☆ 4.7 Review

Mechanism, performance and modification methods for NH3-SCR catalysts: A review

FUEL (2023)

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Vanadium catalyst based on a tungsten trioxide structure modified with antimony in NH3-selective catalytic reduction for improved low-temperature activity

JungHun Shin et al.

Summary: The addition of Sb5+ to the WO3 structure improves NH3 adsorption and SCR performance, as well as enhances oxygen mobility at low temperatures. This catalyst has important potential applications in NH3-selective catalytic reduction of NO.

APPLIED SURFACE SCIENCE (2022)

Add to Collection
Article Chemistry, Physical

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

Shoute Zhang et al.

Summary: Cu-exchanged zeolites synthesized via the solid-state ion-exchange (SSIE) route exhibited excellent NH3-SCR activities and higher Cu ion-exchange levels compared to traditional methods. NH4-form substrates promoted Cu2+ ion mobility and facilitated Cu2+ occupying exchange sites, beneficial for SCR reactions. Reaction intermediates like NH4+, -NH2, and NO2- were observed on catalysts prepared from NH4-form substrates.

APPLIED SURFACE SCIENCE (2022)

Add to Collection
Article Engineering, Environmental

NH3-SCR performance and SO2 resistance comparison of CeO2 based catalysts with Fe/Mo additive surface decoration

Lin Zhu et al.

Summary: Surface modifications of CeO2 with Fe2O3 and/or MoO3 can adjust SCR catalytic performance and SO2 resistance. Fe2O3 slightly improves low temperature SCR activity, while MoO3 significantly enhances NOx conversion. Different deactivation behaviors are observed at 250 degrees C for the four catalysts.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Review Engineering, Environmental

Spinel structured MFe2O4 (M = Fe, Co, Ni, Mn, Zn) and their composites for microwave absorption: A review

XiuBo Xie et al.

Summary: This article reviews the recent progress of spinel structured MFe2O4, including synthesis methods, microstructures, and the effects of different components on morphology and microwave absorption performances. The mechanisms of these systems, current challenges, and possible perspectives are also summarized in the article.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Applied

Novel Mn-Ce bi-oxides loaded on 3D monolithic nickel foam for low-temperature NH3-SCR de-NOx: Preparation optimization and reaction mechanism

Shuquan Ni et al.

Summary: This study synthesized Mn-Ce bi-oxides catalysts using the superior citrate method for the selective catalytic reduction of NO by NH3. The presence of surface-active oxygen and oxidized Mn4+ species promotes Fast-SCR reactions, while unsaturated Ni atoms and Ce3+ species improve the redox performance. The coexistence mechanisms of Fast-SCR reactions and E-R pathways were observed, possibly due to the presence of Bronsted sites at low temperature.

JOURNAL OF RARE EARTHS (2022)

Add to Collection
Article Environmental Sciences

Optimizing the distribution and proportion of various active sites for better NH3-SCR property over Cu/SSZ-13

Ziqian Liu et al.

Summary: The study investigated the effect of Cu/Al ratio on the performance and active center of Cu/SSZ-13 catalyst for SCR, finding that samples with low Cu/Al ratio have fewer active sites leading to low catalytic activity, while samples with high Cu/Al ratio perform well at low temperatures but generate CuO at high temperatures, decreasing catalytic performance.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection
Article Energy & Fuels

Investigation of Mn doped perovskite La-Mn oxides for NH3-SCR activity and SO2/H2O resistance

Aidong Fan et al.

Summary: A series of Mn-doped perovskite La-Mn oxides were prepared and evaluated for NH3-SCR activity, showing excellent performance in low-temperature SCR and resistance to SO2 and H2O. Mn doping altered the redox properties of La-Mn oxides, but the presence of SO2 and H2O weakened the redox properties and acidity of the catalyst. Mn doping enhanced NH3 adsorption and accelerated the decomposition of ammonium sulfate, improving SO2 resistance.

FUEL (2022)

Add to Collection
Article Energy & Fuels

TiO2-carbon nanotubes composite supported MnOx-CuO catalyst for low-temperature NH3-SCR of NO: Investigation of SO2 and H2O tolerance

S. Raja et al.

Summary: The addition of Cu and/or CNTs to the catalyst was found to be beneficial for improving its activity; a catalyst with 5% Cu loading exhibited the best performance; the addition of CNTs increased the specific surface area of the catalyst; Cu loading enhanced Mn4+ species and chemisorbed oxygen species on the catalyst surface.

FUEL (2022)

Add to Collection
Article Chemistry, Multidisciplinary

The role of Si coordination structures in the catalytic properties and durability of Cu-SAPO-34 as NH3-SCR catalyst for NOx reduction

Zhen Chen et al.

Summary: Si coordination structures have a significant influence on the catalytic properties and hydrothermal stability of CuSAPO-34 catalyst in NH3-SCR reaction. Cu/34-2 with Si(xOAl) (x = 1 to 3) structures exhibits remarkable durability and high NO reduction efficiency, while Cu/34-1 and Cu/34-4 with Si(4OAl) and Si(0OAl) structures, respectively, are significantly deactivated after hydrothermal treatment.

CHINESE CHEMICAL LETTERS (2022)

Add to Collection
Article Engineering, Environmental

NOx emission reduction in ammonia-powered micro-combustors by partially inserting porous medium under fuel-rich condition

Siliang Ni et al.

Summary: This study investigates the NOx emission performance in fuel-rich combustion of ammonia using micro combustors with double-rib structure partially inserted with porous medium. The results show that the porous medium can effectively reduce NO generation and emission under a larger inlet velocity. Increasing the thermal conductivity of the porous material can greatly decrease the emission of NO, but increase the emission of N2O. Additionally, increasing the porosity of the porous material leads to an increase in NO emission but a decrease in N2O emission.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Thermodynamics

Novel non-noble metal catalyst with high efficiency and synergetic photocatalytic hydrolysis of ammonia borane and mechanism investigation

Ruiming Fang et al.

Summary: In this study, a highly active non-noble metal CuNi/CNS catalyst was successfully prepared for the hydrolysis of ammonia borane to generate hydrogen. The results showed that CuNi alloy nanoparticles loaded on g-C3N4 nanosheets significantly enhanced the photocatalytic activity of the catalyst, and the catalyst demonstrated excellent reusability. Photoelectrochemical characterizations and theoretical simulations revealed the modulation of the electronic structure of g-C3N4 nanosheets by the transition metal nanoparticles, leading to improved photocatalytic performance of the catalyst.

ENERGY (2022)

Add to Collection
Article Energy & Fuels

Study on combustion characteristic of premixed H2/C3H8/air and working performance in the micro combustor with block

Qingguo Peng et al.

Summary: The combustion characteristics and thermal performance of premixed H-2/C3H8/air in a micro planar combustor with a block insert were experimentally and numerically tested. The effects of hydrogen blended fraction, equivalence ratio, flow rate, and block width on flame stability and heat transfer were discussed and analyzed. The results showed that adding hydrogen improved combustion stability in the micro combustor, and the lowest hydrogen blending mole fraction for a steady flame of the premixed H-2/C3H8/air was obtained through experimental study.

FUEL (2022)

Add to Collection
Review Chemistry, Applied

The effects of Mn-based catalysts on the selective catalytic reduction of NOx with NH3 at low temperature: A review

Zhiqing Zhang et al.

Summary: This paper reviews the progress of Mn-based catalysts for low-temperature selective catalytic reduction of NOx. The effects of various factors on catalytic activity, preparation strategies, catalytic performance, and resistance of Mn-based catalysts were systematically reviewed. The mechanisms of deactivation of Mn-based catalysts were also studied.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection
Article Engineering, Environmental

Reinvestigation of the oxidation of organic contaminants by Fe(VI): Kinetics and effects of water matrix constituents

Shuchang Wang et al.

