☆ 4.7 Article

Facile and Cheap Carbonized Cotton Cloth Interlayer Endows Lithium-Sulfur Batteries with High Performance in All Climates

ENERGY & FUELS (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Challenges and advances in wide-temperature rechargeable lithium batteries

Yang Feng et al.

Summary: This article discusses the key obstacles to developing wide-temperature RLBs, introduces the latest research progress in addressing challenges at extreme temperatures, and reviews the operating mechanism and design strategies of electrolyte and electrode materials for RLBs working within a wide-temperature range.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Review Energy & Fuels

Overview of the Latest Developments and Perspectives about Noncarbon Sulfur Host Materials for High Performance Lithium-Sulfur Batteries

Hongjing Gao et al.

Summary: Lithium-sulfur (Li-S) batteries have great potential in environmentally friendly energy storage systems, but their commercialization is hindered by issues such as poor electrical conductivity, volume expansion, and shuttle effect. Introducing polar materials can improve cycle stability and suppress shuttle effect. This review discusses commonly used polar materials and provides insights into the development prospects of batteries.

ENERGY & FUELS (2022)

Add to Collection

Article Engineering, Environmental

Sub-zero temperature electrolytes for lithium-sulfur batteries: Functional mechanisms, challenges and perspectives

Jili Xu et al.

Summary: This paper reviews the electrolytes of lithium-sulfur batteries (LSBs) and emphasizes the recent advances in electrolyte design strategies for improving the performance of LSBs at low temperatures. The challenges of liquid and solid electrolytes at low temperatures are analyzed, and research directions for overcoming these challenges are proposed.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Advanced cathodic free-standing interlayers for lithium-sulfur batteries: understanding, fabrication, and modification

Jianhua Zhou et al.

Summary: Lithium-sulfur batteries have shown great potential but still face challenges. The introduction of free-standing interlayers is a promising solution. This review summarizes the fabrication methods and modifications of free-standing interlayers, and discusses the outlook for high-performance interlayers.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Add to Collection

Article Electrochemistry

Highly oriented MIL-101(Cr) continuous films grown on carbon cloth as efficient polysulfide barrier for lithium-sulfur batteries

Feng Zhang et al.

Summary: In this study, a highly oriented MIL-101(Cr) continuous film was developed on carbon cloth and used as a reliable interlayer for lithium-sulfur batteries. This interlayer possesses a unique hierarchical porous structure and abundant active sites, providing efficient confinement of polysulfides and promoting the conversion of polysulfides. The composite interlayer exhibited excellent rate performance, cycle stability and areal specific capacity under high sulfur loading.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Identifying the active sites and multifunctional effects in nitrogen-doped carbon microtube interlayer for confining-trapping-catalyzing polysulfides

Narui Li et al.

Summary: A self-standing nitrogen-doped carbonized cotton cloth (N-CCC) interlayer with multifunctional active sites is reported for lithium-sulfur batteries, showing improved performance and stability. The N-CCC interlayer enables high capacity and stability, as well as competitive performance at high current density and sulfur loading. This research provides a rational mechanism analysis for practical high-energy/power density LSBs.

NANO ENERGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Graphene-based interlayer for high-performance lithium-sulfur batteries: A review

Yong Liu et al.

Summary: Graphene has been widely investigated as an intermediate layer in Li-S batteries to overcome problems like the insulating characteristic of sulfur and unsatisfactory cycling life. Strategies such as physical and chemical confinement have been utilized to enhance the electrochemical performance of graphene-based interlayers for Li-S batteries. Challenges and prospects for future research in utilizing graphene-based materials in Li-S batteries have been proposed in this review.

MATERIALS & DESIGN (2021)

Add to Collection

Article Chemistry, Physical

Tubular CoFeP@CN as a Mott-Schottky Catalyst with Multiple Adsorption Sites for Robust Lithium-Sulfur Batteries

Chaoqi Zhang et al.

Summary: A Mott-Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures is proposed to enhance the performance of lithium-sulfur batteries. The CoFeP@CN composites demonstrated superior rate performance and cycling stability, effectively addressing the issues often overlooked in LSBs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Wide Working Temperature Range Rechargeable Lithium-Sulfur Batteries: A Critical Review

Zhenfang Zhou et al.

