☆ 4.7 Article

MOF@biomass hybrids: Trends on advanced functional materials for adsorption

ENVIRONMENTAL RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Environmental

Recent advances of nanoporous adsorbents for light hydrocarbon (C1 - C3) separation

Chong Yang Chuah et al.

Summary: This review focuses on the recent progress of nanoporous adsorbents developed for light hydrocarbon separation, which is classified into acetylene separation, alkene/alkane separation, and propyne separation. Adsorptive separation is considered a promising technique with lower energy consumption than conventional processes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Eco-friendly and acid-resistant magnetic porous carbon derived from ZIF-67 and corn stalk waste for effective removal of imidacloprid and thiamethoxam from water

Yong Yang et al.

Summary: This study introduces a low-cost magnetic porous carbon adsorbent, ZIF-67/CS@C, designed for efficient removal of neonicotinoids from water. The adsorbent exhibits strong magnetic response, high adsorption capacity, and excellent recyclability, showing great potential for environmental remediation applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Efficient uranium adsorbent with antimicrobial function constructed by grafting amidoxime groups on ZIF-90 via malononitrile intermediate

Douchao Mei et al.

Summary: ZIF-90-AO is an efficient U(VI) adsorbent with high adsorption capacity, good selectivity and regeneration properties, as well as excellent antimicrobial activity.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Anion-induced morphology control of Al-fumarate MOFs via synergetic coordination and hydrogen bond effects for graded dehumidification

Zhenlong Guo et al.

Summary: Aluminum-fumarate based MOFs (AF-MOFs) are a flexible class of metal organic frameworks that can be tuned in terms of morphology and water adsorption properties by varying the anion components. This study demonstrates that the coordination effect between aluminum atoms in MOF units and atoms in anions (such as oxygen and nitrogen) plays a key role in controlling the morphology of AF-MOFs. Water adsorption experiments reveal that AF-MOFs induced by different anions exhibit optimal water absorption performance at different relative pressures.

MICROPOROUS AND MESOPOROUS MATERIALS (2022)

Add to Collection

Article Polymer Science

Co-MOF@MXene hybrids flame retardants for enhancing the fire safety of thermoplastic polyurethanes

Congling Shi et al.

Summary: In this study, Co-MOF@MXene hybrids flame retardants were synthesized and incorporated into TPU, improving the flame retardant performance and char residue of TPU composites.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection

Article Chemistry, Applied

Immobilization of chitosan grafted carboxylic Zr-MOF to porous starch for sulfanilamide adsorption

Xiangze Jia et al.

Summary: A novel hierarchical porous starch-chitosan-UiO-66-COOH composite was developed for the treatment of pharmaceutical bearing sewage. The carboxylic zirconium metal organic framework within the composite showed high affinity for sulfanilamide adsorption, conforming to pseudo-second-order kinetic and Langmuir isothermic models. This composite preserved unique crystallization and thermal properties while offering stable macro-porous structural skeleton for accommodating nanoparticles.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Localized heating driven selective growth of metal-organic frameworks (MOFs) in wood: A novel synthetic strategy for significantly enhancing MOF loadings in wood

Guoshun Huang et al.

Summary: Localized magnetic induction heating (LMIH) is used to drive in-situ MOF growth in wood, resulting in significantly higher MOF loadings in MOF@wood samples, which greatly enhance their adsorption capacity.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Applied

Magnetic NiFe2O4/MWCNTs functionalized cellulose bioadsorbent with enhanced adsorption property and rapid separation

Ru Jiang et al.

Summary: The magnetic NiFe2O4 nanoparticles and multi-walled carbon nanotubes functionalized cellulose composite showed high adsorption capacity for Congo Red in aqueous solution. It can be a promising and recyclable engineering biomaterial for purification and treatment of practical wastewater due to its rapid magnetic separation and high adsorption capacity.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Environmental

Designing C-Fe-O bonded MIL-88B(Fe)/jasmine petal-derived-carbon composite biosensor for the simultaneous detection of dopamine and uric acid

Zhen Qu et al.