Summary: This study systematically evaluated the reactivity of Fe(VI) towards TrOCs and found that Fe(VI) exhibited superior reactivity towards phenolic compounds. The coexisting water matrix constituents not only affected the reactivity of different ferrate species, but also altered the concentrations of ferrates.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection
Article Engineering, Environmental

Hollow multi-shelled Co3O4 as nanoreactors to activate peroxymonosulfate for highly effective degradation of Carbamazepine: A novel strategy to reduce nano-catalyst agglomeration

Qipu Ma et al.

Summary: The reduction of catalyst agglomeration is crucial for the advanced oxidation processes (AOPs) in wastewater treatment. In this study, Co3O4 hollow multi-shelled structures (HoMSs) were prepared as nanoreactors to reduce catalyst agglomeration. The triple-shelled HoMSs exhibited the best catalytic performance and complete degradation of carbamazepine was achieved within 30 minutes. The hollow structures played a significant role in reducing catalyst agglomeration, enhancing stability, and increasing the contact between reactants and active sites.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection
Article Engineering, Environmental

Promotion effect of Ni doping on the oxygen resistance property of Fe/CeO2 catalyst for CO-SCR reaction: Activity test and mechanism investigation

Shuhao Li et al.

Summary: In this study, catalysts based on Fe/CeO2 and Ni-doped Fe/CeO2 were prepared and their performance in CO-SCR reaction in the presence of oxygen was investigated. The results showed that the Ni-doped catalyst exhibited improved oxygen resistance and catalytic activity.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection
Article Engineering, Environmental

Phosphate on ceria with controlled active sites distribution for wide temperature NH3-SCR

Liang Chen et al.

Summary: The article introduces a ceria-based catalyst modified with phosphate for NH3-SCR, which exhibits excellent performance at a super-wide temperature window. The protective effect of NH3 and the capturing ability of phosphate on NH3 are discussed, leading to improved activity and selectivity. In addition, phosphate also reduces the adsorption of SO2, enhancing the catalyst's resistance to poisoning.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Enhancing and assessing ammonia-air combustion performance by blending with dimethyl ether

Tao Cai et al.

Summary: This study investigates the impact of blending NH3 with DME on the laminar burning velocity of NH3/air flames, finding that the addition of DME significantly enhances the burning velocity of NH3 flames. This enhancement is primarily due to the combined thermal and chemical effects. Furthermore, in binary flames, the relative importance of termination and branching reactions increases with more DME blended.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection
Review Chemistry, Applied

The development of diesel oxidation catalysts and the effect of sulfur dioxide on catalysts of metal-based diesel oxidation catalysts: A review

Zhiqing Zhang et al.

Summary: This paper discusses the importance of diesel oxidation catalyst (DOC) in diesel engine emission control and the development and measures against sulfur dioxide (SO2) pollution. By analyzing the composition, preparation methods, development trends, and impact of SO2 on DOC, future design methods for anti-SO2 DOC are prospected.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection
Review Engineering, Environmental

Mercury removal using various modified V/Ti-based SCR catalysts: A review

Jiancheng Yang et al.

Summary: This article reviews many modification experiments on V/Ti catalysts, including studies on the performance and mercury removal mechanisms of these catalysts, aiming to guide future improvements.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection
Article Thermodynamics

Effects of CO addition and multi-factors optimization on hydrogen/air combustion characteristics and thermal performance based on grey relational analysis

Bo Xie et al.

Summary: This study investigates the factors influencing the thermal performance of a micro-thermophotovoltaic generator, such as flame instability, heat loss, and residence time. The addition of CO in H-2/air premixed combustion is found to improve the relocation and stretch of the flame, enhancing the thermal performance of the generator. The design and structure of the combustor also play a significant role in altering flame anchoring and heat transmission, leading to higher radiation power. The results suggest that CO proportion and step height are crucial in achieving optimal radiation power and efficiency. The study identifies the optimal design parameters that result in the highest system efficiency and electrical power for the micro-thermophotovoltaic generator.

ENERGY (2022)

Add to Collection
Article Energy & Fuels

Experimental and numerical investigation on premixed H2/C3H8/air combustion and thermal performance in a burner with partially filled porous media br

Qingguo Peng et al.

Summary: This study investigates the effects of premixed combustion and porous media setting on the flame stability and energy efficiency in micro combustion. Partially inserted porous media and larger combustor size promote combustion stability and broaden burning limits, while blending C3H8 inhibits these effects.

FUEL (2022)

Add to Collection
Article Energy & Fuels

Investigation on the H2 fueled combustion with CH4 and C3H8 blending in a micro tube with/without fins

Jia Wei et al.

Summary: This study investigates the combustion characteristics and working performance of blending hydrocarbon fuels in a micro combustor. The results demonstrate that adding CH4 improves the combustion efficiency, while adding C3H8 increases the wall temperature. CH4 blending with H2 and air achieves higher thermal performance compared to C3H8 blending. Inserting fins optimizes the fluid field and enhances the radiation temperature.

FUEL (2022)

Add to Collection
Review Chemistry, Applied

Soot formation mechanism of modern automobile engines and methods of reducing soot emissions: A review

E. Jiaqiang et al.

Summary: Soot particles emitted by automobile engines have had a significant negative impact on the environment and human health. Understanding the complex process of soot formation and researching methods to reduce soot emission can help control pollution and contribute to advanced technology.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection
Review Chemistry, Applied

Influence of support composition on enhancing the performance of Ce-V on TiO2 comprised tungsten-silica for NH3-SCR

Dong Wook Kwon et al.

Summary: The roles of WO3 and SiO2 as supported on TiO2 in Ce-V catalysts were systematically investigated for NH3-SCR and NH3-oxidation at high temperatures. The addition of SiO2 and WO3 to TiO2 resulted in increased surface area, reduced nanoparticle size, and enhanced catalytic defects and oxygen species on Ce-V/TWS surface. Increasing (V4+ + V3+) fraction improved catalytic activity, with WO3 and SiO2 promoting redox properties and making Ce-V/TWS the most suitable catalyst for N-2 production via NH3 direct oxidation at high temperatures.

CATALYSIS TODAY (2021)

Add to Collection
Article Chemistry, Applied

Enhancement of low-temperature NH3-SCR catalytic activity and H2O & SO2 resistance over commercial V2O5-MoO3/TiO2 catalyst by high shear-induced doping of expanded graphite

Rui Wu et al.

Summary: The study found that doping of EG by high shear method could enhance the performance of SCR reaction, improving the resistance to H2O and SO2, with maintaining about 90% NO conversion rate. This was achieved by ensuring uniform distribution of TiO2 particles with EG and increasing surface area, Bronsted and Lewis acid sites, as well as VO2+ and adsorbed oxygen species on the surface.

CATALYSIS TODAY (2021)

Add to Collection
Article Chemistry, Applied

Improved catalytic performance and resistance to SO2 over V2O5-WO3/TiO2 catalyst physically mixed with Fe2O3 for low-temperature NH3-SCR

Tae Hun Kang et al.

Summary: The study examined the performance of V2O5-WO3/TiO2 and Fe2O3 physically mixed catalysts in SCR reactions, revealing that the addition of Fe2O3 can enhance the stability and SO2 resistance of the catalyst. Fe2O3 suppresses the formation of ammonium sulfate species, increases Brønsted acid sites, and improves NOx conversion.

CATALYSIS TODAY (2021)

Add to Collection
Article Chemistry, Applied

In situ/operando spectroscopic studies on NH3-SCR reactions catalyzed by a phosphorus-modified Cu-CHA zeolite

Hiroe Kubota et al.

Summary: The study investigates the reaction mechanism of NH3-SCR catalyzed by a phosphorus-modified CHA zeolite with active Cu species, revealing that the process involves reduction and reoxidation of Cu species. The phosphorus modification is found to enhance the hydrothermal durability of the catalyst, preserving more redox-active Cu species and the zeolite framework.

CATALYSIS TODAY (2021)

Add to Collection
Article Engineering, Environmental

Adjustment of operation temperature window of Mn-Ce oxide catalyst for the selective catalytic reduction of NOx with NH3

Yang Geng et al.

