4.7 Article

Laminar flame speeds of cyclic hydrocarbon fuels: Effect of unsaturation

Related references

Note: Only part of the references are listed.
Article Engineering, Multidisciplinary

A comparative single-pulse shock tube experiment and kinetic modeling study on pyrolysis of cyclohexane, methylcyclohexane and ethylcyclohexane

Jin-hu Liang et al.

Summary: The pyrolysis of cyclohexane, methylcyclohexane, and ethylcyclohexane at pressures of 5 and 10 bar and temperatures of 930-1550 K was studied using reflected shock waves. Pyrolysis experiments were performed in a single-pulse shock tube with reaction times ranging from 1.65 to 1.74 ms. Gas chromatography analysis was used to obtain and quantify major products. Kinetic modeling was conducted using detailed and lumped chemical kinetic mechanisms. Reaction path analysis and sensitivity analysis were performed to determine the important reactions controlling fuel pyrolysis and their impact on species concentrations. This study provides new fundamental knowledge and data for developing detailed kinetic mechanisms.

DEFENCE TECHNOLOGY (2023)

Article Thermodynamics

The influence of ammonia on the laminar burning velocities of methylcyclohexane and toluene: An experimental and kinetic modeling study

Marco Lubrano Lavadera et al.

Summary: Blending ammonia with methylcyclohexane and toluene results in a non-proportional decrease in laminar burning velocity, with a slightly larger impact on toluene. A detailed kinetic model accurately predicts the experimental measurements after minor modifications to the chemistry and shows good agreement with the effect of equivalence ratio and ammonia fraction ranges investigated.

COMBUSTION AND FLAME (2022)

Article Thermodynamics

An experimental and kinetic modeling study of benzene pyrolysis with C2-C3 unsaturated hydrocarbons

Alaa Hamadi et al.

Summary: A combined experimental and kinetic modeling study investigates the influence of added acetylene, ethylene, propylene, and propyne on the reaction schemes of benzene pyrolysis. The study reveals specific reaction pathways and product formation mechanisms in different fuel mixtures.

COMBUSTION AND FLAME (2022)

Article Energy & Fuels

Experimental and chemical kinetic behaviors at the explosion reaction of typical C6 hydrocarbons

Shangyong Zhou et al.

Summary: This research explores the influence of vapor molecular structure of hydrocarbons on vapor explosion. Through experiments and analysis, it reveals that the different molecular structures of hydrocarbons lead to significant differences in the activities of their reaction intermediates, which in turn affect the explosion intensity.
Article Energy & Fuels

The study of combustion characteristics for conventional and renewable Jet fuels at Low-to-intermediate temperatures in a rapid compression Machine

Wei-Cheng Wang et al.

Summary: The combustion characteristics of conventional and renewable jet fuels at low-to-intermediate temperatures were studied, showing that leaner fuel/oxidizer mixture conditions resulted in longer auto-ignition delays. Increasing compression pressures led to shorter auto-ignition delays. The negative temperature coefficient regime was strongly influenced by changes in equivalence ratio. The renewable jet fuel exhibited shorter auto-ignition delays compared to petroleum jet fuels, attributed to its higher hydrogen-to-carbon ratio and lower concentration of cyclic molecules.
Article Chemistry, Applied

Soot formation in n-heptane/air laminar diffusion flames: Effect of toluene addition

Xiaokang Nie et al.

Summary: In this study, the mixture of n-heptane and toluene was used as a surrogate fuel for diesel. The flame morphology, particle size, and soot deposition of three kinds of fuel blends were investigated using various microscopy techniques. The results showed that the addition of toluene promoted the formation of soot and influenced its morphology and structure.

FUEL PROCESSING TECHNOLOGY (2022)

Article Chemistry, Applied

Soot formation in n-heptane/air laminar diffusion flames: Effect of toluene addition

Xiaokang Nie et al.

Summary: This study investigated the particle size, nanostructure, microcrystalline size, and soot deposition morphology of three different fuel laminar diffusion flames of n-heptane and toluene blends using TEM, HRTEM, XRD, and FESEM. Results showed that with an increase in toluene content, flame height increased, temperature decreased, PAH content increased, promoting soot formation with larger particle size. Additionally, the graphitization degree of soot increased with toluene content, leading to larger fringe length and microcrystalline width.

FUEL PROCESSING TECHNOLOGY (2022)

Article Thermodynamics

Experimental and kinetic modeling of the ignition delays of cyclohexane, cyclohexene, and cyclohexadienes: Effect of unsaturation

L. Giarracca et al.

Summary: This study systematically investigated the ignition delays of cyclohexane, cyclohexene, 1,3-cyclohexadiene, and 1,4cyclohexadiene using experiments and kinetic modeling. The results showed that cyclohexene had the highest reactivity, followed by 14-CHD, cyclohexane, and benzene similar to 13-CHD. Pericyclic reactions were found to play a major role in the initial decomposition of the unsaturated fuels.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Article Energy & Fuels

Combustion kinetics of alternative jet fuels, Part-I: Experimental flow reactor study

Patrick Osswald et al.

Summary: A series of three interrelated parts present an experimental and numerical study on detailed combustion chemistry and pollutant formation using a comprehensive collection of technical aviation fuels. The study focuses on the impact of complex chemical fuel composition on intermediate species pool and the relationship between soot precursor concentration and degree of unsaturation, hydrogen content, and naphthalene content.
Article Energy & Fuels

Laminar Flame Speeds and Kinetic Modeling of n-Pentanol and Its Isomers

Qianqian Li et al.

ENERGY & FUELS (2015)

Article Thermodynamics

An experimental and modeling study of the low- and high-temperature oxidation of cyclohexane

Zeynep Serinyel et al.

COMBUSTION AND FLAME (2013)

Article Thermodynamics

Ignition of non-premixed cyclohexane and mono-alkylated cyclohexane flames

Ning Liu et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)

Article Thermodynamics

An experimental and kinetic modeling study of cyclohexane pyrolysis at low pressure

Zhandong Wang et al.

COMBUSTION AND FLAME (2012)

Article Thermodynamics

Propagation and extinction of benzene and alkylated benzene flames

Chunsheng Ji et al.

COMBUSTION AND FLAME (2012)

Article Thermodynamics

An experimental and modeling study of the propagation of cyclohexane and mono-alkylated cyclohexane flames

Chunsheng Ji et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)

Article Chemistry, Physical

Effects of hydrogen addition an cellular instabilities of the spherically expanding propane flames

Chenglong Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Thermodynamics

Laminar burning velocities and Markstein lengths of aromatics at elevated temperature and pressure

RJ Johnston et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)

Article Chemistry, Physical

Experimental and modeling study of the oxidation of cyclohexene

G Dayma et al.

INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2003)