Summary: Lithium sulfur batteries, with their ultrahigh theoretical gravimetric energy density and low cost and environmental friendliness, are being further developed to operate at a wide range of temperatures. Challenges in material performance, electrolytes, lithium metal anodes, and the impact of thermal changes are key areas for future research directions in enabling lithium sulfur batteries to function effectively in extreme temperature conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Electrochemistry

High-performance Li-S batteries enabled by polysulfide-infiltrated free-standing 3D carbon cloth with CeO2 nanorods decoration

Zhen Wei et al.

Summary: The combination of CeO2 nanorods decorated interwoven 3-D carbon cloth with Li2S6-containing catholyte shows significant improvements in the electrochemical performance of Li-S batteries, delivering superior capacity retention with minimal capacity fading.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Energy & Fuels

Fabricating a Carbon Microtube Interlayer by a Sustainable Green Process as a Polysulfide-Trapping Shield for Lithium-Sulfur Batteries

Pu Cheng et al.

Summary: In this study, hierarchical hollow carbon microtubes (CMTs) were prepared by carbonization of willow catkins and coated on a commercialized separator for high-performance lithium-sulfur batteries (LSBs). The CMTs-coated separator effectively inhibits the diffusion of polysulfides, improving the capacity and cycling performance of the battery.

ENERGY & FUELS (2021)

Add to Collection

Review Energy & Fuels

Electrolyte Issues in Lithium-Sulfur Batteries: Development, Prospect, and Challenges

Gang Liu et al.

Summary: Lithium-sulfur (Li-S) batteries have high theoretical energy density and cost-effective sulfur cathodes, but face challenges due to issues with electrolytes, particularly the polysulfide shuttling effect. Research has focused on electrolyte development, including components like salt, solvent, additives, and solid electrolyte designs. Comprehensive reviews aim to address development, prospects, and challenges in Li-S battery electrolytes.

ENERGY & FUELS (2021)

Add to Collection

Article Electrochemistry

Minimizing Long-Chain Polysulfide Formation in Li-S Batteries by Using Localized Low Concentration Highly Fluorinated Electrolytes

Rebecca Glaser et al.

Summary: In this study, localized electrolytes based on fluorinated ethers with a total salt concentration of only 0.1 M were investigated for their performance in Li-S batteries. These electrolytes were found to suppress the formation of long-chain polysulfides, limit sulfur cathode dissolution, and improve active material utilization, leading to higher capacity and coulombic efficiency compared to traditional electrolyte solvent mixtures.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A multifunctional UiO-66@carbon interlayer as an efficacious suppressor of polysulfide shuttling for lithium-sulfur batteries

Shaoning Zheng et al.

Summary: The UiO-66@CC interlayer effectively inhibits the shuttle effect in lithium-sulfur batteries and achieves fast redox kinetics by providing sufficient adsorption and catalytic sites. It improves the cycling stability, rate performance, specific capacity, and area capacity of the battery, leading to nearly 100% capacity retention after 100 cycles and a decay rate of 0.07% over 600 cycles.

NANOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Influence of Lithium Polysulfide Clustering on the Kinetics of Electrochemical Conversion in Lithium-Sulfur Batteries

Abhay Gupta et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Temperature-Dependent Chemical and Physical Microstructure of Li Metal Anodes Revealed through Synchrotron-Based Imaging Techniques

Keegan R. Adair et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Electrochemistry

Efficiently immobilizing and converting polysulfide by a phosphorus doped carbon microtube textile interlayer for high-performance lithium-sulfur batteries

Bangbei Zheng et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Regulating evolution of valence bonds on carbon surface to inhibit dissolution of polysulfides during production

Caiwei Wang et al.

CARBON (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Perspective toward Practical Lithium-Sulfur Batteries

Meng Zhao et al.

ACS CENTRAL SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Designing Advanced Lithium-Based Batteries for Low-Temperature Conditions

Abhay Gupta et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Recent advances in interlayer and separator engineering for lithium-sulfur batteries

Deming Zhu et al.

Journal of Energy Chemistry (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon Microtube Textile with MoS2Nanosheets Grown on Both Outer and Inner Walls as Multifunctional Interlayer for Lithium-Sulfur Batteries

Jiaye Yang et al.

