Enhancement of a Full-Scale PMSG-Based Wind Power Generator Performance Under Faults

Mohammadreza Fakhari Moghaddam Arani et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2016)

Article Automation & Control Systems

Analysis and Control of Complementary Magnetic-Geared Dual-Rotor Motor

Le Sun et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)

Article Automation & Control Systems

Field-Weakening Control for Efficiency Optimization in a DFIG Connected to a DC-Link

G. D. Marques et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)

Article Engineering, Multidisciplinary

Optimal Design of IPM Motors With Different Cooling Systems and Winding Configurations

Alireza Fatemi et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2016)

Article Energy & Fuels

Air-Gap Power-Based Sensorless Control in a DFIG Connected to a DC Link

G. D. Marques et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2015)

Article Engineering, Electrical & Electronic

Wide-Speed-Range-Operation Dual Stator-Winding Induction Generator DC Generating System for Wind Power Applications

Feifei Bu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Article Engineering, Electrical & Electronic

MPPT Battery Charger for Stand-Alone Wind Power System

Kuo-Yuan Lo et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2011)

Article Engineering, Multidisciplinary

A Novel Control Strategy for a Variable-Speed Wind Turbine With a Permanent-Magnet Synchronous Generator

Md. Enamul Haque et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2010)

Article Automation & Control Systems

DFIG-based power generation system with UPS function for variable-speed applications

Grzegorz Iwanski et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2008)

Article Engineering, Electrical & Electronic

State voltage and frequency controller for a stand alone wind power generating system

Bhim Singh et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2008)

Article Engineering, Multidisciplinary

A novel stand-alone induction generator system for AC and DC power applications

Tarek Ahmed et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2007)

Article Automation & Control Systems

Overview of control and grid synchronization for distributed power generation systems

Frede Blaabjerg et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2006)

Article Engineering, Electrical & Electronic

Analysis and comparison of a speed-dependant and a torque-dependant mechanical device for wide constant power speed range in AFPM starter/alternators

Luca Del Ferraro et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2006)

Article Energy & Fuels

A novel stand-alone dual stator-winding induction generator with static excitation regulation

D Wang et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2005)

Article Engineering, Multidisciplinary

A 4-kW 42-V induction-machine-based automotive power generation system with a diode bridge rectifier and a PWM inverter

M Naidu et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2003)

Article Engineering, Electrical & Electronic

A novel high-performance magnetic gear

K Atallah et al.

IEEE TRANSACTIONS ON MAGNETICS (2001)