☆ 4.7 Article

Defect Passivation with Multifunctional Fluoro-Group-Containing Organic Additives for Highly Efficient and Stable Perovskite Solar Cells

ENERGY & FUELS (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Thiocyanate-Passivated Diaminonaphthalene-Incorporated Dion-Jacobson Perovskite for Highly Efficient and Stable Solar Cells

Yukta et al.

Summary: Two-dimensional metal halide perovskites show promise as photovoltaic materials, but their solar cells still have lower efficiency than their three-dimensional counterparts. Introducing organic cations and additives can improve crystallinity and charge transport in perovskites, enhancing solar cell efficiency.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Energy & Fuels

Mixed Dimensional Perovskites Heterostructure for Highly Efficient and Stable Perovskite Solar Cells

Chuangye Ge et al.

Summary: The synthesis of 1D Me3SPbI3 nanoarrays in aqueous condition and their incorporation into lead halide 3D perovskites resulted in an efficient and stable heterostructural 1D/3D perovskite photoactive layer. This design achieved a PCE of 22.06% for PSCs and maintained 97% of their initial efficiency after 1000 hours of storage under ambient conditions, demonstrating promising potential for next-generation highly efficient and stable perovskite solar cells.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Physical

Ambient Stable Perovskite Solar Cells through Trifluoro Acetic Acid-Mediated Multifunctional Anchoring

Ritesh Kant Gupta et al.

Summary: This study demonstrates the use of trifluoro acetic acid (TFAA) as an additive to improve the efficiency and stability of hybrid perovskite solar cells (PSCs). TFAA interacts with perovskites to passivate defect states, resulting in enhanced device performance. Various experimental techniques were used to confirm the improvement in efficiency and stability.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Sodium fluoride sacrificing layer concept enables high-efficiency and stable methylammonium lead iodide perovskite solar cells

Huimin Xiang et al.

Summary: This study demonstrates a simple and effective approach to enhance the power conversion efficiency (PCE) and stability of MAPbI(3)-based organic-inorganic halide perovskite solar cells (PSCs) by introducing a sodium fluoride (NaF) sacrificing layer and passivating the mesoporous TiO2 electron-transporting layer (ETL). The optimized PSC achieves a high PCE of 20.9% and remarkable stability under moisture, thermal, and sunlight conditions.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Applied

Review of current progress in hole-transporting materials for perovskite solar cells

Prerna Mahajan et al.

Summary: Recent advancements in perovskites' application as a solar energy harvester have been astonishing. However, high stability and affordability still pose significant challenges.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Is machine learning redefining the perovskite solar cells?

Nishi Parikh et al.

Summary: Machine learning has emerged as a powerful technology in the field of metal halide perovskites for the prediction of material properties and rational design. Its applications in optimizing fabrication processes and reducing costs are gaining significant attention. This review provides a comprehensive overview of the use of machine learning in designing absorber layers and complete perovskite solar cells, discussing challenges and future research directions.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Triple Passivation Approach to Laminate Perovskite Layers for Augmented UV and Ambient Stable Photovoltaics

Rabindranath Garai et al.

Summary: By using an advanced triple passivation technique with UV-absorbing BP molecules, the stability of perovskite solar cells is significantly improved, leading to a high power conversion efficiency and enhanced carrier transport. This approach effectively shields the perovskite layer from UV irradiation and moisture, demonstrating impressive UV and ambient stability.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Thiourea with sulfur-donor as an effective additive for enhanced performance of lead-free double perovskite photovoltaic cells

Xiaoqing Yang et al.

Summary: This work presents a strategy to retard the crystallization of Cs2AgBiBr6 perovskites by introducing Lewis base additives, leading to improved film quality, decreased defect density, and inhibited charge carrier recombination. The optimized cell exhibits a superior power conversion efficiency of 3.07% and outstanding stability with a retention rate of 95% after 20 days of storage in air. This study provides an effective strategy for further improvements in the performance of inorganic lead-free Cs2AgBiBr6-based photovoltaic cells.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Efficient and Stable 2D Dion Jacobson/3D Perovskite Heterojunction Solar Cells

Yukta et al.

Summary: Heterostructures involving 2D/3D perovskites have potential applications in the field of solar cells, combining high efficiency and stability. This study successfully constructed 2D/3D perovskite heterojunction solar cells by introducing modifications to the 3D perovskite active layer and adding a 2D perovskite capping layer, achieving remarkably high photovoltaic performance.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Advance and prospect of metal-organic frameworks for perovskite photovoltaic devices

Xiao Liang et al.

Summary: The combination of MOFs and perovskite photovoltaic devices has opened up a new pathway to address stability issues and significantly enhance photovoltaic performance. MOFs can serve as an interlayer, a modifier of the interlayer, and a MOFs/perovskite heterojunction, improving device stability and efficiency.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Two-dimensional Dion-Jacobson halide perovskites as new-generation light absorbers for perovskite solar cells

Huimin Xiang et al.

Summary: In recent years, two-dimensional (2D) halide perovskites have gained attention as light absorbers in perovskite solar cells (PSCs) due to their better stability compared to three-dimensional (3D) perovskites. However, the power conversion efficiencies (PCEs) of 2D PSCs are still lower than their 3D counterparts. This review compares Dion-Jacobson (DJ) perovskites with Ruddlesden-Popper (RP) perovskites in terms of their properties and presents strategies to improve the PCE and stability of DJ-PSCs. The remaining challenges and future directions for DJ-PSCs are also discussed.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Energy & Fuels

Identifying dominant recombination mechanisms in spiro-based conventional perovskite solar cells: Roles of interface and bulk recombination

Nishi Parikh et al.

