☆ 4.7 Article

Three-dimensional ordered zeolite-templated carbon with covalent sulfur for efficient removal of elemental mercury: Experimental study and molecular dynamic simulation

FUEL PROCESSING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Coupling of sulfur and boron in carbonaceous material to strengthen persulfate activation for antibiotic degradation: Active sites, mechanism, and toxicity assessment

Feng Ye et al.

Summary: In this study, S, B co-doped carbon-based persulfate activators were synthesized for the first time, showing enhanced catalytic performance compared to solo S or B doping. The carbon material exhibited efficient degradation of organic pollutants under both acidic and basic conditions, which indicates its potential application in environmental remediation.

CHINESE CHEMICAL LETTERS (2023)

Add to Collection

Article Engineering, Environmental

Porous carbon with uniformly distributed cobalt nanoparticles derived from ZIF-67 for efficient removal of vapor elemental mercury: A combined experimental and DFT study

Jing Yang et al.

Summary: The novel N-doped porous carbon (NC) adsorbent with uniformly distributed Cobalt nanoparticles (Co/NC) showed high efficiency in vapor elemental mercury removal, with DFT calculations revealing the mechanism of mercury adsorption on Co/NC at various temperatures.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Experimental study on mercury removal from coal-fired flue gas by sulfur modified biomass coke with mechanochemical method

Shilin Zhao et al.

Summary: Coal-fired power plants are the main anthropogenic source of mercury emissions in the atmosphere. This study focuses on the preparation of mechanochemical sulfur-modified biomass coke and investigates the effects of sulfur addition types and amounts on mercury removal performance. The results show that different sulfur addition types have varying effects on the mercury removal efficiency, with increasing S2Cl2 addition leading to higher removal rates.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Removal of elementary mercury by solid sorbents at different temperatures: Variation of the desorption activation energy through thermal desorption analysis

Jing Yang et al.

Summary: The interaction of gaseous elemental mercury with solid sorbents is influenced by the adsorption temperature, which affects the desorption peak location. Desorption activation energy (E-d) on different sorbents evolves with adsorption temperature, indicating a transition from physisorption to chemisorption for mercury removal on montmorillonite (MMT). The study provides insights into the temperature effect on mercury adsorption mechanisms on different solid sorbents, which is important for optimizing operating temperatures for elemental mercury removal.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Performance and mechanism of CuS-modified MWCNTs on mercury removal: Experimental and density functional theory study

Haoyun Liu et al.

Summary: A functional composite adsorbent of CuS loaded on MWCNTs was synthesized for gaseous Hg-0 removal. CuS/MWCNTs showed excellent Hg-0 removal ability, with a maximum efficiency of 85.8% achieved at a 10% loading ratio and 70°C reaction temperature. Inhibitory roles of SO2, NO, and H2O were observed, while O-2 had a promoting effect on Hg-0 removal. The adsorption mechanism involved physical adsorption on MWCNTs and chemisorption on CuS surface, forming oxidized HgS.

FUEL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Sulfur/oxygen-doped porous carbons via NaCl-assisted thermolysis of a molecular precursor for CO2 capture

Ali Can Zaman et al.

Summary: A novel combination of cheap and easy to synthesize molecular precursor p-toluenesulfonic acid (TsOH) and pore former NaCl was utilized for the production of sulfur/oxygen doped carbons. The addition of NaCl increases the pore development of carbons, positively influencing CO2 capture performance, especially beyond 0.4-0.5 bar pressure.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Engineering, Environmental

Insights into shale gas adsorption and an improved method for characterizing adsorption isotherm from molecular perspectives

Xiaofei Hu et al.

Summary: Gas adsorption behavior in complex nanoporous media in shale plays a crucial role in evaluating the gas in place (GIP) and exploration. In this study, a multi-size interconnected pore model based on the veritable pore structure characterization is proposed. The grand canonical Monte Carlo (GCMC) simulations are used to investigate methane adsorption behavior in organic matter and inorganic clay minerals with multi-size pores. The results reveal the effects of diverse media surfaces and variable pore sizes on methane adsorption behavior and explore the complex adsorption behaviors in shale nanopores. Moreover, an improved method for calibrating the gas adsorption isotherms in shale is proposed considering multiple factors from a molecular perspective. The findings of this study enhance the understanding of gas adsorption mechanisms in complex nanoporous structures and provide a reliable approach to evaluate the GIP in shale.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Optimization process of porous carbon derived from coconut shell: A novel preparation condition and investigation on pore surface roughness

Liangcai Wang et al.