ADVANCED SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Interlayer design based on carbon materials for lithium-sulfur batteries: a review

Lei Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Energy & Fuels

One-Step Synthesis of MoS2 Nanosheet Arrays on 3D Carbon Fiber Felts as a Highly Efficient Catalyst for the Hydrogen Evolution Reaction

Xiaobei Zang et al.

ENERGY TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

Chaoqi Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Manipulation of Edge-Site Fe-N2 Moiety on Holey Fe, N Codoped Graphene to Promote the Cycle Stability and Rate Capacity of Li-S Batteries

Yazhou Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Strong cooperative interaction of lithium and hydrogen bonds between 4-aminobenzoic acid modified interlayer and polysulfides for lithium-sulfur batteries

Soracha Kosasang et al.

CARBON (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A Collaboratively Polar Conductive Interface for Accelerating Polysulfide Redox Conversion

Bokai Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Dispersed Catalytic Co3S4 among a Hierarchical Carbon Nanostructure for High-Rate and Long-Life Lithium-Sulfur Batteries

Hui Zhang et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Physical

Interlayer Material Selection for Lithium-Sulfur Batteries

Linlin Fan et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Waste cotton cloth derived carbon microtube textile: a robust and scalable interlayer for lithium-sulfur batteries

Bangbei Zheng et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

A binder-free electrode architecture design for lithium-sulfur batteries: a review

Junling Guo et al.

NANOSCALE ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

SiO2@MoS2 core-shell nanocomposite layers with high lithium ion diffusion as a triple polysulfide shield for high performance lithium-sulfur batteries

Jingyi Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Electrochemistry

The Effect of Current Inhomogeneity on the Performance and Degradation of Li-S Batteries

I. Hunt et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Interlayer Based on Molybdenum Diphosphide Catalyst and Carbon Nanotube Film for Lithium-Sulfur Batteries

Yufeng Luo et al.

SMALL (2018)

Add to Collection

Article Electrochemistry

Insight into the Function Mechanism of the Carbon Interlayer in Lithium-Sulfur Batteries

Kai Yuan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon nanomaterials for advanced lithium sulfur batteries

Zheng-Long Xu et al.

NANO TODAY (2018)

Add to Collection

Article Chemistry, Physical

Regulating the polysulfide redox conversion by iron phosphide nanocrystals for high-rate and ultrastable lithium-sulfur battery

Shaozhuan Huang et al.

NANO ENERGY (2018)

Add to Collection

Article Electrochemistry

Functionalized Double Side Coated Separator for Lithium-Sulfur Batteries with Enhanced Cycle Life

Maryam Sadat Kiai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Tungsten Disulfide Catalysts Supported on a Carbon Cloth Interlayer for High Performance Li-S Battery

Jungjin Park et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Review Chemistry, Physical

Review on High-Loading and High-Energy Lithium-Sulfur Batteries

Hong-Jie Peng et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Review Energy & Fuels

A materials perspective on Li-ion batteries at extreme temperatures

Marco-Tulio F. Rodrigues et al.

NATURE ENERGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

ZrO2-Nanoparticle-Modified Graphite Felt: Bifunctional Effects on Vanadium Flow Batteries

Haipeng Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries

Hong-Jie Peng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries

Jian-Qiu Huang et al.

CARBON (2016)

Add to Collection

Review Chemistry, Multidisciplinary

High temperature electrical energy storage: advances, challenges, and frontiers

Xinrong Lin et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Designing high-energy lithium-sulfur batteries

Zhi Wei Seh et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanism and Kinetics of Li2S Precipitation in Lithium-Sulfur Batteries

Frank Y. Fan et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Electrochemistry

Oxygen-containing Functional Groups Enhancing Electrochemical Performance of Porous Reduced Graphene Oxide Cathode in Lithium Ion Batteries

Dongbin Xiong et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

Lotus Root-like Structured Carbon Fibers as Encapsulated Sulfur Host for Lithium Sulfur Batteries

Zhaoxia Cao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: Progress and prospects

Jia-Qi Huang et al.

ENERGY STORAGE MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Rechargeable Lithium-Sulfur Batteries

Arumugam Manthiram et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

New Approaches for High Energy Density Lithium-Sulfur Battery Cathodes

Scott Evers et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection

Article Chemistry, Multidisciplinary

A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer

Yu-Sheng Su et al.

CHEMICAL COMMUNICATIONS (2012)

Add to Collection

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Add to Collection

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.