☆ 4.7 Article

Vibration suppression of ball-screw drive system based on flexible dynamics model

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Artificial Intelligence

Boosting arithmetic optimization algorithm by sine cosine algorithm and levy flight distribution for solving engineering optimization problems

Laith Abualigah et al.

Summary: This study presents an enhanced arithmetic optimization algorithm (AOA) called AOASC, which utilizes operators from the sine-cosine algorithm to improve the exploitation ability of AOA. The developed method shows improved convergence rate and solution quality.

NEURAL COMPUTING & APPLICATIONS (2022)

Add to Collection

Article Chemistry, Analytical

Payload Identification and Gravity/Inertial Compensation for Six-Dimensional Force/Torque Sensor with a Fast and Robust Trajectory Design Approach

Jinjun Duan et al.

Summary: This paper proposes a rapid identification method for robot payload based on excitation trajectory. By using a self-developed multi-dimensional force sensor to directly measure external contact force, the accuracy and efficiency of force control are improved.

SENSORS (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Discrete fractional-order Caputo method to overcome trapping in local optima: Manta Ray Foraging Optimizer as a case study

Dalia Yousri et al.

Summary: Enhancing exploration and exploitation in metaheuristic optimization algorithms is crucial to avoiding local optima. A novel variant of the Manta ray foraging optimizer using fractional calculus has been proposed in this work to improve exploitation of optimal solutions and prevent premature convergence. The proposed algorithm demonstrates superior performance in various optimization problems and image segmentation tasks compared to state-of-the-art algorithms.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Add to Collection

Article Remote Sensing

Modified aquila optimizer for forecasting oil production

Mohammed A. A. Al-qaness et al.

Summary: This study optimizes the parameters of the ANFIS model using a modified Aquila Optimizer with Opposition-Based learning technique to improve the accuracy of oil production estimation. The proposed AOOBL-ANFIS model outperforms the classic ANFIS model and other compared models, as validated by real-world oil production datasets and various performance metrics.

GEO-SPATIAL INFORMATION SCIENCE (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Hybridizing salp swarm algorithm with particle swarm optimization algorithm for recent optimization functions

Narinder Singh et al.

Summary: The salp swarm algorithm (SSA) is a meta-heuristic algorithm with fast search speed. However, not all nature-inspired methods are suitable for every application and function. Therefore, researchers have developed hybrid approaches to improve exploration and exploitation. In this study, a newly hybrid approach called hybrid salp swarm algorithm with particle swarm optimization (PSO) was developed for searching optimal solutions of standard and engineering functions. The hybrid variant integrates the advantages of SSA and PSO to overcome disadvantages such as local optima trapping and unbalanced exploitation. The proposed technique combines the velocity phase of PSO with the salp swarm approach to prevent premature convergence and improve exploitation tendencies. Simulation results show that the proposed hybrid approach provides competitive and often superior results compared to other algorithms.

EVOLUTIONARY INTELLIGENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Suppression of robot vibrations using input shaping and learning-based structural models

Michael Newman et al.

Summary: The article introduces a vibration avoidance technique based on input shaping combined with a learning-based structural dynamic model for industrial robots used in manufacturing processes. A theoretical dynamic model and an artificial neural network are developed to predict the natural frequency of the system at any pose in the workspace, with transfer learning techniques used to extend the network. Experimental results show a significant reduction of residual vibrations during aggressive motions of the robot.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Hybrid model for the analysis of the modal properties of a ball screw vibration system

Qin Wu et al.

Summary: A hybrid modeling method is proposed to study the dynamic behavior of ball screw feed systems, establishing various vibration models to predict the system's vibration characteristics accurately. This approach proves effective in predicting natural frequencies and modal shapes of the ball screw systems with carriage positions, providing a basis for further study and vibration controller design.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Vibration control of industrial robot arms by multi-mode time-varying input shaping

Dan Kielsholm Thomsen et al.

Summary: This paper presents a practical set of new tools for identifying and mapping the natural frequencies and damping ratios of dominant vibration modes of a robot arm, reducing residual vibrations effectively. The combination of new methods yields an efficient vibration suppression with great robustness and low-cost computation, reducing residual vibration of the robot manipulator up to 90%.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Computer Science, Information Systems

Improving content popularity prediction with k-means clustering and deep-belief networks

Zahra Movahedi Nia et al.

Summary: This paper introduces an improved method for predicting content popularity in the early stage, using k-means clustering and DBN models, which significantly improves performance and outperforms other methods in reducing errors.

MULTIMEDIA TOOLS AND APPLICATIONS (2021)

Add to Collection

Article Automation & Control Systems

Vibration Reduction of Flexible Rope-Driven Mobile Robot for Safe Facade Operation

Myoungjae Seo et al.

Summary: This article explores the use of a dual ascender robot for facade operations, presenting two suggestions for safe operations. By modeling a flexible nylon fiber rope, vibration control can be achieved through conversion. Additionally, input shaping control is utilized to reduce vibrations and shorten settling time effectively.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2021)

Add to Collection

Article Automation & Control Systems

Drive axis controller optimization of production machines based on dynamic models

Vojtech Halamka et al.