Summary: The objective of this study was to investigate the textural properties of porous carbon prepared under air conditions and establish the relationship between pore surface roughness and textural properties. The results showed that porous carbon obtained under air conditions exhibited a higher specific surface area compared to other conditions. The study also found that the pore structure of porous carbon underwent different stages with increasing final temperature or holding time. Furthermore, the correlation coefficients between pore surface roughness and mesopore volume, mesopore surface area, and macropore volume were determined.

DIAMOND AND RELATED MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Coal-based sulfur hybrid sorbent for removal of Hg0 from flue gas. Part 1. High inorganic sulfur coal

Qihuang Huo et al.

Summary: A novel sulfur hybrid mercury sorbent was successfully prepared by chemically activating high inorganic sulfur coal using potassium hydroxide, which showed excellent mercury removal performance at high temperatures, high specific surface area, and adsorption capacity, as well as good resistance to various gases.

FUEL (2022)

Add to Collection

Article Energy & Fuels

DFT combined with XPS to investigate sulfur removal and sulfur-fixation mechanisms of copper oxide during coal pyrolysis and semi-coke combustion

Chunjuan Zhang et al.

Summary: The study found that CuO has a strong sulfur-fixation effect on H2S but a weak ability to break down SO2. Enriched oxygen conditions can promote CuO to absorb and decompose SO2, as well as catalyze the decomposition of thiophene. Both experimental and theoretical results are consistent with each other in this study.

FUEL (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Removing ionic and organic mercury from light hydrocarbon liquids by ordered zeolite-templated carbon doped with sulphur

Jiaxin Wang et al.

Summary: This study synthesized sulphur-doped beta-zeolite-templated carbons to remove ionic and organic mercury from gasoline, and found that sulphur doping improved the stability and adsorption capacity of the materials. The adsorption mechanism of mercury on sulphur-doped carbons was revealed using the GCMC method and DFT study.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Chemistry, Applied

Enhancing inward and outward mass transport during chemical vapor deposition of pyrolytic carbon for better synthesis of ZTC

Ying Liu et al.

Summary: Reducing the particle size of the zeolite template enhances both inward and outward mass transport during zeolite-templated CVD, improving the structural properties of ZTC. Inward diffusion of the carbon precursor is enhanced in smaller zeolite particles, leading to more uniform deposition of pyrolytic carbon inside the zeolite.

MICROPOROUS AND MESOPOROUS MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Thiophene-functional hierarchical carbons for the removal of ionic and organic mercury in light hydrocarbon liquids: Synthesis, evaluation and adsorption mechanism

Jiaxin Wang et al.

Summary: This study proposes a simple method for synthesizing thiophene-functional zeolite-templated carbons to remove mercury from gasoline. The effects of template type and impregnation concentration on the quality of the templated carbon were investigated. The results show that thiophene-functional zeolite-templated carbons with proper impregnation concentration exhibit excellent adsorption capacity and regeneration ability.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Applied

High sulfur-doped hard carbon anode from polystyrene with enhanced capacity and stability for potassium-ion storage

Xiaoyan Chen et al.

Summary: In this study, sulfur-doped hard carbon material was synthesized as an anode material for potassium ion batteries. The material exhibited excellent cycling stability and rate performance, and the sulfur doping provided abundant active sites for potassium ion adsorption. This work provides a new approach for the design of carbonaceous anode materials with high capacity and long cycle life.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Engineering, Chemical

Removing mercury from flue gas by sulfur-doped zeolite-templated carbon: Synthesize and adsorption mechanism

Ying Liu et al.