Summary: The introduction of tungsten as a promoter enhanced the catalytic activity of Mn-Ce oxide catalyst for NH3-SCR, increasing the NOx conversion above 150 degrees C while decreasing N2O production. Doped tungsten inhibited charge imbalance and reducibility, leading to higher NOx conversion above 150 degrees C over Mn3CeW0.3Ox compared to Mn3CeOx. Kinetic study showed that nu(SCR) over Mn(3)CeW(0.3)O(x) was higher than over Mn3CeOx, consistent with the SCR activity.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Chemistry, Applied

A comparative study of hydrothermal aging effect on cerium and lanthanum doped Cu/SSZ-13 catalysts for NH3-SCR

Di Deng et al.

Summary: Introduction of Ce and La can maintain the SCR activity of Cu/SSZ-13, but may reduce activity at lower temperatures. Ce doping improves the catalyst's hydrothermal stability, while La doping can lead to structural damage and decreased stability of the catalyst.

JOURNAL OF RARE EARTHS (2021)

Add to Collection
Article Chemistry, Physical

Regeneration of sulfur-poisoned Cu-SSZ-13 catalysts: Copper speciation and catalytic performance evaluation

Vitaly Mesilov et al.

Summary: Regeneration of sulfur-poisoned Cu-SSZ-13 catalyst via temperature ramp in an inert atmosphere followed by holding under oxidizing conditions at 500 degrees C restores significant activity for NOx conversion under different SCR conditions. Analysis of copper speciation shows different behavior of sulfur-free Cu species in fresh and regenerated catalysts, contributing to the development of regeneration strategies for Cu-SSZ-13 catalysts.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection
Article Chemistry, Physical

Promoting effect of Ti addition on three-dimensionally ordered macroporous Mn-Ce catalysts for NH3-SCR reaction: Enhanced N2 selectivity and remarkable water resistance

Xiaofeng Wang et al.

Summary: 3DOM-Mn3Ce1 and 3DOM-Mn3Ce1Ti1 catalysts exhibit high SCR activity and N-2 selectivity at low temperature, along with remarkable tolerance to H2O. Addition of Ti to the catalyst enhances N-2 selectivity and broadens the temperature window.

APPLIED SURFACE SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

A hollow structure WO3@CeO2 catalyst for NH3-SCR of NOx

Xiaoping Chen et al.

Summary: The development of a novel WO3@CeO2 catalyst with hollow structure using carbon sphere as hard template for NH3-SCR of NOx reaction has shown higher catalytic performance and tolerance due to its high specific surface area, reducible W species, increased specific amount of chemisorbed oxygen species, and acid sites.

CATALYSIS COMMUNICATIONS (2021)

Add to Collection
Article Engineering, Environmental

Enhancement of Ce doped La-Mn oxides for the selective catalytic reduction of NOx with NH3 and SO2 and/or H2O resistance

Xueke Shi et al.

Summary: Cerium modified La-Mn oxides show high NOx conversion rates and N2 selectivity in NH3-SCR reaction, with good resistance to SO2 and H2O. Ce doping optimizes the structure of La-Mn oxides, allowing them to maintain their perovskite structure while some CeOx and Mn3O4 leak out.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Review Environmental Sciences

A review: Application of tourmaline in environmental fields

Yafeng Liang et al.

Summary: Tourmaline, with its excellent physical and chemical properties, is widely used to alleviate environmental pollution by removing heavy metals and organic pollutants in aqueous solutions and soil. This review also discusses the factors affecting the removal of pollutants by tourmaline and its environmental risks through toxicity indexes.

CHEMOSPHERE (2021)

Add to Collection
Article Engineering, Environmental

Direct catalytic decomposition of N2O over bismuth modified NiO catalysts

Ming-xin Xu et al.

Summary: This study found that bismuth species is the optimal promoter, significantly improving the decomposition activity of NiO catalysts for N2O, and increasing steam resistance capability. Doping Bi species also helps to increase the specific surface area and oxygen adsorption/desorption capacity of the catalyst, promoting N2O decomposition performance. However, excess Bi species may decrease the surface area of NiO catalysts and cover active sites.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Energy & Fuels

Recent progress of metal-exchanged zeolites for selective catalytic reduction of NOx with NH3 in diesel exhaust

Xiaofeng Wang et al.

Summary: This review summarizes the development of zeolite catalysts in the SCR reaction, including Cu, Fe, Mn and other metal-exchanged zeolites. The study discusses the active sites of different metal-exchanged zeolites in NH3-SCR reaction, emphasizes the role of second metals and metal oxides, and effects of preparation methods and topologies. Challenges and further perspectives of metal-exchanged zeolites in NH3-SCR reaction are proposed to enhance the efficiency of NOx removal.

FUEL (2021)

Add to Collection
Article Chemistry, Physical

Two steps synthesis of CeTiOx oxides nanotube catalyst: Enhanced activity, resistance of SO2 and H2O for low temperature NH3-SCR of NOx

Zhiping Zhang et al.

Summary: CeTiOx-T with nanotube structure exhibits excellent catalytic activity, SO2 and H2O tolerance, and stability in NH3-SCR reaction. The strong interaction between Ce and Ti leads to short-range ordered Ce-O-Ti species, resulting in a larger BET surface area and higher NH3-SCR performance than traditional catalysts. In situ DRIFTS results suggest different reaction mechanisms at low and high temperatures over CeTiOx-T.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection
Article Chemistry, Physical

Effect of Tourmaline Addition on the Catalytic Performance and SO2 Resistance of NixMn3-xO4 Catalyst for NH3-SCR Reaction at Low Temperature

Liyin Wang et al.

Summary: The NixMn3-xO4 and NixMn3-xO4/T (tourmaline) catalysts with a double-layer hollow structure were prepared for low-temperature selective catalytic reduction of NOx with NH3. The addition of tourmaline enhanced the catalytic activity and SO2 tolerance performance of the NixMn3-xO4 catalyst. The SCR reaction mostly follows Langmuir-Hinshelwood (L-H) mechanisms, with nitrate bidentate and bridge nitrate being the primary NOx adsorption materials on the NixMn3-xO4/T catalyst.

CATALYSIS LETTERS (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Supported catalysts for simultaneous removal of SO2, NOx, and Hg0 from industrial exhaust gases: A review

Ke Zhao et al.

Summary: This paper reviews the simultaneous removal of SO2, NOx, and Hg-0 from industrial exhaust flue gas by catalysts, discussing catalyst types, research progress, and the effects of flue gas components on removal efficiency.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection
Article Chemistry, Physical

Role of silver species in H2-NH3-SCR of NOx over Ag/Al2O3 catalysts: Operando spectroscopy and DFT calculations

Guangyan Xu et al.

Summary: The study revealed the presence of various silver species on Ag/Al2O3 catalysts, with metallic silver clusters identified as the active sites for nitrate formation and the reduction of silver nitrates being the rate-determining step in the H-2-NH3-SCR reaction.

JOURNAL OF CATALYSIS (2021)

Add to Collection
Article Chemistry, Applied

One-pot synthesis of hollow single crystal SSZ-13 zeolite by creating aluminum gradients with excellent activity for NH3-SCR

Shujun Deng et al.

Summary: Hollow zeolite SSZ-13 single crystals were successfully synthesized in this study without using additional templates, by adjusting the spatial chemistry distribution of elements and forming cavities through selective desiliconization. Furthermore, doping with copper resulted in enhanced catalytic activity of hollow Cu-SSZ-13 zeolite in the selective catalytic reduction (SCR) of NOx with NH3 compared to traditional solid Cu-SSZ-13.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection
Article Environmental Sciences

Boosting the surface oxygen activity for high performance Iron-based perovskite oxide

Mudi Wu et al.

Summary: The introduction of nickel atoms and nanorods structures significantly enhances the surface oxygen activity and catalytic performance of perovskite oxides, leading to a temperature reduction of approximately 90 degrees Celsius for the oxidation of toluene.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection
Article Chemistry, Physical

Promotional effect and mechanism of the modification of Ce on the enhanced NH3-SCR efficiency and the low temperature hydrothermal stability over Cu/SAPO-34 catalysts

Bin Guan et al.

