4.7 Article

A comprehensive comparative study on methylene blue removal from aqueous solution using biochars produced from rapeseed, whitewood, and seaweed via different thermal conversion technologies

Journal

FUEL
Volume 330, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.fuel.2022.125428

Keywords

Biochar; Hydrothermal conversion; Pyrolysis; Torrefaction; Wastewater treatment Methylene blue; Adsorption

Funding

  1. EPSRC & BBSRC UK Supergen Bioenergy Hub [EP/S000771/1]
  2. University of Nottingham Anne McLaren Research Fellowship
  3. UK Biotechnology and Biological Sciences Research Council (BBSRC) Discovery Fellowship [BB/S010610/1]

Ask authors/readers for more resources

This study provides a comprehensive comparative analysis of the potential of using biochars from different UK-sourced biomass feedstocks to adsorb methylene blue dye. The results show that seaweed-based biochars have a higher adsorption capacity, while whitewood-based biochars have relatively lower adsorption levels. Kinetic models and adsorption isotherms suggest that seaweed-based biochars may offer a thermodynamically favorable process for removing methylene blue.
This paper presents, for the first time, a comprehensive comparative analysis of the potential of using biochars from three distinctly different UK-sourced biomass feedstocks, produced via three different thermal processing techniques, to adsorb methylene blue dye. Biochars were made from rapeseed, whitewood, and seaweed (Laminaria Digitata), produced via hydrothermal conversion, pyrolysis, and torrefaction. Adsorption kinetic models were developed for each biochar at different temperatures, pH and initial dye concentrations. Relatively high levels of methylene blue adsorption capacity were achieved by seaweed-based biochars (similar to 150 mg/g), with reasonable levels for rapeseed-based biochars (similar to 60 mg/g), whilst adsorption levels were found to be relatively low for whitewood-based biochars (< 30 mg/g). A Pseudo-second-order kinetic model provided the best fit with experimental results. The Langmuir adsorption isotherm showed a better fit for seaweed biochars, while the Freundlich adsorption isotherm was a better fit for the rapeseed-based biochars. The Langmuir adsorption isotherms showed relatively high maximum adsorption capacity (Qo) for seaweed-based biochars; similar to 175 mg/g for seaweed-Torrefaction and similar to 117 mg/g for seaweed-Pyrolysis. Negative Gibbs free energy (delta G degrees) values were observed for the seaweed-Torrefaction < seaweed-Pyrolysis < 0, which indicates that the methylene blue removal could be a thermodynamically favourable process due to the spontaneous nature of the adsorption. Our investigation has shown that the removal of methylene blue from wastewater could be a potential application for seaweed-based biochars as part of a holistic whole life cycle valorisation pathway. However, it is not suitable for all types of biomasses which emphasises the need for tailoring unique valorisation pathways for different types of biomasses.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available