Summary: This study developed zeolite-templated carbon materials with and without sulfur, and tested their mercury adsorption performance at different temperatures. The results showed that one sample exhibited the highest mercury removal efficiency, and its physical and chemical properties contributed to the mercury capture process.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

An overview of sulfur-functional groups in biochar from pyrolysis of biomass

Lijian Leng et al.

Summary: Biochar is a solid material obtained from the pyrolytic carbonization of biomass in an oxygen-free/limited environment. Sulfur-containing biochar has a wide range of applications, such as adsorptive removal of pollutants (e.g., Hg, Cd, and Ni) and acting as a solid acid catalyst or as an electrode of Li-S battery. To date, many methods have been developed to strengthen the function of biochar by introducing sulfur-containing groups to promote the application and commercialization of biochar.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Insight into the effect of SO2 on the Hg0 removal performance over a 1V-8Ce/AC sorbent at low temperatures

Youcai Zhu et al.

Summary: The experimental results revealed that SO2 has a dual effect on Hg removal, acting both as a promoter and an inhibitor. Under specific conditions, HCl was found to significantly promote Hg removal. The 1V-8Ce/AC sorbent exhibited good sulfur resistance and stability under high temperature and high SO2 concentration conditions.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Acceleration of the reaction of H2S and SO2 by non-thermal plasma to improve the mercury adsorption performance of activated carbon

Qingyu Ji et al.

Summary: This study proposes a cost-effective and efficient method using non-thermal plasma (NTP) to accelerate the reactions between H2S and SO2 on activated carbon (AC) to improve elemental mercury (Hg0) removal performance. The NTP treatment was found to significantly increase the reaction rate between H2S and SO2 on AC, leading to improved Hg0 removal efficiency.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

The interaction and mechanism between threonine-montmorillonite composite and Pb2+ or Cu2+: Experimental study and theory calculation

Hongling Zhang et al.

Summary: The study showed that the adsorption capacity of threonine-montmorillonite composite for Pb2+ and Cu2+ was higher than original sodium-montmorillonite. Molecular dynamics simulation and wavefunction program based on density functional theory were used to investigate the interaction mechanism, and Independent Gradient Model analysis was applied to decode the removal mechanism of Thr-Mt to Pb2+ and Cu2+.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Applied

3D macropore carbon-vacancy g-C3N4 constructed using polymethylmethacrylate spheres for enhanced photocatalytic H-2 evolution and CO2 reduction

Xuewen Wang et al.

Summary: The 3D macropore C-vacancy g-C3N4 prepared through a one-step route significantly improves H-2 production and CO2 reduction rates by enhancing light utilization efficiency and increasing the number of surface-active sites.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Energy & Fuels

Adsorption of elemental mercury in flue gas using biomass porous carbons modified by microwave/hydrogen peroxide

Ying Li et al.

Summary: A clean modification method combining microwave activation and H2O2 impregnation of bio-char was proposed in this study to enhance the mercury adsorption capacity, which effectively improved the Hg0 removal efficiency by improving the pore structure and functional groups of biomass porous carbons. Oxygen and nitric oxide play a significant role in the mercury removal process.

FUEL (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Separation of CH4, H2S, N2 and CO2 gases using four types of nanoporous graphene cluster model: a quantum chemical investigation

Mina Ghiasi et al.

Summary: By doping nitrogen atoms into porous graphene, the permeation barrier of gases can be reduced, leading to increased selectivity for gas molecules. Therefore, porous graphene sheets show potential as highly efficient and selective membranes for gas separations.

JOURNAL OF MOLECULAR MODELING (2021)

Add to Collection

Article Chemistry, Applied

Carbon deposition mechanism and structural changes for zeolite-templated carbons

Ying Liu et al.

Summary: The study investigated the impact of CVD time and temperature on the structure of pyrolytic carbon in ZCP synthesis, confirming that pyrolytic carbon is mainly connected by C-C and C--C bonds, while some graphitic carbon forms on the zeolite surface. The experimental results from TGA and mass spectrometer analysis provided valuable insights for designing and optimizing CVD processes for ZCP synthesis.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Influence of Different Sulfur Forms on Gas-Phase Mercury Removal by SO2-Impregnated Porous Carbons

Min She et al.