Summary: The addition of cerium can enhance the SCR performance and low temperature hydrothermal stability of Cu/SAPO-34 catalyst. Fresh samples of CuCe/SAPO-34 showed higher catalytic activity, while aged catalysts exhibited higher efficiency below 400℃.

APPLIED CATALYSIS A-GENERAL (2021)

Add to Collection
Article Chemistry, Physical

Deactivation of CeO2-TiO2 catalyst by K2SO4 for NH3-SCR: An experimental and DFT study

Ye Jiang et al.

Summary: This study investigated the poisoning mechanism of K2SO4 on CeO2-TiO2 catalyst, finding that K2SO4 can affect the reducibility and surface acidity of the catalyst, inhibit NH3 adsorption, promote NOx adsorption, and decrease the reactivity of newly formed NOx. Additionally, the presence of K+ and SO42- simultaneously had an adverse effect on surface acidity and redox ability of the catalyst.

APPLIED SURFACE SCIENCE (2021)

Add to Collection
Review Engineering, Environmental

A review on alkaline earth metal titanates for applications in photocatalytic water purification

Rafael R. Solis et al.

Summary: This review comprehensively covers the applications of alkaline earth metal titanate-based photocatalysts in water pollutant removal, focusing on strategies for improving photocatalytic performance. The study highlights discussions on key issues that may impact future real applications, along with an overview of techniques used to assess the contribution of different reactive oxidation species.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Energy & Fuels

Thermal performance and NOx emission characteristics studies on a premixed methane-ammonia-fueled micro-planar combustor

Yuze Sun et al.

Summary: This study numerically investigates the thermal and emission performances of a micro-planar combustor fueled with a methane/ammonia mixture. The results show complex variations in outer wall temperature and non-uniformity with different parameters, as well as contradictory trends in CO and NO emissions with equivalence ratios.

FUEL (2021)

Add to Collection
Article Chemistry, Physical

Simultaneous removal of NO and N2O over commercial V2O5-MoO3/TiO2 catalyst modified with bismuth-nickel oxides

Li Zhao et al.

Summary: The study modified commercial V2O5-MoO3/TiO2 catalysts with Bi-Ni mixed metal oxides for simultaneous removal of NO and N2O. It was found that the catalytic decomposition of N2O was dramatically promoted while maintaining high removal efficiencies for NO and N2O. The presence of Bi-Ni species enhanced the oxygen vacancies on the catalyst surface, facilitating N2O decomposition, but also suppressed the activity of NO catalytic reduction by decreasing surface acid sites for NH3 adsorption and V5+ ratio.

APPLIED CATALYSIS A-GENERAL (2021)

Add to Collection
Article Chemistry, Physical

Excellent low-temperature NH3-SCR of NO activity and resistance to H2O and SO2 over WaCeOx (a=0.06, 0.12, 0.18, 0.24) catalysts: Key role of acidity derived from tungsten addition

Huansheng Tan et al.

Summary: The influence of different W/Ce ratios in Bimetallic WaCeOx catalysts on the NH3-SCR activity was investigated. It was found that W0.18CeOx exhibited excellent low-temperature activity, resistance to SO2/H2O, and N2 selectivity. Additionally, it showed exceptional hydrothermal stability even after treatment with 5% H2O at 800 degrees C for 12 hours, making it a promising catalyst for low-temperature NH3-SCR of NO.

APPLIED CATALYSIS A-GENERAL (2021)

Add to Collection
Article Chemistry, Physical

Impact of gas phase reactions and catalyst poisons on the NH3-SCR activity of a V2O5-WO3/TiO2 catalyst at pre-turbine position

Deniz Zengel et al.

Summary: The study investigates the impact of hydrocarbons and SO2 on a conventional vanadium-based catalyst under increased pressure, finding that pressure promotes homogeneous reactions of hydrocarbons leading to increased NO oxidation but also parasitic NH3 overconsumption. Short term exposure to 20 ppm SO2 did not lead to significant catalyst poisoning, but longer exposure resulted in increased sulfur-containing deposits at low temperatures under elevated pressures. Notably, the poisonous effect of these deposits was reversible after heating to high temperatures.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection
Article Chemistry, Physical

The promoting mechanism of in situ Zr doping on the hydrothermal stability of Fe-SSZ-13 catalyst for NH3-SCR reaction

Zhen Chen et al.

Summary: The study shows that in situ introduction of Zr and Fe into Fe-SSZ-13 can significantly enhance its hydrothermal stability, improving the dispersion of active Fe ions, inhibiting migration and agglomeration, and promoting the formation of reaction intermediates to enhance catalyst activity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection
Article Engineering, Environmental

Comparative Study of SO2 and SO2/SO3 Poisoning and Regeneration of Cu/BEA and Cu/SSZ-13 for NH3 SCR

Xavier Auvray et al.

Summary: The two copper-exchanged zeolites, Cu/SSZ-13 and Cu/BEA, showed different resistance to sulfur poisoning, with Cu/BEA being less affected by sulfur. NH3 temperature-programmed desorption demonstrated no loss of storage sites upon sulfur treatment and regeneration process. Partial activity recovery was observed under high-temperature SCR conditions.

EMISSION CONTROL SCIENCE AND TECHNOLOGY (2021)

Add to Collection
Article Thermodynamics

Synergy effects analysis on CDPF regeneration performance enhancement and NOx concentration reduction of NH3-SCR over Cu-ZSM-5

Chao Zhong et al.

Summary: The study reveals that CDPF passive regeneration affects SCR performance, while active regeneration deteriorates SCR performance. SCR NOX conversion varies with the change of NO2 concentration at the outlet of CDPF, while the outlet oxygen concentration of CDPF mainly influences downstream SCR performance under active regeneration conditions.

ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Investigation on hydrogen-fueled combustion characteristics and thermal performance in a micro heat-recirculation combustor inserted with block

Jia Wei et al.

Summary: Numerical investigation was conducted on premixed H2/air combustion in a micro heat-recirculation combustor with/without block. The findings show that block setting enhances flame stability and preheating effect, while also reducing heat loss via exhaust gas. Combustor with a transverse block demonstrates better thermal performance compared to longitudinal block, with increasing block height leading to broadening of high-temperature zone and improved radiation efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NOx reduction performance

Cheng Peng et al.

Summary: The hierarchically porous Cu-SSZ-13 zeolite with enriched mesopores, named Cu-SSZ-13-HP, exhibited enhanced low-temperature activity and a widened active temperature window compared to traditional Cu-SSZ-13 with only micropores. Furthermore, Cu-SSZ-13-HP showed superior hydrothermal stability and improved sulfur dioxide tolerance, making it a promising candidate for the reduction of NOx emissions from diesel vehicles at low temperatures.

JOURNAL OF CATALYSIS (2021)

Add to Collection
Article Engineering, Environmental

Revealing the effect of paired redox-acid sites on metal oxide catalysts for efficient NOx removal by NH3-SCR

Wei Tan et al.

Summary: The study revealed that the NH3-SCR activity of Nb2O5-CeO2 and WO3-CeO2 catalysts depends significantly on the strong interaction between the redox component (CeO2) and acidic component (Nb2O5 or WO3), as well as the presence of paired redox-acid sites. At lower temperatures (200 degrees Celsius), NH3-SCR activity is primarily influenced by the surface acidity of the catalysts, while at higher NOx conversion rates, the activity is more determined by the redox properties.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Insights into the co-doping effect of Fe3+ and Zr4+ on the anti-K performance of CeTiOx catalyst for NH3-SCR reaction

Keke Kang et al.

Summary: A novel K-resistant Fe3+ and Zr4+ co-doped CeTiOx catalyst was prepared for NH3-SCR of NOx, showing superior K-resistance and improved activity after K-poisoning. The proposed anti-K poisoning mechanism involves sacrificial Fe and Zr forming protective species, as well as additional reducibility and surface acidity enhancing distribution.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Evolution mechanism of transition metal in NH3-SCR reaction over Mn-based bimetallic oxide catalysts: Structure-activity relationships

Yiran Shi et al.