Summary: The C-Fe-O bonded MIL-88B(Fe)/carbon composite was developed for enhanced sensitivity and resolution in the simultaneous detection of dopamine (DA) and uric acid (UA). The unique interface between MOF and Fe-JPBC via C-Fe-O bond resulted in improved analyte capture ability, leading to lower limit of detection and well-resolved potential peaks for DA and UA.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

Polymer-assisted modification of metal-organic framework MIL-96 (Al): influence of HPAM concentration on particle size, crystal morphology and removal of harmful environmental pollutant PFOA

Luqman Hakim Mohd Azmi et al.

Summary: A new synthesis method was developed to prepare an aluminum-based metal organic framework with larger particle size and different crystal habits. The modified adsorbent showed superior PFOA adsorption capacity despite slower adsorption kinetics. The strong adsorption of PFOA was attributed to electrostatic bonds between PFOA and amine functionality in the HPAM backbone.

CHEMOSPHERE (2021)

Add to Collection

Article Environmental Sciences

Fabrication of lanthanum methanoate on sucrose-derived biomass carbon nanohybrid for the efficient removal of arsenate from water

Kalimuthu Pandi et al.

Summary: A metal-organic framework (MOF)-like lanthanum-methanoate (LaMe) nanocomplex was designed and synthesized for arsenate (AsO43-) remediation from water, achieving a maximum adsorption density of 0.918 mmol/g. The LaMe@SBC nanohybrid showed great potential as an effective adsorbent for the removal of AsO43- from aqueous environments.

CHEMOSPHERE (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Metal organic framework (MOF)-based micro/nanoscaled materials for heavy metal ions removal: The cutting-edge study on designs, synthesis, and applications

Guo-Rong Xu et al.

Summary: The rapid industrial and agricultural expansion has led to severe heavy metal ion pollution, prompting the urgent need for removal. Advanced materials, such as metal-organic frameworks (MOFs), are being synthesized to overcome challenges in water purification. MOFs show great potential in adsorption due to their highly porous structure and large surface area.

COORDINATION CHEMISTRY REVIEWS (2021)

Add to Collection

Article Engineering, Environmental

In-situ immobilization of ZIF-67 on wood aerogel for effective removal of tetracycline from water

Guanyu Chen et al.

Summary: In this study, a composite adsorbent material, ZIF-67@WA, was successfully fabricated by anchoring ZIF-67 rhombic dodecahedron on wood aerogel to improve the practical application of MOF materials in pollutant removal from wastewater. The composite showed excellent tetracycline adsorption capacity, comparable to previously reported adsorbents, and could be recycled multiple times with minimal secondary contamination. The study suggests that ZIF-67@WA has the potential to effectively remove tetracycline from water due to its superior adsorption performance, compressibility, light weight, and facile separation.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

A biochar supported magnetic metal organic framework for the removal of trivalent antimony

Guocheng Zhu et al.

Summary: A recyclable magnetic MOF nanoparticle phase was prepared using waste biomass-derived biochar to support the treatment of aqueous antimony pollution. The adsorption of trivalent antimony onto the prepared BSMU showed higher sorption capacity under alkaline conditions, with no significant negative effects from coexisting ions. The adsorption followed a pseudo second order kinetics model and Freundlich isotherm model, indicating a fast and efficient absorption process.

CHEMOSPHERE (2021)

Add to Collection

Article Biophysics

Fabrication of in situ ZIF-67 grown on alginate hydrogels and its application for enhancing Cu (II) adsorption from aqueous solutions

Zhiyue Li et al.

Summary: The synthesis of high uniform metal-organic frameworks grown on natural biomass such as sodium alginate presents a challenging project for efficiently removing metal ions from aqueous solutions. By in situ synthesis of ZIF-67 onto ALG hydrogels, a simple and ecofriendly method was established to create ALG@ZIF-67 hydrogels with excellent adsorption capabilities for Cu2+, surpassing pure ALG hydrogels. The methodology followed Langmuir isotherm adsorption model and pseudosecond-order kinetic model, showing high reusability and competitive adsorption capacity compared to other metal ions.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Add to Collection

Article Chemistry, Applied

Pressure-induced phase transition of isoreticular MOFs: Mechanical instability due to ligand buckling

Penghua Ying et al.

Summary: This study investigates the mechanical stability of isoreticular MOFs and their relation with ligands through molecular dynamics simulations and computational methods. It reveals that global instability is driven by local buckling of ligand backbones, leading to the development of a reliable mechanical model for predicting critical transition pressure in various isoreticular MOF materials.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Facile fabrication of HKUST-1 thin films and free-standing MWCNT/HKUST-1 film using a spray-assisted method

Masaru Kubo et al.