ENERGY & FUELS (2020)

Add to Collection

Article Engineering, Environmental

MIL-100(Fe) supported Mn-based catalyst and its behavior in Hg0 removal from flue gas

Xiao Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Carbon materials loaded with maghemite as regenerable sorbents for gaseous Hg0 removal

Cristina Antuna-Nieto et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Promotional effect of NH3 on mercury removal over biochar thorough chlorine functional group transformation

Huicong Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Chemistry, Applied

Scalable synthesis of zeolite-templated ordered microporous carbons without external carbon deposition for capacitive energy storage

Han Chang Kwon et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Review Energy & Fuels

Chemistry of Trace Inorganic Elements in Coal Combustion Systems: A Century of Discovery

Constance Senior et al.

ENERGY & FUELS (2020)

Add to Collection

Article Energy & Fuels

Ionic mercury captured by H2S sulfurized biochar in liquid hydrocarbons: Mechanism and stability evaluation

Jiaxin Wang et al.

FUEL (2020)

Add to Collection

Article Engineering, Environmental

Noble metal-based sorbents: A way to avoid new waste after mercury removal

Cristina Antuna-Nieto et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of pore morphology and surface roughness on wettability of porous titania films

Bangyun Xiong et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Geochemistry & Geophysics

Assessment of Graphitized Coal Ash Char Concentrates as a Potential Synthetic Graphite Source

Charlotte Badenhorst et al.

MINERALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the oxygen functional groups of activated carbon on its electrochemical performance for supercapacitors

Xi-ran Li et al.

NEW CARBON MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Chemisorption and kinetic mechanisms of elemental mercury on immobilized V2O5/TiO2 at low temperatures

Hua-zhen Shen et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Study on removal of elemental mercury over MoO3-CeO2/cylindrical activated coke in the presence of SO2 by Hg-temperature-programmed desorption

Miao Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Thermodynamics

Techno-economic analysis on a new conceptual design of waste heat recovery for boiler exhaust flue gas of coal-fired power plants

Yunli Jin et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Engineering, Environmental

Bio-oxidation of Elemental Mercury into Mercury Sulfide and Humic Acid-Bound Mercury by Sulfate Reduction for Hg0 Removal in Flue Gas

Zhenshan Huang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

Enhanced mercury removal by transplanting sulfur-containing functional groups to biochar through plasma

Huicong Zhang et al.

FUEL (2019)

Add to Collection

Article Chemistry, Physical

Unique thermal contraction of zeolite-templated carbons enabling micropore size tailoring and its effects on methane storage

Seokin Choi et al.

CARBON (2019)

Add to Collection

Article Chemistry, Physical

Micromachined nanocrystalline graphite membranes for gas separation

S. J. Fishlock et al.

CARBON (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Zeolite-templated carbons - three-dimensional microporous graphene frameworks

H. Nishihara et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Engineering, Environmental

Effect of flue gas component and ash composition on elemental mercury oxidation/adsorption by NH4Br modified fly ash

Qiang Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Energy & Fuels

Removal of elemental mercury from simulated flue gas by a novel composite sulfurized activated carbon

Lei Qiu et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Environmental influence and countermeasures for high humidity flue gas discharging from power plants

Ma Shuangchen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Engineering, Environmental

Highly effective direct decomposition of H2S into H2 and S by microwave catalysis over CoS-MoS2/γ-Al2O3 microwave catalysts

Wentao Xu et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Agricultural Engineering

A feasible process for furfural production from the pre-hydrolysis liquor of corncob via biochar catalysts in a new biphasic system

Aojie Deng et al.

BIORESOURCE TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Amorphous, turbostratic and crystalline carbon membranes with hydrogen selectivity

A. Wollbrink et al.

CARBON (2016)

Add to Collection

Article Energy & Fuels

Macropore-Stabilized Limestone Sorbents Prepared by the Simultaneous Hydration-Impregnation Method for High-Temperature CO2 Capture

Yongqing Xu et al.