Summary: The study found that cobalt is more easily enriched on the surface of manganese-based bimetallic oxide catalysts, exhibiting the best deNO(x) activity and SO2 tolerance. The role of different transition metals and the structure-activity relationships were systematically investigated using advanced techniques.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Copper in LaMnO3 to promote peroxymonosulfate activation by regulating the reactive oxygen species in sulfamethoxazole degradation

Panpan Gao et al.

Summary: This study investigated the role of copper in promoting PMS activation performance of LaMnO3 for efficient degradation of SMX in water treatment. The results showed that Cu-LaMnO3 could regulate the production of reactive oxygen species (ROS) and achieve radical dominant PMS activation mechanism, leading to enhanced catalytic activity compared to LaMnO3 alone. This study provides new insights for improving the catalytic activity of perovskites in PMS activation in water treatment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Support promotion effect on the SO2 and K+ co-poisoning resistance of MnO2/TiO2 for NH3-SCR of NO

Lu Wei et al.

Summary: According to the study, Mn-based catalysts with SO2&K co-poisoning exhibit higher SCR activity than catalysts poisoned by SO2 or K individually. The majority of K adsorbed on the support leads to increased alkalinity, promoting the adsorption of SO2 and reducing the toxicity of the active component.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Atomic layer deposition of silica to improve the high-temperature hydrothermal stability of Cu-SSZ-13 for NH3 SCR of NOx

Heyuan Tian et al.

Summary: Coating Cu-SSZ-13 with a stable SiO2 nanolayer using atomic layer deposition method effectively improves its high-temperature hydrothermal stability, preventing leaching of alumina without affecting the zeolite's pores and catalytic activity.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Impact of NOx and NH3 addition on toluene oxidation over MnOx-CeO2 catalyst

Lyumeng Ye et al.

Summary: The simultaneous addition of NOx and NH3 has a significant impact on the oxidation of toluene over the MnOx-CeO2 catalyst, with NH3-SCR reactants and NO2 adsorption state playing important roles in deactivation. Adsorbed NO2 can enhance toluene oxidation, while nitrate species on the surface are inactive. NO2 adsorption is the weakest among the reactants, limiting its promotion of toluene oxidation.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Promotion of NH3-SCR activity by sulfate-modification over mesoporous Fe doped CeO2 catalyst: Structure and mechanism

Hui Wang et al.

Summary: The mesoporous Fe-doped CeO2 catalyst, modified with organic sulfate functional groups, exhibits excellent activity with over 80% NOx conversion in a temperature range of 250-450 degrees C. The strong electron interaction between Fe-O-Ce species and sulfate groups alters the acidity and redox properties of the catalyst, leading to the generation of new Brønsted acid sites and promoting NOx conversion.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Chemical

Improvement of NH3-SCR activity and resistance to SO2 and H2O by Ce modified La-Mn perovskite catalyst

Xueke Shi et al.

Summary: Ce-modified La-Mn perovskite catalysts exhibit enhanced catalytic performance for NOx removal, achieving high conversion rates at relatively low temperatures and maintaining stability in the presence of sulfur dioxide and water. Ce doping improves the catalyst's tolerance to SO2 and enhances its specific surface area, acidic sites, chemically adsorbed oxygen, and redox performance.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection
Article Chemistry, Applied

Enhanced hydrothermal stability of Cu/SSZ-39 with increasing Cu contents, and the mechanism of selective catalytic reduction of NOx

Guangying Fu et al.

Summary: Cu/SSZ-39 is an alternative highly effective catalyst for the selective catalytic reduction of NOx compounds in Diesel exhaust, with its hydrothermal stability depending on copper content. Mutual protective effect is observed between Cu2+ ion species and framework tetrahedral Al atoms. In situ DRIFTS suggests a mixed Eley-Rideal and Langmuir-Hinshelwood mechanism for SCR reactions over this catalyst at low temperatures.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection
Article Chemistry, Applied

One-step ion-exchange from Na-SSZ-13 to Cu-SSZ-13 for NH3-SCR by adjusting the pH value of Cu-exchange solution: The effect of H plus ions on activity and hydrothermal stability

Huawang Zhao et al.

Summary: A one-step ion-exchange method was developed to prepare high-performance Cu-SSZ-13 from Na-SSZ-13 by adjusting the pH values of the Cu salt solution. The concentration of H+ significantly influences the loading and distribution of Cu, affecting both catalytic activity and hydrothermal stability.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection
Article Green & Sustainable Science & Technology

Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic

Qingguo Peng et al.

Summary: The study found that a small porosity of porous medium can improve flame stability and heat transfer, but has adverse effects on component flow and flame propagation. The use of multi-PM-layers helps balance the opposing effects on fluidity and thermal performance, leading to higher combustion efficiency and radiation temperature.

RENEWABLE ENERGY (2021)

Add to Collection
Article Engineering, Chemical

Facile synthesis of hollow nanotube MnCoOx catalyst with superior resistance to SO2 and alkali metal poisons for NH3-SCR removal of NOx

Yiran Shi et al.

Summary: By designing a unique catalyst structure, the study achieved high resistance to SO2 and alkali metals in industrial flue gas, leading to excellent catalytic performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection
Article Engineering, Environmental

Pd atomic layer coating enhances CO2 hydrogenation to CH3OH fuel on Cu@Pd(111) core-shell structure catalyst

Ziqi Wang et al.

Summary: The Pd atomic layer coating effectively reduces the activation energy barrier in CO2 hydrogenation to methanol, facilitating the catalytic process and improving product selectivity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Engineering, Environmental

Novel CeZrTiAl catalyst for NH3-SCR of NOx based on Ti-bearing BFS

Pijun Gong et al.

Summary: This study successfully prepared an excellent denitrification CeZrTiAl catalyst by utilizing gamma-Al2O3 nanosheets structure as a framework to disperse active components and increase surface area, and by controlling pH to prepare important gamma-AlOOH precursor.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Engineering, Environmental

NiMn2O4 sphere catalyst for the selective catalytic reduction of NO by NH3: Insight into the enhanced activity via solvothermal method

Jiangning Liu et al.

Summary: The study evaluates NiMn2O4 sphere (NiMn2O4-S) and NiMn2O4 particle (NiMn2O4-P) as catalysts for low temperature NH3-SCR, demonstrating that NiMn2O4-S shows superior catalytic activity mainly through the Eley-Rideal mechanism, attributed to its larger specific surface area contributing to enhanced activity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Chemistry, Applied

Effects of Mo addition on the NH3-SCR of NO reaction over MoaMnTi10Ox (a=0.2, 0.4, 0.6 and 0.8): Synergistic action between redox and acidity

Yushi Li et al.

CATALYSIS TODAY (2020)

Add to Collection
Review Chemistry, Applied

The way to enhance the thermal stability of V2O5-based catalysts for NH3-SCR

Zidi Yan et al.

CATALYSIS TODAY (2020)

Add to Collection
Article Engineering, Environmental

Highly active NbOPO4 supported Cu-Ce catalyst for NH3-SCR reaction with superior sulfur resistance

Xiaoqiang Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Chemistry, Physical

The promoting effect of S-doping on the NH3-SCR performance of MnOx/TiO2 catalyst

Xuesong Liu et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection
Article Chemistry, Physical

Influence of Sm on the low temperature NH3-SCR of NO activity and H2O/SO2 resistance over the SmaMnNi2Ti7Ox (a=0.1, 0.2, 0.3, 0.4) catalysts

Yongming Tong et al.