Summary: A new spray-assisted process was used to fabricate HKUST-1 thin films in less than 3 minutes. This process involves the formation of nanoparticles from droplets attached to the substrate surface as seed particles, followed by the growth of seed particles to form thin films. Incorporating multi-walled carbon nanotubes into the spraying solution allows for the fabrication of MWCNT/HKUST-1 films, which have consistent porosities with HKUST-1 powders synthesized by conventional and spray-assisted methods.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

A comprehensive review on synthetic approaches for metal-organic frameworks: From traditional solvothermal to greener protocols

Dhiraj Sud et al.

Summary: Metal-organic frameworks (MOFs) are porous materials constructed by inorganic metallic centers and organic ligands, widely used in gas purification and catalysis. Recent years have seen a shift towards green chemistry principles in synthesizing MOFs, driving continuous development in material fabrication.

POLYHEDRON (2021)

Add to Collection

Article Chemistry, Applied

HKUST-1 modified ultrastability cellulose/chitosan composite aerogel for highly efficient removal of methylene blue

Qun Liu et al.

Summary: The novel composite aerogel HKUST-1/CCSA, prepared through covalent cross-linking, vacuum freeze-drying, and solvothermal methods, exhibited high adsorption capacity and good recyclability, making it suitable for applications in pollutant treatment fields.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Materials Science, Paper & Wood

A novel waste paper cellulose-based Cu-MOF hybrid material threaded by PSS for lithium extraction with high adsorption capacity and selectivity

Weibai Bian et al.

Summary: This study utilized waste paper cellulose to prepare a Cu-MOF/PSS hybrid material with high adsorption capacity for Li+ ions. The introduction of PSS greatly improved the material's selectivity and adsorption capacity, but excessive addition led to residual substances and reduced capturing sites for Li+ ions.

CELLULOSE (2021)

Add to Collection

Article Materials Science, Paper & Wood

Facile in situ synthesis of ZIF-67/cellulose hybrid membrane for activating peroxymonosulfate to degrade organic contaminants

Sufeng Zhang et al.

Summary: Cobalt-based metal-organic frameworks have been utilized for degrading organic contaminants, with challenges in separation and recovery; loading onto host materials enhances recyclability; the ZIF-67/cellulose hybrid membrane design resolves separation and recovery issues, demonstrating outstanding degradation and expanding applications in wastewater treatment.

CELLULOSE (2021)

Add to Collection

Review Environmental Sciences

Biomass-derived porous carbonaceous materials and their composites as adsorbents for cationic and anionic dyes: A review

Mohammad M. Hassan et al.

Summary: Textile dyes in effluent pose a challenge due to their intense color, but carbonaceous adsorbents produced from biomass show high dye-binding capacity. The pore volume and functional groups of adsorbents are crucial factors in achieving efficient dye removal.

CHEMOSPHERE (2021)

Add to Collection

Review Environmental Sciences

Engineering conversion of Asteraceae plants into biochars for exploring potential applications: A review

Duyen Thi Cam Nguyen et al.

Summary: Asteraceae is one of the most globally prevalent and cultivated plant families, but the agricultural wastes from these crops have adverse impacts on the environment. This study aims to explore the biomass potentials of Asteraceae and their conversion into biochars, as well as the utilization of Asteraceae biochars in wastewater treatment. Efforts were made to analyze production costs and discuss the challenges and prospects of Asteraceae-based biochars.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

MOF-on-MOF hybrids: Synthesis and applications

Chao Liu et al.

Summary: Metal-organic frameworks (MOFs) are promising porous crystalline materials with diverse applications, and the study of MOF-on-MOF hybrids is relatively lacking. This review provides a comprehensive summary on achievements, synthetic strategies, structural diversity, and future directions of MOF-on-MOF hybrids, filling the gap in existing research.

COORDINATION CHEMISTRY REVIEWS (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Preparation of iron-based metal-organic framework @cellulose aerogel by in situ growth method and its application to dye adsorption

Cong Huang et al.