ENERGY & FUELS (2016)

Add to Collection

Article Engineering, Environmental

Recyclable Naturally Derived Magnetic Pyrrhotite for Elemental Mercury Recovery from Flue Gas

Yong Liao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Engineering, Environmental

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas

Hailong Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Engineering, Environmental

Using the Novel Method of Nonthermal Plasma To Add CI Active Sites on Activated Carbon for Removal of Mercury from Flue Gas

Bi Zhang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Engineering, Environmental

Effects of flue gas components on removal of elemental mercury over Ce-Mnox/Ti-PILCs

Chuan He et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Facile synthesis of monodisperse hollow carbon nanospheres using sucrose by carbonization route

Raji Atchudan et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Tuning selectivity of electrochemical reactions by atomically dispersed platinum catalyst

Chang Hyuck Choi et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Engineering, Environmental

Large-scale synthesis of high-quality zeolite-templated carbons without depositing external carbon layers

Seokin Choi et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Energy & Fuels

Removal of Gaseous Elemental Mercury by Cylindrical Activated Coke Loaded with CoOx-CeO2 from Simulated Coal Combustion Flue Gas

Huiyu Wu et al.

ENERGY & FUELS (2015)

Add to Collection

Article Energy & Fuels

Mercury chemistry of brominated activated carbons - Packed-bed breakthrough experiments

Erik C. Rupp et al.

FUEL (2014)

Add to Collection

Article Energy & Fuels

Design of sulfur treated activated carbon fibers for gas phase elemental mercury removal

Yaxuan Yao et al.

FUEL (2014)

Add to Collection

Article Chemistry, Physical

Formation of crosslinked-fullerene-like framework as negative replica of zeolite Y

Khanin Nueangnoraj et al.

CARBON (2013)

Add to Collection

Article Materials Science, Paper & Wood

TEMPO-oxidized cellulose nanofiber films: effect of surface morphology on water resistance

Galina Rodionova et al.

CELLULOSE (2012)

Add to Collection

Article Engineering, Environmental

Activated coke impregnated with cerium chloride used for elemental mercury removal from simulated flue gas

Shasha Tao et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Add to Collection

Article Energy & Fuels

Hg0 Removal from Simulated Flue Gas over CeO2/HZSM-5

Xiaopeng Fan et al.

ENERGY & FUELS (2012)

Add to Collection

Article Energy & Fuels

Removal of Gas-Phase Element Mercury by Activated Carbon Fiber Impregnated with CeO2

Xiaopeng Fan et al.

ENERGY & FUELS (2010)

Add to Collection

Article Environmental Sciences

Effects of biochar and greenwaste compost amendments on mobility, bioavailability and toxicity of inorganic and organic contaminants in a multi-element polluted soil

Luke Beesley et al.

ENVIRONMENTAL POLLUTION (2010)

Add to Collection

Article Electrochemistry

Influence of Sulfur on the Pyrolysis of CoTMPP as Electrocatalyst for the Oxygen Reduction Reaction

I. Herrmann et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorption-Enhanced Hydrolysis of β-1,4-Glucan on Graphene-Based Amorphous Carbon Bearing SO3H, COOH, and OH Groups

Masaaki Kitano et al.

LANGMUIR (2009)

Add to Collection

Article Engineering, Environmental

Impact of Fly Ash Composition on Mercury Speciation in Simulated Flue Gas

Ravi Bhardwaj et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2009)

Add to Collection

Article Energy & Fuels

Direct characterization of kerogen by x-ray and solid-state 13C nuclear magnetic resonance methods

S. R. Kelemen et al.

ENERGY & FUELS (2007)

Add to Collection

Article Energy & Fuels

Factors impacting gaseous mercury speciation in postcombustion

Jinsong Zhou et al.

ENERGY & FUELS (2007)

Add to Collection

Review Engineering, Environmental

Low-cost adsorbents for heavy metals uptake from contaminated water: a review

S Babel et al.

JOURNAL OF HAZARDOUS MATERIALS (2003)

Add to Collection

Article Engineering, Environmental

Mercury adsorption properties of sulfur-impregnated adsorbents

HC Hsi et al.

JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE (2002)

Add to Collection

Article Engineering, Chemical

Sulfonated polybenzimidazole membranes -: preparation and physico-chemical characterization

P Staiti et al.

JOURNAL OF MEMBRANE SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.