4.7 Article

Fuel property impacts on gaseous and PM emissions from a multi-mode single-cylinder engine

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Production, fuel properties and combustion testing of an iso-olefins blendstock for modern vehicles

Vanessa Lebarbier Dagle et al.

Summary: The research identified a dimethyl-hexenes rich olefins mixture (DMHROM) as a preferred bioblendstock for SI/ACI combustion engines, with potential for improving gasoline fuel performance. The production, testing, and measurements conducted validated the suitability of DMHROM for enhancing engine efficiency and fuel economy while meeting emissions regulations and ASTM specifications.
Article Thermodynamics

Ability of Particulate Matter Index to describe sooting tendency of various gasoline formulations in a stratified-charge spark-ignition engine

Namho Kim et al.

Summary: In a stratified-charge spark-ignition engine, PMI is shown to be a poor predictor of sooting tendency for tested fuels, with some fuels exhibiting behavior opposite to that predicted by PMI. Differences in the amount of soot formed are identified as the main reason for discrepancies between measured and predicted sooting tendency.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Energy & Fuels

Octane Index Applicability over the Pressure-Temperature Domain

Tommy R. Powell et al.

Summary: The octane index (OI) is a new autoignition metric developed to better describe fuel knock resistance over a broader range of engine conditions. Research found that under ACI operation, autoignition behavior is more closely correlated to fuel composition rather than RON and MON tests conditions.

ENERGIES (2021)

Review Thermodynamics

What fuel properties enable higher thermal efficiency in spark-ignited engines?

James P. Szybist et al.

Summary: The Co-Optimization of Fuels and Engines (Co-Optima) initiative aims to maximize energy efficiency and renewable fuel utilization by developing fuels and engines together. The Central Fuel Property Hypothesis (CFPH) is used to assess the potential benefits of candidate fuels regardless of their chemical composition. A thermodynamic-based assessment quantifies how six individual fuel properties can affect efficiency in spark-ignition (SI) engines, leading to a unified merit function for assessing the fuel property-based efficiency potential of fuels with conventional and unconventional compositions.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Article Energy & Fuels

The effects of distillation characteristics and aromatic content on low-load gasoline compression ignition (GCI) performance and soot emissions in a multi-cylinder engine

Flavio D. F. Chuahy et al.

Summary: The DOE Co-Optima initiative focuses on investigating the interaction between fuel properties and advanced combustion engines to improve fuel economy. Gasoline Compression Ignition (GCI) is a promising advanced compression ignition strategy that utilizes the auto-ignition resistance of gasoline-like fuels. Results from the study show that the aromatic content of the fuel has a greater impact on particulate matter emissions than the fuel's distillation characteristics.
Article Thermodynamics

Hydrocarbon impact on NO to NO2 conversion in a compression ignition engine under low-temperature combustion

Xiao Yu et al.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2019)

Article Thermodynamics

Sooting tendencies of co-optima test gasolines and their surrogates

Charles S. McEnally et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Article Engineering, Environmental

Impacts of Air-Fuel Stratification in ACI Combustion on Particulate Matter and Gaseous Emissions

Melanie Moses-DeBusk et al.

EMISSION CONTROL SCIENCE AND TECHNOLOGY (2019)

Article Energy & Fuels

Computational Fluid Dynamics Simulation of Gasoline Compression Ignition

Janardhan Kodavasal et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2015)

Article Environmental Sciences

Gas- and particle-phase primary emissions from in-use, on-road gasoline and diesel vehicles

Andrew A. May et al.

ATMOSPHERIC ENVIRONMENT (2014)

Article Transportation Science & Technology

On the Nature of Particulate Emissions from DISI Engines at Cold-Fast-Idle

Justin E. Ketterer et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2014)

Article Engineering, Chemical

The Impact of Ethanol Fuel Blends on PM Emissions from a Light-Duty GDI Vehicle

M. Matti Maricq et al.

AEROSOL SCIENCE AND TECHNOLOGY (2012)

Article Engineering, Mechanical

Correlation Between Speciated Hydrocarbon Emissions and Flame Ionization Detector Response for Gasoline/Alcohol Blends

Thomas Wallner

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2011)

Article Transportation Science & Technology

Determination of Cycle Temperatures and Residual Gas Fraction for HCCI Negative Valve Overlap Operation

Russell P. Fitzgerald et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2010)

Article Transportation Science & Technology

Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions

John M. Storey et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2010)

Article Transportation Science & Technology

Development of a Predictive Model for Gasoline Vehicle Particulate Matter Emissions

Koichiro Aikawa et al.

SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2010)

Review Thermodynamics

Advanced compression-ignition engines-understanding the in-cylinder processes

John E. Dec

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Article Transportation Science & Technology

CFD-Based Optimization of a Diesel-fueled Free Piston Engine Prototype for Conventional and HCCI Combustion

Miriam Bergman et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2009)

Article Engineering, Multidisciplinary

Particle measurement programme (PMP) light-duty inter-laboratory exercise: comparison of different particle number measurement systems

Barouch Giechaskiel et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2008)

Article Thermodynamics

Kinetic modeling of the interactions between NO and hydrocarbons at high temperature

A Frassoldati et al.

COMBUSTION AND FLAME (2003)

Article Thermodynamics

Temperature dependence of NO to NO2 conversion by n-butane and n-pentane oxidation

M Hori et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)