Summary: Two metal-organic framework materials were loaded on cellulose aerogel by in situ growing method for dye adsorption, showing excellent adsorption capacity. The recovered aerogels maintained comparable adsorption performance even after five cycles of use.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Porphyrinic zirconium metal-organic frameworks: Synthesis and applications for adsorption/catalysis

Kwangsun Yu et al.

Summary: Zr-based porphyrinic MOFs with isolated porphyrin units embedded in a rigid structure exhibit excellent textural properties and high stability. They can undergo diverse functionalization or guest encapsulation and are widely used in adsorption, sensors, and catalysis applications.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Adsorption of metals from oil sands process water (OSPW) under natural pH by sludge-based Biochar/Chitosan composite

Junying Song et al.

Summary: In this study, a sludge-based biochar/chitosan composite was successfully prepared and showed excellent removal efficiency for metals (Cr, Cu, Se and Pb) in oil sands process water (OSPW). The enhanced removal ability of the composite was attributed to its improved specific surface area, pore volume, and functional groups such as NH2, -OH and oxygen containing groups. The adsorption process was best described by the Freundlich model, pseudo second order, and intraparticle diffusion kinetic models, indicating that chemical adsorption played a dominant role in the removal process.

WATER RESEARCH (2021)

Add to Collection

Review Environmental Sciences

Recent advances and challenges on removal and recycling of phosphate from wastewater using biomass-derived adsorbents

Gao-Jie Jiao et al.

Summary: This review summarizes the recent research on the removal and recycling of phosphate from wastewater using biomass-derived adsorbents, discussing the design strategies, preparation methods, adsorption performances, and mechanisms of these adsorbents. Challenges still exist in the development and industrial application of biomass-derived adsorbents, which require more attention in future research endeavors.

CHEMOSPHERE (2021)

Add to Collection

Review Environmental Sciences

A review of metal organic framework (MOFs)-based materials for antibiotics removal via adsorption and photocatalysis

Chunyan Du et al.

Summary: Antibiotic abuse has caused water pollution and health issues; adsorption and photodegradation are effective water treatment methods, with MOFs being excellent adsorbents and photocatalysts.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

Room-temperature synthesis of MIL-100(Fe) and its adsorption performance for fluoride removal from water

Weifeng Li et al.

Summary: A novel strategy for room-temperature synthesis of MIL-100(Fe) using an organic amine as a deprotonating agent was proposed, and the resulting solid product, R-MIL-100(Fe), was characterized through various methods. The study found that R-MIL-100(Fe) had a high fluoride adsorption capacity, with the adsorption process belonging to surface adsorption and intraparticle diffusion. Additionally, R-MIL-100(Fe) exhibited excellent fluoride adsorption performance in a pH range of 4-10.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Review Environmental Sciences

A review on the use of lignocellulosic materials for arsenic adsorption

Luisa Cardoso Maia et al.

Summary: The use of lignocellulosic materials as bioadsorbents for arsenic removal shows promise, but commercial applications are still lacking. Structural modification to enhance adsorption capacity and selectivity is crucial, alongside the need for further investigation on interaction nature and cost-effectiveness.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Review Engineering, Environmental

Development of fruit waste derived bio-adsorbents for wastewater treatment: A review

Nadeem Hussain Solangi et al.

Summary: Hazardous contamination of water is a major obstacle in providing usable and drinkable water to the world. Innovative, economic, renewable and environmentally friendly technologies are urgently needed for wastewater treatment. Adsorption is seen as a promising approach due to its efficiency, and bioadsorbents derived from fruit waste sources offer a potential solution for wastewater treatment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorptive removal and visible-light photocatalytic degradation of large cationic and anionic dyes induced by air-bubbles in the presence of a magnetic porphyrinic metal-organic framework (Fe3O4@SiO2@PCN-222 (Fe))

Roya Hariri et al.

Summary: This study presents a magnetic recyclable Fe3O4@SiO2@PCN-222(Fe) photocatalyst based on a Zr-porphyrin metal-organic framework for efficient dye removal from wastewater. The synthesized MOF demonstrated effective visible-light photocatalytic activity for degrading large dyes, and various analytical methods were used to characterize the catalyst. The impact of metalloporphyrin on degradation efficiency was investigated, and a degradation mechanism was proposed.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Add to Collection

Article Engineering, Chemical

Fabrication of MIL-53(Al) based composites from biomass activated carbon (AC) for efficient p-nitrophenol adsorption from aqueous solution

Lihua Qi et al.

