☆ 4.7 Article

Activated carbon fiber derived from wasted coal liquefaction residual for CO2 capture

ENVIRONMENTAL RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Review Biochemistry & Molecular Biology

Insights on Cryogenic Distillation Technology for Simultaneous CO2 and H2S Removal for Sour Gas Fields

Tengku Nur Adibah Tengku Hassan et al.

Summary: With the emerging growth of the world economy and industry, the demand for natural gas has significantly increased. The removal of CO2 and H2S from natural gas is crucial not only to meet market demand, but also due to their corrosive natures and the greenhouse gas effect. Conventional technologies such as absorption, adsorption, and cryogenic separation have been implemented to purify natural gas, with cryogenic technology showing promising potential for bulk CO2 removal. The review comprehensively examines the mechanisms and potential of advanced nonconventional cryogenic separation technologies for processing natural gas streams with high CO2 and H2S content, and highlights the prospects of emerging cryogenic technologies for future commercialization exploitation.

MOLECULES (2022)

Add to Collection

Article Environmental Sciences

Transformation of solid plastic waste to activated carbon fibres for wastewater treatment

Manisha Kumari et al.

Summary: In this study, solid waste plastic was converted into activated carbon fibres through carbonization and chemical activation. The produced activated carbon materials were characterized in terms of morphological structure, composition, thermal stability, and pore structure. The study found that the activation process significantly increased the specific surface area of the carbon materials, making them effective in removing thymol blue dye through adsorption. The study also provided insights into the adsorption isotherm and kinetic measurements of dye removal, as well as the regeneration and reusability of the activated carbon.

CHEMOSPHERE (2022)

Add to Collection

Article Energy & Fuels

Analyzing the potential benefits of trio-amine systems for enhancing the CO2 desorption processes

Xiayi Hu et al.

Summary: This study developed an effective trio-amine blend by combining three conventional amines, which significantly reduced the energy consumption and improved the efficiency of CO2 capture. Detailed analysis of the regeneration mechanism revealed that increasing the proton provider in the blend could lower the energy consumption. Compared to reported amine systems, MEA-1DMA2P-PZ showed potential for industrial-scale CO2 capture.

FUEL (2022)

Add to Collection

Article Engineering, Environmental

Aerosol Emissions of Amine-Based CO2 Absorption System: Effects of Condensation Nuclei and Operating Conditions

Ningtong Yi et al.

Summary: This study investigated the emission characteristics of AMP/MEA in post-combustion CO2 capture and found that aerosol emissions are significantly influenced by condensation nuclei and CO2 concentration within the absorber. An effective control strategy to reduce amine emissions involves nuclei pretreatment, operating optimization, and water scrubbing, leading to decreased MEA and AMP emissions.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Environmental Sciences

Porous structured cotton-based ACF for the adsorption of benzen

Yuanyu Ge et al.

Summary: This study investigated the influence of textural properties of cotton-based activated carbon fiber (CACF) on benzene adsorption, revealing the impact of carbonization temperature, phosphoric acid embedment, and micropore characteristics on the adsorption performance of CACF. The results showed the importance of micropore surface area and volume for benzene adsorption, with a preference for adsorption in micropore walls rather than larger pores. Additionally, it was found that the affinity of CACF for benzene could unexpectedly improve with a decrease in micropore size.

CHEMOSPHERE (2021)

Add to Collection

Article Engineering, Chemical

On optimisation of N2 and CO2-selective hybrid membrane process systems for post-combustion CO2 capture from coal-fired power plants

Natsayi Chiwaye et al.

Summary: The study introduces a superstructure-based optimisation model for the CO2 capture process using N-2-selective and CO2-selective membranes. By automatically selecting membranes for each stage, a hybrid membrane CO2 capture process is achieved, leading to significant reduction in capture cost.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Cellulose acetate-based membranes by interfacial engineering and integration of ZIF-62 glass nanoparticles for CO2 separation

Muhammad Mubashir et al.

Summary: This study evaluates the enhancement of CO2 permeation performance and CO2 plasticization resistance of composite membranes by using non-stoichiometric ZIF-62 MOF glass and cellulose acetate (CA); composite membranes loaded with 8 wt% of ZIF-62 glass showed the highest CO2 permeability and CO2/CH4 ideal selectivity; the findings confirm the potential of ZIF-62 glass materials for the design of composite membranes for CO2 separation at industrial scale.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Pilot-scale combined adsorption columns using activated carbon and zeolite for hazardous trace elements removal from wastewater of entrained-flow coal gasification

Chaoran Wan et al.