APPLIED CATALYSIS A-GENERAL (2020)

Add to Collection
Article Chemistry, Physical

A MnO2-based catalyst with H2O resistance for NH3-SCR: Study of catalytic activity and reactants-H2O competitive adsorption

Ningqiang Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection
Article Chemistry, Physical

Influence of preparation methods on iron-tungsten composite catalyst for NH3-SCR of NO: The active sites and reaction mechanism

Qiulin Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection
Article Engineering, Environmental

Surface lattice oxygen activation via Zr4+ cations substituting on A2+ sites of MnCr2O4 forming ZrxMn1-xCr2O4 catalysts for enhanced NH3-SCR performance

Erhao Gao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Environmental Sciences

One-step Ferrate(VI) treatment as a core process for alternative drinking water treatment

Huiqin Zhang et al.

CHEMOSPHERE (2020)

Add to Collection
Article Environmental Sciences

Excellent low-temperature NH3-SCR NO removal performance and enhanced H2O resistance by Ce addition over the Cu0.02Fe0.2CeyTi1-yOx(y=0.1, 0.2, 0.3) catalysts

Shibo Ma et al.

CHEMOSPHERE (2020)

Add to Collection
Article Engineering, Environmental

One-pot synthesis of layered mesoporous ZSM-5 plus Cu ion-exchange: Enhanced NH3-SCR performance on Cu-ZSM-5 with hierarchical pore structures

Cheng Peng et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

Insights into the catalytic behavior of LaMnO3 perovskite for Hg0 oxidation by HCl

Zhen Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

A superior Fe-V-Ti catalyst with high activity and SO2 resistance for the selective catalytic reduction of NOx with NH3

Na Zhu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Enhancement of high-temperature selectivity on Cu-SSZ-13 towards NH3-SCR reaction from highly dispersed ZrO2

Bo Peng et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection
Article Chemistry, Physical

Fabrication of high-silica Cu/ZSM-5 with confinement encapsulated Cu-based active species for NH3-SCR

Yaoyao Wang et al.

CATALYSIS COMMUNICATIONS (2020)

Add to Collection
Article Engineering, Environmental

The effect of non-selective oxidation on the Mn2Co1Ox catalysts for NH3-SCR: Positive and non-positive

Wenjuan Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Engineering, Environmental

The role of the Cu dopant on a Mn3O4 spinel SCR catalyst: Improvement of low-temperature activity and sulfur resistance

Shangchao Xiong et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Engineering, Environmental

Promotional role of Mo on Ce0.3FeOx catalyst towards enhanced NH3-SCR catalytic performance and SO2 resistance

Xiaolong Tang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Engineering, Environmental

Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect

Jian Liang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

Highly efficient WO3-FeOx catalysts synthesized using a novel solvent-free method for NH3-SCR

Huimin Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Low temperature high activity of M (M = Ce, Fe, Co, Ni) doped M-Mn/TiO2 catalysts for NH3-SCR and in situ DRIFTS for investigating the reaction mechanism

Shangzhi Xie et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection
Article Chemistry, Physical

Structural parameters governing low temperature activity of small pore copper zeolites in NH3-SCR

Michiel De Prins et al.

JOURNAL OF CATALYSIS (2020)

Add to Collection
Article Chemistry, Physical

Evolution mechanism of NOx in NH3-SCR reaction over Fe-ZSM-5 catalyst: Species-performance relationships

Pan Wang et al.

APPLIED CATALYSIS A-GENERAL (2020)

Add to Collection
Article Chemistry, Physical

Electroplating sludge-derived spinel catalysts for NO removal via NH3 selective catalysis reduction

Senyuan Shen et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection
Article Chemistry, Physical

Degradation of perfluorooctanoic acid adsorbed on Fe-zeolites with molecular oxygen as oxidant under UV-A irradiation

Lin Qian et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection
Article Chemistry, Applied

Fabrication of Cu-CHA composites with enhanced NH3-SCR catalytic performances and hydrothermal stabilities

Lijing Sun et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

Effect of hierarchical element doping on the low-temperature activity of manganese-based catalysts for NH3-SCR

Xiaolong Tang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Characterization and microwave absorption of spinel MFe2O4 (M = Mg, Mn, Zn) nanoparticles prepared by a facile oxidation-precipitation process

Junsheng Xue et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Improvement of activity, selectivity and H2O&SO2-tolerance of micro-mesoporous CrMn2O4 spinel catalyst for low-temperature NH3-SCR of NOx

Fengyu Gao et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Chemistry, Applied

NH3-SCR performance of WO3 blanketed CeO2 with different morphology: Balance of surface reducibility and acidity

Dong Wang et al.

CATALYSIS TODAY (2019)

Add to Collection
Article Chemistry, Applied

Ce doping to Cu-SAPO-18: Enhanced catalytic performance for the NH3-SCR of NO in simulated diesel exhaust

Shuai Han et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Enhancing DeNOx performance of CoMnAl mixed metal oxides in low-temperature NH3-SCR by optimizing layered double hydroxides (LDHs) precursor template

Xu Wu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Engineering, Environmental

V2O5-modified Mn-Ce/AC catalyst with high SO2 tolerance for low-temperature NH3-SCR of NO

Lijun Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Article Engineering, Environmental

Three-dimensional nanoflower MnCrOx/Sepiolite catalyst with increased SO2 resistance for NH3-SCR at low temperature

Aijuan Xie et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Article Chemistry, Physical

Promotion of surface acidity and surface species of doped Fe and SO42- over CeO2 catalytic for NH3-SCR reaction

Xuejun Zhang et al.

MOLECULAR CATALYSIS (2019)

Add to Collection
Article Chemistry, Physical

Promotion effect and mechanism of the addition of Mo on the enhanced low temperature SCR of NOx by NH3 over MnOx/γ-Al2O3 catalysts

Gang Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection
Article Engineering, Environmental

Promotional effect of SO2 on Cr2O3 catalysts for the marine NH3-SCR reaction

Mingyu Guo et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Article Chemistry, Physical

The role of molybdenum on the enhanced performance and SO2 resistance of V/Mo-Ti catalysts for NH3-SCR

Dong Wook Kwon et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection
Article Chemistry, Inorganic & Nuclear

A dual-template method for the synthesis of bimetallic CuNi/SSZ-13 zeolite catalysts for NH3-SCR reaction

Mengyang Chen et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2019)

Add to Collection
Article Engineering, Environmental

Design of a hierarchical Fe-ZSM-5@CeO2 catalyst and the enhanced performances for the selective catalytic reduction of NO with NH3

Liang Chen et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Selective Catalytic Reduction of NOx with NH3 by Using Novel Catalysts: State of the Art and Future Prospects

Lupeng Han et al.

CHEMICAL REVIEWS (2019)

Add to Collection
Article Chemistry, Physical

Research progress, challenges and perspectives on the sulfur and water resistance of catalysts for low temperature selective catalytic reduction of NOx by NH3

Huaijian Wang et al.

APPLIED CATALYSIS A-GENERAL (2019)

Add to Collection
Article Engineering, Environmental

Porous clay heterostructures (PCHs) modified with copper ferrite spinel as catalyst for SCR of NO with C3H6

Minhao Yuan et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Article Energy & Fuels

Cu/SSZ-13 zeolites prepared by in situ hydrothermal synthesis method as NH3-SCR catalysts: Influence of the Si/Al ratio on the activity and hydrothermal properties

Han Jiang et al.

FUEL (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Effect of post-treatment on the selective catalytic reduction of NO with NH3 over Mn3O4

Song Shu et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection
Article Chemistry, Physical

Relationship between structure and performance of a novel highly dispersed MnOx on Co-Al layered double oxide for low temperature NH3-SCR

Ruihua Wang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection
Article Engineering, Environmental

Novel MnaZrbCrcOx catalysts for low temperature NH3-SCR derived from high H2O content flue gas via natural gas combustion

Peipei Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection
Article Chemistry, Physical

Comprehensive understanding the promoting effect of Dy-doping on MnFeOx nanowires for the low-temperature NH3-SCR of NOx: An experimental and theoretical study

Chen Gao et al.

