Multiple combustion modes switching to realize full-load efficient energy conversion of n-butanol/diesel dual direct injection (DI2) engine

The dual direct injection (DI2) engine system involves the in-cylinder co-direct injections of two fuels with the potential to address the operation limitations of traditional dual-fuel engines at part load conditions. However, for the DI2 engine, its optimal fueling strategies and combustion modes under different load conditions are still unknown. By selecting n-butanol and diesel as the test fuels, this study devotes to identifying the optimal combustion schemes of the DI2 engine at different loads using three-dimensional engine simulation combined with an improved genetic algorithm, and further revealing its optimal fuel stratification and auto-ignition characteristics. The results showed that for low load, the optimal DI2 strategy is to pre-inject a low proportion of diesel (near 20%) into the cylinder early in the compression stroke and then introduce n-butanol into this diesel atmosphere. On the contrary, the fuel injection sequence is reversed at mid load, in which n-butanol is first injected into the combustion chamber to form a partially premixed n-butanol/air mixture, followed by a late diesel injection at -50 to -20 degrees CA after top dead center (TDC). As for the high-load operation, n-butanol is still preferred to be partially premixed, but the diesel injection event is delayed until after TDC. The main factors driving the ignition under low load are the fuel reactivity and temperature, while at mid load the ignition is primarily initiated by fuel reactivity, however, the effect of temperature is highlighted under high load.

Automated summary

This study focuses on identifying the optimal combustion schemes of the dual direct injection (DI2) engine system at different load conditions using n-butanol and diesel as test fuels. Through three-dimensional engine simulation combined with an improved genetic algorithm, the study reveals the optimal fuel stratification and auto-ignition characteristics. The results show that the optimal DI2 strategy varies with load conditions, and factors such as fuel reactivity and temperature play different roles in ignition.