Summary: The study proposes an adsorption method combining granular activated carbon (GAC) and zeolite as adsorbents for the removal of hazardous trace elements (HTEs) released during gasification, with promising results from pilot-scale experiments. Results showed that GAC derived from low rank bituminous coal has good adsorption performance for mercury, arsenic, and beryllium. Kinetics studies revealed that experimental data fit Pseudo-second order, and zeolite's ion exchange capacity greatly impacts its adsorption performance.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Chemistry, Physical

Coal tar pitch derived nitrogen-doped carbon dots with adjustable particle size for photocatalytic hydrogen generation

Jinpeng Bai et al.

Summary: Carbon dots (CDs) with tunable size were synthesized from coal tar pitch using a hydrothermal method with NaOH as additive. The obtained CDs demonstrated high crystallinity and the size could be regulated by adjusting the amount of NaOH added. Increasing the size of the CDs from 1.9 to 5.8 nm resulted in a 70% improvement in the solar-to-hydrogen efficiency when Pt was supported on the CDs.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Experimental and simulation study on high-pressure V-L-S cryogenic hybrid network for CO2 capture from highly sour natural gas

Khuram Maqsood et al.

Summary: Cryogenic carbon dioxide capture technologies have shown promise in purifying highly sour natural gas reserves. However, more quantitative experimental data is needed to examine solid and liquid CO2 formation during cryogenic separation, along with the development of an economical and efficient cryogenic CO2 capture technology to reduce energy and hydrocarbon losses.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Chemical

Activated Carbon Fibers Prepared by One-Step Activation with CuCl2 for Highly Efficient Gas Adsorption

Liang Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Selective and enhanced CO2 adsorption on fluorinated activated carbon fibers

Hironori Sugiyama et al.

CHEMICAL PHYSICS LETTERS (2020)

Add to Collection

Article Materials Science, Textiles

Investigation on the Preparation and Adsorption Performance of Bamboo Fiber Based Activated Carbon

Qing Zhang et al.

FIBERS AND POLYMERS (2019)

Add to Collection

Article Energy & Fuels

Effect of thermal extraction on hydro-liquefaction property of residual coal

Zhicai Wang et al.

FUEL (2019)

Add to Collection

Article Energy & Fuels

Effect of solvent and atmosphere on product distribution, hydrogen consumption and coal structural change during preheating stage in direct coal liquefaction

Pan Hao et al.

FUEL (2018)

Add to Collection

Article Engineering, Chemical

Selective adsorption of greenhouse gases on the residual carbon in lignite coal liquefaction

Alyeksandr Ariunaa et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)

Add to Collection

Review Chemistry, Physical

High-throughput computational screening and design of nanoporous materials for methane storage and carbon dioxide capture

Minman Tong et al.

GREEN ENERGY & ENVIRONMENT (2018)

Add to Collection

Article Thermodynamics

Preparation and desulfurization kinetics of activated carbons from semi-coke of coal liquefaction residual

Mengmeng Wu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Engineering, Environmental

Synthesis of porous carbon beads with controllable pore structure for volatile organic compounds removal

Junwen Qi et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Applied

Following the structure and reactivity of Tuncbilek lignite during pyrolysis and hydrogenation

Arzu Kanca et al.

FUEL PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Textiles

Desulfurization properties of modified activated carbon fibers and activated carbon fiber paper

Wei Liu et al.

JOURNAL OF INDUSTRIAL TEXTILES (2015)

Add to Collection

Article Chemistry, Applied

Coconut shell-based microporous carbons for CO2 capture

Aime Serge Ello et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

Hydrogen production by coal gasification in supercritical water with a fluidized bed reactor

Hui Jin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Add to Collection

Article Energy & Fuels

Preparation of carbon microfibers from coal liquefaction residue

Ying Zhou et al.

FUEL (2008)

Add to Collection

Article Engineering, Environmental

Adsorptive removal of direct azo dye from aqueous phase onto coal based sorbents: a kinetic and mechanistic study

SV Mohan et al.

JOURNAL OF HAZARDOUS MATERIALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.