Summary: This study developed a novel MIL-53(Al)@AC-x composite with high adsorption capacity for phenolic wastewater, outperforming traditional MIL-53(Al) and activated carbon. The adsorption performance of the composite increased with the AC loading, reaching a high maximum adsorption capacity.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Environmental Sciences

Adsorptive removal of crude petroleum oil from water using floating pinewood biochar decorated with coconut oil-derived fatty acids

Ranjit Gurav et al.

Summary: The study focused on the adsorptive removal of crude petroleum oil from water surface using coconut oil-modified pinewood biochar, which showed excellent adsorption efficiency and hydrophobicity. Experimental data simulation indicated that the modified biochar generated at 700 degrees C exhibited the best fit with pseudo-first-order kinetics and Langmuir isotherm model, suggesting that the adsorption process was mainly driven by surface hydrophobic interactions.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Chemistry, Analytical

A novel fluorescent strategy based on double modifications of metal organic framework material CAU-10-NH2 for low background and high sensitivity determination of H2S

Wenpeng Gong et al.

Summary: A novel fluorescent strategy based on double modifications of metal organic framework material was proposed for the determination of hydrogen sulfide, demonstrating low background and high sensitivity. After optimization, the strategy showed a wide linear range and low detection limit, with satisfactory assay results in serum samples and Pearl river water.

TALANTA (2021)

Add to Collection

Article Engineering, Environmental

Microwave-assisted synthesis of NH2-MIL-125(Ti) for the solar photocatalytic degradation of aqueous emerging pollutants in batch and continuous tests

Rafael R. Solis et al.

Summary: NH2-MIL-125(Ti) MOFs were prepared by microwave-assisted synthesis under different conditions and used as photocatalysts for the breakdown of pharmaceuticals in water. The MOF prepared at 200 degrees C under 15 min microwave radiation exhibited the best crystalline structure and porosity, with good visible light absorption properties, and showed the highest performance in the removal of diclofenac.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Solvothermal growth of the bimetal organic framework (NiFe-MOF) on sugarcane bagasse hydrochar for the removal of dye and antibiotic

Farahin Mohd Jais et al.

Summary: In this study, a NiFe-MOF@AHC composite was prepared using a solvothermal method and optimized for high adsorption removal of large-sized pollutants. The optimized composite showed a dual three-dimensional structure with high thermal stability and demonstrated fast removal rates for crystal violet dye and tetracycline. The dominant mechanisms for dye removal were hydrogen bonding, pi-pi interactions, surface complexation, and acid-base interactions. Additionally, the regeneration studies showed that the composite was stable and recyclable after multiple cycles.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Comparison between conventional solvothermal and aqueous solution-based production of UiO-66-NH2: Life cycle assessment, techno-economic assessment, and implications for CO2 capture and storage

Hongxi Luo et al.

Summary: Metal-organic frameworks (MOFs) are a promising new class of materials, with potential applications in various fields. Aqueous synthesis of MOFs eliminates organic solvents, reducing environmental burdens and costs associated with production. This study highlights the significant environmental and economic benefits of using aqueous-based methods for producing MOFs.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Review Electrochemistry

3D Hierarchical Carbon-Rich Micro-/Nanomaterials for Energy Storage and Catalysis

Zhixiao Xu et al.

Summary: Growing concerns about climate change and energy shortages have driven the development of clean energy devices such as batteries, supercapacitors, fuel cells, and solar water splitting. Among potential materials, 3D hierarchical carbon-rich micro/nanomaterials have garnered attention for their ability to enhance energy storage and catalysis. This review highlights synthetic strategies, formation mechanisms, structural diversities, and electrochemical applications of 3D HCMNs, providing insights for the design and exploration of hierarchical nanomaterials beyond carbon-based species.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Add to Collection

Article Engineering, Environmental

Investigation of the MOF adsorbents and the gas adsorptive separation mechanisms

Mohammadreza Fakhraei Ghazvini et al.