JOURNAL OF CATALYSIS (2019)

Add to Collection
Article Chemistry, Physical

The effect of copper loading and silicon content on catalytic activity and hydrothermal stability of Cu-SAPO-18 catalyst for NH3-SCR

Shujun Ming et al.

APPLIED CATALYSIS A-GENERAL (2018)

Add to Collection
Article Chemistry, Physical

Spinel structured CoaMnbOx mixed oxide catalyst for the selective catalytic reduction of NOx with NH3

Dongmei Meng et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection
Article Chemistry, Physical

Mo doping as an effective strategy to boost low temperature NH3-SCR performance of CeO2/TiO2 catalysts

Lulu Li et al.

CATALYSIS COMMUNICATIONS (2018)

Add to Collection
Article Engineering, Environmental

One-pot synthesis of high performance Cu-SAPO-18 catalyst for NO reduction by NH3-SCR: Influence of silicon content on the catalytic properties of Cu-SAPO-18

Zhen Chen et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Hierarchically porous LaFeO3 perovskite prepared from the pomelo peel bio-template for catalytic oxidation of NO

Shaojun Zhao et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

Add to Collection
Article Chemistry, Applied

Promotion effect of H2 pretreatment on CeO2 catalyst for NH3-SCR reaction

Hongbing Lv et al.

JOURNAL OF RARE EARTHS (2018)

Add to Collection
Article Chemistry, Applied

Characterization and NH3-SCR reactivity of Cu-Fe-ZSM-5 catalysts prepared by solid state ion exchange: The metal exchange order effect

Houda Jouini et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

The effects of tungsten and hydrothermal aging in promoting NH3-SCR activity on V2O5/WO3-TiO2 catalysts

Hongfeng Chen et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection
Article Chemistry, Physical

The promoted performance of CeO2 catalyst for NH3-SCR reaction by NH3 treatment

Xiao Sun et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection
Article Engineering, Environmental

Synergistic effect between the redox property and acidity on enhancing the low temperature NH3-SCR activity for NOx removal over the Co0.2CexMn0.8-xTi10 (x=0-0.40) oxides catalysts

Liqiang Chen et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection
Article Engineering, Environmental

Evaluation of two fibrous clay minerals (sepiolite and palygorskite) for CO2 Capture

J. A. Cecilia et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Add to Collection
Article Chemistry, Applied

Having it both ways: delicate hierarchical structure and robust mechanical stability on micro/nanomaterials with mesoporous silica coating

Zhi-Min Cui et al.

JOURNAL OF POROUS MATERIALS (2017)

Add to Collection
Article Chemistry, Applied

Simultaneous NO and mercury removal over MnOx/TiO2 catalyst in different atmospheres

Shibo Zhang et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection
Article Chemistry, Physical

Suspension stability and mobility of Trap-Ox Fe-zeolites for in-situ nanoremediation

Glenn Gillies et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection
Article Engineering, Environmental

Simultaneous removal of NO and Hg0 over Ce-Cu modified V2O5/TiO2 based commercial SCR catalysts

Guilong Chi et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection
Article Engineering, Chemical

Neodymium promotion on the low-temperature hydrothermal stability of a Cu/SAPO-34 NH3-SCR monolith catalyst

Xi Feng et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Add to Collection
Article Engineering, Environmental

Zeolites as recyclable adsorbents/catalysts for biogas upgrading: Removal of octamethylcyclotetrasiloxane

Alba Cabrera-Codony et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection
Article Chemistry, Physical

Effect of gas compositions on SO2 poisoning over Cu/SSZ-13 used for NH3-SCR

Kurnia Wijayanti et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection
Article Chemistry, Physical

Cage-based small-pore catalysts for NH3-SCR prepared by combining bulky organic structure directing agents with modified zeolites as reagents

Nuria Martin et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection
Article Chemistry, Physical

Flame spray pyrolysis-designed silica/ceria-zirconia supports for the carbon dioxide reforming of methane

Emma C. Lovell et al.

APPLIED CATALYSIS A-GENERAL (2017)

Add to Collection
Article Chemistry, Physical

NH3-SCR of NO over one-pot Cu-SAPO-34 catalyst: Performance enhancement by doping Fe and MnCe and insight into N2O formation

Dong Zhang et al.

APPLIED CATALYSIS A-GENERAL (2017)

Add to Collection
Article Engineering, Environmental

Synthesis of Fe-ZSM-5@Ce/mesoporous-silica and its enhanced activity by sequential reaction process for NH3-SCR

Lei Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection
Article Chemistry, Physical

Efficiency of Cu and Pd substitution in Fe-based perovskites to promote N2 formation during NH3 selective catalytic oxidation (NH3-SCO)

Peixin Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection
Article Chemistry, Physical

Enhancing Ni-SiO2 catalysts for the carbon dioxide reforming of methane: Reduction-oxidation-reduction pre-treatment

Emma C. Lovell et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection
Article Chemistry, Physical

Catalytic oxidation and adsorption of Hg0 over low-temperature NH3-SCR LaMnO3 perovskite oxide from flue gas

Haomiao Xu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection
Article Chemistry, Physical

MnOx supported on Fe-Ti spinel: A novel Mn based low temperature SCR catalyst with a high N2 selectivity

Shijian Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection
Article Thermodynamics

Experiment and modeling of low-concentration methane catalytic combustion in a fluidized bed reactor

Zhongqing Yang et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection
Article Chemistry, Physical

A novel one-pot synthesized CuCe-SAPO-34 catalyst with high NH3-SCR activity and H2O resistance

Can Niu et al.

CATALYSIS COMMUNICATIONS (2016)

Add to Collection
Article Chemistry, Physical

Cu-Mn bimetal ion-exchanged SAPO-34 as an active SCR catalyst for removal of NOx from diesel engine exhausts

Liming Huang et al.

CATALYSIS COMMUNICATIONS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Recent progress in catalytic NO decomposition

Masaaki Haneda et al.

COMPTES RENDUS CHIMIE (2016)

Add to Collection
Article Energy & Fuels

The enhanced performance of ceria by HF treatment for selective catalytic reduction of NO with NH3

Ning-zhi Yang et al.

FUEL (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Catalysis in a Cage: Condition-Dependent Speciation and Dynamics of Exchanged Cu Cations in SSZ-13 Zeolites

Christopher Paolucci et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection
Article Engineering, Chemical

La1-xCexMnO3/attapulgite nanocomposites as catalysts for NO reduction with NH3 at low temperature

Xiazhang Li et al.

PARTICUOLOGY (2016)

Add to Collection
Article Chemistry, Physical

Selective catalytic reduction of nitric oxide with ammonia over high-activity Fe/SSZ-13 and Fe/one-pot-synthesized Cu-SSZ-13 catalysts

Chengyang Yin et al.

CATALYSIS SCIENCE & TECHNOLOGY (2016)

Add to Collection
Review Chemistry, Physical

Ceria-based catalysts for low-temperature selective catalytic reduction of NO with NH3

Changjin Tang et al.

CATALYSIS SCIENCE & TECHNOLOGY (2016)

Add to Collection
Article Chemistry, Physical

N2O formation in the selective catalytic reduction of NOx with NH3 on a CeMoOx catalyst

Jihui Wang et al.

APPLIED CATALYSIS A-GENERAL (2015)

Add to Collection
Article Chemistry, Physical

IR studies of Fe modified ZSM-5 zeolites of diverse mesopore topologies in the terms of their catalytic performance in NH3-SCR and NH3-SCO processes

Kinga Gora-Marek et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection
Article Chemistry, Physical

Deactivation of Cu/SAPO-34 during low-temperature NH3-SCR

Kirsten Leistner et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection
Article Chemistry, Physical

Fe/SSZ-13 as an NH3-SCR catalyst: A reaction kinetics and FTIR/Mossbauer spectroscopic study

Feng Gao et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection
Article Chemistry, Applied

Impact of sulfation and desulfation on NOx reduction using Cu-chabazite SCR catalysts

D. William Brookshear et al.

CATALYSIS TODAY (2015)

Add to Collection
Article Engineering, Environmental

Synthesis, activity and hydrophobicity of Fe-ZSM-5@silicalite-1 for NH3-SCR

Tianyu Du et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection
Article Chemistry, Physical

Improvement of low-temperature hydrothermal stability of Cu/SAPO-34 catalysts by Cu2+ species

Jun Wang et al.