Summary: The paper presents a methodology for optimizing the parameters of cascade control of machine tool axis drives, involving the identification of axis dynamic model, controller model, selection of optimization objective functions, and constraint conditions optimization. The optimization of controllers is tuned by simulation and implemented on a real machine tool linear axis with different loads, demonstrating the advantage of simultaneous tuning of all parameters using optimization methods.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Modified whale optimization algorithm for solving unrelated parallel machine scheduling problems

Mohammed A. A. Al-qaness et al.

Summary: In this study, a new method is proposed to address the unrelated parallel machine scheduling problem with sequence-dependent and machine-dependent setup times, using the features of the whale optimization algorithm and the firefly algorithm. The FA operators are employed to improve the exploitation ability of the WOA, and the quality of the proposed WOAFA method is tested against other well-known meta-heuristic algorithms.

SOFT COMPUTING (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Dynamic Identification of Industrial Robot Based on Nonlinear Friction Model and LS-SOS Algorithm

Jianwei Dong et al.

Summary: This article presents a parameter identification method based on a nonlinear friction model and least squares algorithm, successfully estimating the inertial and friction parameters of the robot through specially designed trajectories and algorithms. Experimental results show that the proposed method has a small root-mean-square error in estimating joint torques.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Review Automation & Control Systems

A review on vibration analysis and control of machine tool feed drive systems

Haojin Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Automation & Control Systems

Condition Monitoring of Ball-Screw Drives Based on Frequency Shift

Tiandong Xi et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Add to Collection

Article Automation & Control Systems

Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares method

Chan-Young Lee et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

T-S fuzzy systems optimization identification based on FCM and PSO

Yaxue Ren et al.

EURASIP JOURNAL ON ADVANCES IN SIGNAL PROCESSING (2020)

Add to Collection

Article Computer Science, Information Systems

Improved PSO Algorithm Integrated With Opposition-Based Learning and Tentative Perception in Networked Data Centres

Zhou Zhou et al.

IEEE ACCESS (2020)

Add to Collection

Article Automation & Control Systems

Efficient PID Tracking Control of Robotic Manipulators Driven by Compliant Actuators

Yongping Pan et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2019)

Add to Collection

Article Electrochemistry

A comparative study of global optimization methods for parameter identification of different equivalent circuit models for Li-ion batteries

Xin Lai et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Engineering, Mechanical

Comparison of various input shaping methods in rest-to-rest motion of the end-effecter of a rigid-flexible robotic system with large deformations capability

Hamid Ghorbani et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Thermodynamics

Rigid-flexible coupling dynamic model of a flexible planar parallel robot for modal characteristics research

Lianchao Sheng et al.

ADVANCES IN MECHANICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Research on flexible dynamics of a 6-DOF industrial robot and residual vibration control with a pre-adaptive input shaper

Tie Zhang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Acoustics

Active vibration control of motorized spindle based on mixed H∞/Kalman filter robust state feedback control

Ye He et al.

JOURNAL OF VIBRATION AND CONTROL (2019)

Add to Collection

Article Engineering, Aerospace

Vibration control of gyroelastic spacecraft using input shaping and angular momentum devices

Shiyuan Jia et al.

ACTA ASTRONAUTICA (2019)

Add to Collection

Article Computer Science, Hardware & Architecture

Design, simulation, comparison and evaluation of parameter identification methods for an industrial robot

Claudio Urrea et al.

COMPUTERS & ELECTRICAL ENGINEERING (2018)

Add to Collection

Article Automation & Control Systems

An improved instrumental variable method for industrial robot model identification

M. Brunot et al.

CONTROL ENGINEERING PRACTICE (2018)

Add to Collection

Article Engineering, Mechanical

Identification and compensation of friction for a novel two-axis differential micro-feed system

Fuxin Du et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Automation & Control Systems

A Dynamic Parameter Identification Method for Flexible Joints Based on Adaptive Control

Hongzhe Jin et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2018)

Add to Collection

Article Automation & Control Systems

Simplified input-output inversion control of a double pendulum overhead crane for residual oscillations reduction

Marco Giacomelli et al.

MECHATRONICS (2018)

Add to Collection

Article Engineering, Mechanical

Hybrid dynamic modeling and analysis of a ball-screw-drive spindle system

Lei Zhang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Automation & Control Systems

A revised Durbin-Wu-Hausman test for industrial robot identification

Alexandre Janot et al.

CONTROL ENGINEERING PRACTICE (2016)

Add to Collection

Article Engineering, Manufacturing

Method for identifying feed-drive system dynamic properties using a motor current

Xing Liu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

Add to Collection

Article Thermodynamics

An improved recursive least square-based adaptive input shaping for zero residual vibration control of flexible system

Zhongyi Chu et al.

ADVANCES IN MECHANICAL ENGINEERING (2016)

Add to Collection

Article Engineering, Industrial

Contour error control of CNC machine tools with vibration avoidance

Y. Altintas et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Manufacturing

Expedient modeling of ball screw feed drives

S. Frey et al.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2012)

Add to Collection

Article Computer Science, Artificial Intelligence

Dynamic identification of Staubli RX-60 robot using PSO and LS methods

Zafer Bingul et al.

EXPERT SYSTEMS WITH APPLICATIONS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.