☆ 4.2 Article

Effect of three MWCNTs-COOH (chiral, zigzag and armchair) on the mechanical properties and water absorption of cement-based composites

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Characterization & Testing

Structural Performance of CNT-Reinforced Cementitious Materials Considering the Effect of Chirality of Nanotubes

Foad Mohajeri Nav et al.

Summary: This study investigates the effects of different chirality carbon nanotubes (CNTs) on the engineering behavior of cement-based composites. The results show that composites modified by chiral CNTs demonstrate great structural enhancement, while armchair-modified composites lead to undesirable strength development.

JOURNAL OF TESTING AND EVALUATION (2022)

Add to Collection

Article Chemistry, Physical

Application of experimental and statistical methods in the study of rheology of MWCNT (25%)-TiO2 (75%)/SAE40 HNF to identify and use in the lubrication industry

Mohammad Hemmat Esfe et al.

Summary: The viscosity behavior of MWCNT-TiO2/SAE40 combined nanofluid was studied using experimental and statistical methods. The results showed that the viscosity of the nanofluid was influenced by the solid volume fraction, temperature, and shear rate. The response surface methodology was used to predict the experimental results and establish a mathematical relationship.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Chemistry, Physical

Enhanced microstructural characteristics of binary and ternary blended cements reinforced with graphene oxide

Karthik Chintalapudi et al.

Summary: The utilization of alternative binders such as high-volume fly ash and ternary blended silica fume in cement composites can effectively reduce global carbon emissions. This article discusses how the addition of nanomaterials like graphene oxide (GO) enhances the efficiency and early strength of these cement composites. The study reveals that GO promotes early strength and improves the microstructural properties of cement composites, making it a potential solution for sustainable construction.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2022)

Add to Collection

Article Chemistry, Physical

Experimental study on physical and mechanical properties and micro mechanism of carbon nanotubes cement-based composites

Guifeng Liu et al.

Summary: The effects of MWCNTs content, water cement ratio, and addition method on the mechanical properties and microstructure of cement-based composites were studied. It was found that the flexural and compressive strength of the composites first increased and then decreased with the increase of MWCNTs content. MWCNTs played a bridging and filling role in the matrix.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2022)

Add to Collection

Article Chemistry, Physical

Electromagnetic wave absorption properties of MWCNTs-COOH/cement composites with different shapes of chiral, armchair and zigzag

Mahsa Fakharpour et al.

Summary: In this study, the electromagnetic wave absorption performances and dielectric properties of multi-walled carbon nanotube (MWCNT) functionalized with carboxyl (-COOH) group/cement composites with different shapes were investigated. The influence of sample thickness and MWCNT shape on the electromagnetic wave reflection loss, insertion loss, and absorption in the frequency range of 8-12 GHz was studied. Experimental results showed that MWCNT/cement composites have higher absorption properties at frequencies below 10-10.5 GHz compared to control samples, with absorption behavior varying with sample thickness and MWCNT shape.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2021)

Add to Collection

Article Chemistry, Physical

Magnesium Oxychloride Cement Composites with MWCNT for the Construction Applications

Michal Lojka et al.

Summary: In this study, composite materials based on magnesium oxychloride cement (MOC) with multi-walled carbon nanotubes (MWCNTs) were prepared and characterized. The MWCNT-doped composites exhibited high compactness, increased mechanical resistance, stiffness, and water resistance, which are crucial for their application in the construction industry and future design and development of alternative building products.

MATERIALS (2021)

Add to Collection

Article Electrochemistry

Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution

Yuri A. Meyer et al.

Summary: The Cu content in Al-5Cu/xCu composites significantly affects both the mechanical and corrosion properties, with higher Cu content leading to lower compressive strength. The Al-5Cu/3Cu composite exhibits the highest corrosion resistance and mechanical-to-corrosion ratio.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Enhanced thermoelectric properties of cement-based composites by Cl2/HNO3 pretreatment of graphene

Zhaoyang Jia et al.

Summary: Cement-based composites with thermoelectric effect show potential in addressing urban heat island effect, snow and ice melting on winter roads, and energy conversion and harvesting. Pretreatment of reduced graphene oxide (RGO) with Cl-2 can enhance both the electrical conductivity and Seebeck coefficient of cement-based composites, leading to improved thermoelectric properties. The optimal performance is achieved with 5.0wt% Cl-2 pretreated RGO in cement-based composites.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon Nanotubes in Biomedicine

Viviana Negri et al.

TOPICS IN CURRENT CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of additions of multiwall carbon nanotubes (MWCNT, MWCNT-COOH and MWCNT-Thiazol) in mechanical compression properties of a cement-based material

Susana Arrechea et al.

MATERIALIA (2020)

Add to Collection

Article Engineering, Multidisciplinary

Influence of functionalized MWCNT on microstructure and mechanical properties of cement paste

Mohammad Ali Mousavi et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2019)

Add to Collection

Article Construction & Building Technology

Modeling the mechanical properties of cementitious materials containing CNTs

Mahyar Ramezani et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Durability of multi-walled carbon nanotube reinforced concrete

A. Carrico et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Distinct Alp/Sip composites affecting its densification and mechanical behavior

Rodrigo S. Bonatti et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Proceedings Paper Metallurgy & Metallurgical Engineering

Improving the mechanical performance of cement composites by carbon nanotubes addition

Syed Shujat-ul-Hussan Gillani et al.

XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017 (2017)

Add to Collection

Article Construction & Building Technology

Properties of carbon nanotube reinforced cement composite synthesized using different types of surfactants

B. S. Sindu et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Materials Science, Coatings & Films

Electroless NiP-MWCNT composite coating for textile industry application

A. Selvakumar et al.

SURFACE ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes

Yu Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

A Timoshenko beam model for vibration analysis of chiral single-walled carbon nanotubes

Lakhdar Boumia et al.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2014)

Add to Collection

Article Construction & Building Technology

On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites

Rashid K. Abu Al-Rub et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Mechanical and electrical properties of cross-linked carbon nanotubes

Seung I. Cha et al.

CARBON (2008)

Add to Collection

Review Chemistry, Physical

The role of surfactants in dispersion of carbon nanotubes

Linda Vaisman et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2006)

Add to Collection

Article Chemistry, Physical

Effects. of cell size and macrosegregation on the corrosion behavior of a dilute Pb-Sb alloy

Daniel M. Rosa et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Engineering, Mechanical

Functionalizing stereolithography resins: effects of dispersed multi-walled carbon nanotubes on physical properties

J. Hector Sandoval et al.

RAPID PROTOTYPING JOURNAL (2006)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of carbon nanotubes on mechanical and electrical properties of polyaniline fibers

V Mottaghitalab et al.

SYNTHETIC METALS (2005)

Add to Collection

Article Chemistry, Physical

Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes

GY Li et al.

CARBON (2005)

Add to Collection

Review Multidisciplinary Sciences

Electronic, thermal and mechanical properties of carbon nanotubes

MS Dresselhaus et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)

Add to Collection

Article Engineering, Chemical

Densification behaviour of mixtures of hard and soft powders under pressure

D Bouvard

POWDER TECHNOLOGY (2000)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling microstructural and mechanical properties of ferritic ductile cast iron

P Donelan

MATERIALS SCIENCE AND TECHNOLOGY (2000)

Add to Collection

Article Materials Science, Composites

Micromechanical behavior of short-fiber polymer composites

ML Mehan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.