JOURNAL OF CATALYSIS (2015)

Add to Collection
Article Chemistry, Physical

A study on chemisorbed oxygen and reaction process of Fe-CuOx/ZSM-5 via ultrasonic impregnation method for low-temperature NH3-SCR

Lin Zhu et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2015)

Add to Collection
Article Chemistry, Physical

The mechanism of the effect of H2O on the low temperature selective catalytic reduction of NO with NH3 over Mn-Fe spinel

Shangchao Xiong et al.

CATALYSIS SCIENCE & TECHNOLOGY (2015)

Add to Collection
Article Nanoscience & Nanotechnology

DRIFT Study of CuO-CeO2-TiO2 Mixed Oxides for NOx Reduction with NH3 at Low Temperatures

Lei Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection
Article Chemistry, Applied

NH3-SCR over Cu/SAPO-34 - Zeolite acidity and Cu structure changes as a function of Cu loading

Di Wang et al.

CATALYSIS TODAY (2014)

Add to Collection
Article Engineering, Environmental

LaFeO3 and BiFeO3 perovskites as nanocatalysts for contaminant degradation in heterogeneous Fenton-like reactions

Klara Rusevova et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection
Article Chemistry, Physical

Understanding ammonia selective catalytic reduction kinetics over Cu/SSZ-13 from motion of the Cu ions

Feng Gao et al.

JOURNAL OF CATALYSIS (2014)

Add to Collection
Article Chemistry, Physical

Identifying active sites for fast NH3-SCR of NO/NO2 mixtures over Fe-ZSM-5 by operando EPR and UV-vis spectroscopy

Roxana Perez Velez et al.

JOURNAL OF CATALYSIS (2014)

Add to Collection
Article Chemistry, Physical

Tailoring of the structure of Fe-cationic species in Fe-ZSM-5 by distribution of Al atoms in the framework for N2O decomposition and NH3-SCR-NOx

Petr Sazama et al.

JOURNAL OF CATALYSIS (2014)

Add to Collection
Article Engineering, Chemical

Experimental and kinetic modeling study of NH3-SCR of NOx on Fe-ZSM-5, Cu-chabazite and combined Fe- and Cu-zeolite monolithic catalysts

Pranit S. Metkar et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Add to Collection
Review Chemistry, Multidisciplinary

Catalysis by Doped Oxides

Eric W. McFarland et al.

CHEMICAL REVIEWS (2013)

Add to Collection
Article Chemistry, Physical

Low-temperature selective catalytic reduction of NO with NH3 using perovskite-type oxides as the novel catalysts

Runduo Zhang et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2013)

Add to Collection
Article Chemistry, Physical

Mechanistic Comparison of the Dealumination in SSZ-13 and the Desilication in SAPO-34

Torstein Fjermestad et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection
Article Chemistry, Physical

Fe-zeolites as heterogeneous catalysts in solar Fenton-like reactions at neutral pH

Rafael Gonzalez-Olmos et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Cu-SSZ-39, an active and hydrothermally stable catalyst for the selective catalytic reduction of NOx

Manuel Moliner et al.

CHEMICAL COMMUNICATIONS (2012)

Add to Collection
Article Environmental Sciences

Stabilization of potassium permanganate particles with manganese dioxide

Klara Rusevova et al.

CHEMOSPHERE (2012)

Add to Collection
Article Engineering, Environmental

Nano-sized magnetic iron oxides as catalysts for heterogeneous Fenton-like reactions-Influence of Fe(II)/Fe(III) ratio on catalytic performance

Klara Rusevova et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Add to Collection
Article Chemistry, Physical

Bioinspired Hierarchical Tin Oxide Scaffolds for Enhanced Gas Sensing Properties

Fang Song et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Add to Collection
Article Chemistry, Physical

The ammonia selective catalytic reduction activity of copper-exchanged small-pore zeolites

Dustin W. Fickel et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2011)

Add to Collection
Article Engineering, Chemical

Temperature gradients within a soot layer during DPF regeneration

K. Chen et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Add to Collection
Review Chemistry, Multidisciplinary

Catalytic NOx Abatement Systems for Mobile Sources: From Three-Way to Lean Burn after-Treatment Technologies

Pascal Granger et al.

CHEMICAL REVIEWS (2011)

Add to Collection
Article Engineering, Environmental

Catalytic reduction of NOx with NH3 over different-shaped MnO2 at low temperature

Wei Tian et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection
Article Chemistry, Physical

Adsorption of NO Molecule on Spinel-Type CuFe2O4 Surface: A First-Principles Study

Zhi Jiang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Sol-gel nanocasting synthesis of patterned hierarchical LaFeO3 fibers with enhanced catalytic CO oxidation activity

Pengna Li et al.

NANOSCALE (2011)

Add to Collection
Article Multidisciplinary Sciences

A Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles

Jin Suntivich et al.

SCIENCE (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Homogeneously Dispersed Ceria Nanocatalyst Stabilized with Ordered Mesoporous Alumina

Quan Yuan et al.

ADVANCED MATERIALS (2010)

Add to Collection
Article Chemistry, Physical

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

Xiang Gao et al.

CATALYSIS COMMUNICATIONS (2010)

Add to Collection
Article Chemistry, Physical

The enhanced performance of ceria with surface sulfation for selective catalytic reduction of NO by NH3

Tingting Gu et al.

CATALYSIS COMMUNICATIONS (2010)

Add to Collection
Article Chemistry, Physical

Cr-MnOx mixed-oxide catalysts for selective catalytic reduction of NOx with NH3 at low temperature

Zhihang Chen et al.

JOURNAL OF CATALYSIS (2010)

Add to Collection
Article Chemistry, Physical

Activity, stability and hydrocarbon deactivation of Fe/Beta catalyst for SCR of NO with ammonia

Chongheng He et al.

APPLIED CATALYSIS A-GENERAL (2009)

Add to Collection
Article Chemistry, Physical

Effect of SO2 on V2O5/ACF catalysts for NO reduction with NH3 at low temperature

Yaqin Hou et al.

CATALYSIS COMMUNICATIONS (2009)

Add to Collection
Article Chemistry, Physical

Ammonia blocking of the Fast SCR reactivity over a commercial Fe-zeolite catalyst for Diesel exhaust aftertreatment

Antonio Grossale et al.

JOURNAL OF CATALYSIS (2009)

Add to Collection
Article Engineering, Environmental

Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods

Boqiong Jiang et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection
Article Chemistry, Physical

Selective catalytic reduction of NO by ammonia using mesoporous Fe-containing HZSM-5 and HZSM-12 zeolite catalysts: An option for automotive applications

A. L. Kustov et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2007)

Add to Collection
Article Chemistry, Physical

Manganese oxide catalysts for NOx reduction with NH3 at low temperatures

Min Kang et al.

APPLIED CATALYSIS A-GENERAL (2007)

Add to Collection
Article Engineering, Environmental

Experimental study on a low-temperature SCR catalyst based on MnOx/TiO2 prepared by sol-gel method

Zhongbiao Wu et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

Add to Collection
Article Chemistry, Physical

Low temperature selective catalytic reduction of NOx with NH3 over amorphous MnOx catalysts prepared by three methods

Xiaolong Tang et al.

CATALYSIS COMMUNICATIONS (2007)

Add to Collection
Article Chemistry, Physical

V2O5-WO3/TiO2-SiO2-SO42- catalysts:: Influence of active components and supports on activities in the selective catalytic reduction of NO by NH3 and in the oxidation of SO2

M Kobayashi et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2006)

Add to Collection
Article Multidisciplinary Sciences

Increase in tropospheric nitrogen dioxide over China observed from space

A Richter et al.

NATURE (2005)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.