Summary: Metal-Organic Frameworks (MOFs) have been rapidly developing in the field of adsorption studies due to their high pore volume and high porosity, and the adsorption-based separation mechanisms are being investigated. The size exclusion, difference in affinity, and adsorption rate play key roles in governing adsorption-based separation, and recent advancements in MOFs' chemistry and structural characteristics have been studied. Furthermore, the applications of MOFs in carbon dioxide capture and methane storage have been explored to reveal the high potential of MOFs in separation technologies.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Materials Science, Paper & Wood

Zeolitic imidazolate framework-67 functionalized cellulose hybrid aerogel: an environmentally friendly candidate for dye removal

Wenqi Song et al.

CELLULOSE (2020)

Add to Collection

Article Engineering, Environmental

A chitosan-graphene oxide/ZIF foam with anti-biofouling ability for uranium recovery from seawater

Xuejie Guo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Adsorption of propane and propylene on M-MOF-74 (M = Cu, Co): Equilibrium and kinetic study

Hassan Abedini et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Removal of Hg2+ heavy metal ion using a highly stable mesoporous porphyrinic zirconium metal-organic framework

Zahra Seyfi Hasankola et al.

INORGANICA CHIMICA ACTA (2020)

Add to Collection

Article Environmental Sciences

Investigation of a modified metal-organic framework UiO-66 with nanoscale zero-valent iron for removal of uranium (VI) from aqueous solution

Fan Yang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Biomass@MOF-Derived Carbon Aerogels with a Hierarchically Structured Surface for Treating Organic Pollutants

Yang Zhao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Magnetic metal-organic framework composites for environmental monitoring and remediation

Benjamin Edem Meteku et al.

COORDINATION CHEMISTRY REVIEWS (2020)

Add to Collection

Article Environmental Sciences

Ice- and MOF-templated porous carbonaceous monoliths for adsorptive removal of dyes in water with easy recycling

Qingshan Fu et al.

ENVIRONMENTAL RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Insights into the Adsorption of VOCs on a Cobalt-Adeninate Metal-Organic Framework (Bio-MOF-11)

Ruofei Chen et al.

ACS OMEGA (2020)

Add to Collection

Review Agricultural Engineering

A critical review of the production and advanced utilization of biochar via selective pyrolysis of lignocellulosic biomass

Yunchao Li et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Soft foam-like UiO-66/Polydopamine/Bacterial cellulose composite for the removal of aspirin and tetracycline hydrochloride

Jian Cui et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Environmental Sciences

Design and synthesis of biopolymer-derived porous graphitic carbon covered iron-organic frameworks for depollution of arsenic from waters

Kalimuthu Pandi et al.

CHEMOSPHERE (2020)

Add to Collection

Article Chemistry, Physical

Effective strategy to fabricate ZIF-8@ZIF-8/polyacrylonitrile nanofibers with high loading efficiency and improved removing of Cr(VI)

Xu Yang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ice-templated porous polymer/UiO-66 monolith for Congo Red adsorptive removal

Lang Wen et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Activated carbon/MOFs composite: AC/NH2-MIL-101(Cr), synthesis and application in high performance adsorption of p-nitrophenol

Abdullah M. Aldawsari et al.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Development of biological macroalgae lignins using copper based metal-organic framework for selective adsorption of cationic dye from mixed dyes

Reda M. Abdelhameed et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Physical

Facile synthesis of zirconium-organic frameworks@biomass-derived porous graphitic nanocomposites: Arsenic adsorption performance and mechanism

Kalimuthu Pandi et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Chemistry, Physical

Encapsulation of extremely stable polyaniline onto Bio-MOF: Photo-activated antimicrobial and depletion of ciprofloxacin from aqueous solutions

Kamel Shoueir et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Applied

Polysaccharide templated biomimetic growth of hierarchically porous metal-organic frameworks

Nisrine Hammi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Magnetic carnosine-based metal-organic framework nanoparticles: fabrication, characterization and application as arsenic adsorbent

Maryam Keykhaee et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorption of Lead Ions by a Green AC/HKUST-1 Nanocomposite

Paria Soleimani Abhari et al.

NANOMATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Production of microporous Cu-doped BTC (Cu-BTC) metal-organic framework composite materials, superior adsorbents for the removal of methylene blue (Basic Blue 9)

Muhammet S. A. Eren et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Removal of lead ions from water using thiophene-functionalized metal-organic frameworks

Alissa R. Geisse et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Targeted classification of metal-organic frameworks in the Cambridge structural database (CSD)

Peyman Z. Moghadam et al.

