Related references
Note: Only part of the references are listed.Fatigue life extension of additively manufactured Nickel-base 718 alloy by nanostructured surface
Ruslan M. Karimbaev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing
Changhao Pei et al.
ENGINEERING FRACTURE MECHANICS (2022)
Constitutive model for thermomechanical fatigue conditions of an additively manufactured combustor alloy
Thomas Lindstrom et al.
MECHANICS OF MATERIALS (2022)
Anisotropic cyclic plasticity modeling for additively manufactured nickel-based superalloys
Shengzhe Jin et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)
Multi-axial fatigue life assessment of additively manufactured nickel-based superalloys
Shengzhe Jin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Multiscale plasticity behavior and fatigue performance of laser melting multi-layer nickel-based superalloys upon heat treatments
Tinglian Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Cyclic plasticity modeling and fatigue life assessment of the recasting material of a nickel-based superalloy induced by laser manufacturing
Tinglian Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Microstructural characterization and fatigue performance of the recast material induced by laser manufacturing of a nickel-based superalloy
Tinglian Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions
F. Sausto et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions
Changhao Pei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed
Eza Esmaeilizadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects
Klas Solberg et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Characterization of SLM-fabricated Inconel 718 after solid solution and precipitation hardening heat treatments
Wakshum M. Tucho et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 718
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
Changhao Pei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process
Yang Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures
Yan Chong et al.
SCRIPTA MATERIALIA (2019)
Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
Fan Zhang et al.
ACTA MATERIALIA (2018)
Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting
Xing Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
Claire Bruna-Rosso et al.
MATERIALS & DESIGN (2018)
Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance
Michele Calandri et al.
ADVANCED ENGINEERING MATERIALS (2018)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
Wakshum M. Tucho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
Yen-Ling Kuo et al.
SCRIPTA MATERIALIA (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Hot isostatic pressing of IN718 components manufactured by selective laser melting
W. Tillmann et al.
ADDITIVE MANUFACTURING (2017)
Grain Structure Control of Additively Manufactured Metallic Materials
Fuyao Yan et al.
MATERIALS (2017)
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
Zhuqing Wang et al.
ACTA MATERIALIA (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Laves phase in alloy 718 fusion zone - microscopic and calorimetric studies
S. G. K. Manikandan et al.
MATERIALS CHARACTERIZATION (2015)
Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
E. Chlebus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
An overview overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
Nima Shamsaei et al.
ADDITIVE MANUFACTURING (2015)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
TEM, HRTEM, electron holography and electron tomography studies of γ' and γ′ nanoparticles in Inconel 718 superalloy
B. Dubiel et al.
JOURNAL OF MICROSCOPY (2009)
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
G. P. Dinda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Share Paper