CHEMICAL SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Carbonaceous material obtained from bark biomass as adsorbent of phenolic compounds from aqueous solutions

Mohamed Abatal et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Applied

Fabrication of metal-organic frameworks@cellulose aerogels composite materials for removal of heavy metal ions in water

Chao Lei et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Chemistry, Applied

Lightweight and porous cellulose-based foams with high loadings of zeolitic imidazolate frameworks-8 for adsorption applications

Shanshan Ma et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Chemistry, Applied

Enhanced selectively removal uranyl ions from aqueous solution by Fe@ZIF-8

Xiaomei Zhang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Highly efficient SO3Ag-functionalized MIL-101(Cr) for adsorptive desulfurization of the gas stream: Experimental and DFT study

Alimohammad Pourreza et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

CoOx/MoOy-anchored multi-wrinkled biomass carbon as a promising material for rapidly selective methyl blue removal

Lu Yang et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Bio-based magnetic metal-organic framework nanocomposite: Ultrasound-assisted synthesis and pollutant (heavy metal and dye) removal from aqueous media

Niyaz Mohammad Mahmoodi et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Applied

Extraordinarily selective adsorption of CO2 over N2 in a polyethylene-imine-impregnated NU-1000 material

Jo Hong Kang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Add to Collection

Review Nanoscience & Nanotechnology

Hierarchical Metal-Organic Frameworks with Macroporosity: Synthesis, Achievements, and Challenges

Huan V. Doan et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Article Engineering, Environmental

Use of metal-organic framework to remove chromium (VI) from aqueous solutions

Zahra Noraee et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Lightweight UiO-66/cellulose aerogels constructed through self-crosslinking strategy for adsorption applications

Zhongguo Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Design of L-Cysteine Functionalized UiO-66 MOFs for Selective Adsorption of Hg(II) in Aqueous Medium

Minghu Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Applied

Carbohydrates-rich corncobs supported metal-organic frameworks as versatile biosorbents for dye removal and microbial inactivation

Chao Duan et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Chemistry, Applied

Fabrication of novel chitosan-g-PNVCL/ZIF-8 composite nanofibers for adsorption of Cr(VI), As(V) and phenol in a single and ternary systems

Ehsan Bahmani et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Environmental Sciences

Adsorption of methylene blue and Cd(II) onto maleylated modified hydrochar from water

Bing Li et al.

ENVIRONMENTAL POLLUTION (2019)

Add to Collection

Article Engineering, Chemical

Efficient and selective removal of congo red by mesoporous amino -modified MIL-101(Cr) nanoadsorbents

Yuanming Tan et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced hydrothermal stability of Cu MOF by post synthetic modification with amino acids

Reetu Rani et al.

VACUUM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Shapeable Fibrous Aerogels of Metal-Organic-Frameworks Templated with Nanocellulose for Rapid and Large-Capacity Adsorption

Luting Zhu et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Physical

MOF-derived Cu-Pd/nanoporous carbon composite as an efficient catalyst for hydrogen evolution reaction: A comparison between hydrothermal and electrochemical synthesis

Sakineh Mandegarzad et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Applied

Synthesis of novel cellulose- based antibacterial composites of Ag nanoparticles@ metal-organic frameworks@ carboxymethylated fibers

Chao Duan et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Materials Science, Paper & Wood

Functionalization of cellulose fiber by in situ growth of zeolitic imidazolate framework-8 (ZIF-8) nanocrystals for preparing a cellulose-based air filter with gas adsorption ability

Zhiping Su et al.

CELLULOSE (2018)

Add to Collection

Article Engineering, Multidisciplinary

A GO-CS@MOF [Zn(BDC)(DMF)] material for the adsorption of chromium (VI) ions from aqueous solution

Melvin S. Samuel et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Facilitating Laboratory Research Experience Using Reticular Chemistry

Steven J. Lyle et al.

JOURNAL OF CHEMICAL EDUCATION (2018)

Add to Collection

Article Engineering, Chemical

On the direct synthesis of Cu(BDC) MOF nanosheets and their performance in mixed matrix membranes

Meera Shete et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Review Green & Sustainable Science & Technology

A review on utilization of wood biomass as a sustainable precursor for activated carbon production and application

Mohammed Danish et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Engineering, Chemical

Highly selective adsorption separation of light hydrocarbons with a porphyrinic zirconium metal-organic framework PCN-224

Renfeng Shi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorption of toluene with water on zeolitic imidazolate framework-8/graphene oxide hybrid nanocomposites in a humid atmosphere

Fuchen Chu et al.

RSC ADVANCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity

Yipei Chen et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Energy & Fuels

Adsorption characterization and CO2 breakthrough of MWCNT/Mg-MOF-74 and MWCNT/MIL-100(Fe) composites

Rached Ben-Mansour et al.

INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Applied

Cu-BTC metal-organic framework natural fabric composites for fuel purification

Reda M. Abdelhameed et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

One-pot synthesis of binary metal organic frameworks (HKUST-1 and UiO-66) for enhanced adsorptive removal of water contaminants

Muhammad Rizwan Azhar et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Metal-organic frameworks: Challenges and opportunities for ion-exchange/sorption applications

Pawan Kumar et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Adsorption and separation of hydrocarbons by the metal organic framework MIL-101(Cr)

Hichem Belarbi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Add to Collection

Article Chemistry, Physical

Development of a Cambridge Structural Database Subset: A Collection of Metal-Organic Frameworks for Past, Present, and Future

Peyman Z. Moghadam et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Three-dimensional macro-structures of two-dimensional nanomaterials

Khurram Shehzad et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Engineering, Chemical

A Facile Post-Synthetic Modification Method To Improve Hydrothermal Stability and CO2 Selectivity of CuBTC Metal-Organic Framework

Nadeen Al-Janabi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)

Add to Collection

Article Chemistry, Physical

Removal of BTEX by using a surfactant - Bio originated composite

H. Shakeri et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Challenges and recent advances in MOF-polymer composite membranes for gas separation

Yuanyuan Zhang et al.

INORGANIC CHEMISTRY FRONTIERS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Porous and chelated nanostructured multifunctional materials: recoverable and reusable sorbents for extraction of metal ions and catalysts for diverse organic reactions

Parul Pant et al.

JOURNAL OF NANOSTRUCTURE IN CHEMISTRY (2016)

Add to Collection

Article Engineering, Environmental

Separation of SF6 from SF6/N2 mixture using metal-organic framework MIL-100(Fe) granule

Pil-Joong Kim et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Chemistry, Physical

MIL-68 (In) nano-rods for the removal of Congo red dye from aqueous solution

Li-Na Jin et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Water Stability and Adsorption in Metal-Organic Frameworks

Nicholas C. Burtch et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Water Adsorption in Porous Metal-Organic Frameworks and Related Materials

Hiroyasu Furukawa et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Applied

The effect of pore shape on hydrocarbon selectivity on UiO-66(Zr), HKUST-1 and MIL-125(Ti) metal organic frameworks: Insights from molecular simulations and chromatography

Naseem A. Ramsahye et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Shape-selected colloidal MOF crystals for aqueous use

Melinda Sindoro et al.

CHEMICAL COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Physical

Structures, Sorption Characteristics, and Nonlinear Optical Properties of a New Series of Highly Stable Aluminum MOFs

Helge Reinsch et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Systematic modulation and enhancement of CO2 : N2 selectivity and water stability in an isoreticular series of bio-MOF-11 analogues

Tao Li et al.

CHEMICAL SCIENCE (2013)

Add to Collection

Article Green & Sustainable Science & Technology

Utilization of agro-industrial waste Jatropha curcas pods as an activated carbon for the adsorption of reactive dye Remazol Brilliant Blue R (RBBR)

Palanivel Sathishkumar et al.

JOURNAL OF CLEANER PRODUCTION (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing Water Stability of Metal-Organic Frameworks via Phosphonate Monoester Linkers

Jared M. Taylor et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Add to Collection

Article Chemistry, Applied

Propane/propylene separation by adsorption using shaped copper trimesate MOF

M. G. Plaza et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2012)

Add to Collection

Article Engineering, Environmental

Adsorptive removal of methyl orange and methylene blue from aqueous solution with a metal-organic framework material, iron terephthalate (MOF-235)

Enamul Haque et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Water Stability of Microporous Coordination Polymers and the Adsorption of Pharmaceuticals from Water

Katie A. Cychosz et al.

LANGMUIR (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.