Summary: Perovskite solar cells are popular in the PV community due to their ease of processing and high efficiency. Research focuses on controlling carrier recombination to reach theoretical performance limits. Studying different layers' roles in recombination using EIS can help improve device performance.

ENERGY REPORTS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient and Stable Carbon-Based Perovskite Solar Cells via Passivation by a Multifunctional Hydrophobic Molecule with Bidentate Anchors

Tingting Xu et al.

Summary: Surface passivation using 2-amino-5-(trifluoromethyl)pyridine has been shown to effectively enhance the power conversion efficiency and long-term stability of perovskite solar cells. The bidentate groups in the passivation agent reduce defect states, promote carrier transport, and suppress non-radiative recombination in perovskite films. This treatment significantly improves PSC efficiency and stability, with PCE maintaining 80% of its original value after 1200 hours of storage at room temperature with around 35% relative humidity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Physics, Applied

First investigation of additive engineering for highly efficient Cs2AgBiBr6-based lead-free inorganic perovskite solar cells

Xiaoqing Yang et al.

Summary: This study investigates additive engineering in Cs2AgBiBr6-based PSCs, where the introduction of guanidinium thiocyanate (GuaSCN) additive effectively improves perovskite film quality, enhances efficiency, and strengthens stability.

APPLIED PHYSICS REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Additive-Assisted Defect Passivation for Minimization of Open-Circuit Voltage Loss and Improved Perovskite Solar Cell Performance

Mohammad Adil Afroz et al.

Summary: Passivation of trap states using multiple carboxylic acid-functionalized small aromatic molecules improves the performance and stability of perovskite solar cells. Devices incorporating BTCA exhibit the highest power conversion efficiency and open-circuit voltage, along with enhanced thermal stability.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Conjugated Polyelectrolyte-Passivated Stable Perovskite Solar Cells for Efficiency Beyond 20%

Rabindranath Garai et al.

Summary: In this study, the novel conjugated polyelectrolyte PHIA was investigated for perovskite passivation, resulting in significantly reduced trap states, lesser recombination, and a high power conversion efficiency of 20.17%. The passivation approach also improved long-term device stability, with a large-area device demonstrating potential for future commercialization.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Electrochemistry

Low-frequency carrier kinetics in triple cation perovskite solar cells probed by impedance and modulus spectroscopy

Naveen Kumar Tailor et al.

Summary: In this study, the low-frequency carrier kinetics of organometallic halide perovskite-based solar cells were investigated. It was found that the dielectric permittivity showed a strong frequency dependence with dielectric relaxation, indicating localized charge carrier relaxation and hopping processes in these high-efficiency perovskite photovoltaics.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Halide Engineering for Mitigating Ion Migration and Defect States in Hot-Cast Perovskite Solar Cells

Ritesh Kant Gupta et al.

Summary: Controlling the morphology of perovskite to achieve large-sized grains with small-width grain boundaries is crucial for high photovoltaic performance. The incorporation of MABr into mixed halide perovskite effectively minimizes ion migration and results in high-quality films with large grains. The addition of MABr improved the power conversion efficiency of the perovskite solar cells, with the 0.1MABr ratio showing the best performance.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Trap Density of States through Impedance Analysis for Flexible Organic Field-Effect Transistors

Anwesha Choudhury et al.

Summary: The choice of dielectric material significantly impacts device performance by influencing the D/S interface. Investigating trap density of states at the interface using impedance spectroscopy validates its potential as a DOS analysis method for OFET applications. Fabricating the device on a flexible substrate and testing its mechanical stability confirms its practical utility for developing flexible electronic circuit components.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Review Chemistry, Physical

Impedance Spectroscopy for Metal Halide Perovskite Single Crystals: Recent Advances, Challenges, and Solutions

Mohammad Adil Afroz et al.

Summary: Metal halide perovskite single crystals are attracting attention in energy research due to their impressive responses in optical sensing and photovoltaics. The transition from polycrystalline to monocrystalline morphology helps maintain and enhance material properties, but insufficient control over thickness and size during growth leads to differences between surface and bulk responses. Impedance spectroscopy is a powerful technique for understanding kinetics in polycrystalline perovskite materials, highlighting the importance of analyzing ionic migration, trap states, and recombination mechanisms for exploiting the full potential of MHPSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Dual-Passivation Strategy for Improved Ambient Stability of Perovskite Solar Cells

Ritesh Kant Gupta et al.

Summary: Dual-passivation of MAPbI(3)-based perovskite using PTSA in the bulk and hydrophobic PS at the surface significantly reduces trap-density, improves device performance, and enhances PCE. The dual-passivation improves perovskite crystallinity, grain size, and reduces trap-density, resulting in higher photogenerated charges and better charge transport. The modified device retains 93% of the original PCE after 1000 hours under ambient conditions.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Surface recrystallized stable 2D-3D graded perovskite solar cells for efficiency beyond 21%

Rabindranath Garai et al.

Summary: Organic-inorganic hybrid perovskite solar cells have seen rapid efficiency improvements recently, but their commercialization is hindered by instability towards ambient conditions. The formation of a thin layer of 2D perovskite over a 3D structure has enhanced stability and efficiency. Surface treatment with a strategically synthesized multifunctional molecule has led to outstanding efficiencies and improved ambient stability for perovskite solar cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing the efficiency and ambient stability of perovskite solar cells via a multifunctional trap passivation molecule

Maimur Hossain et al.

Summary: A study identified an improvement method for perovskite solar cells, where adding a cancer drug as a passivation agent significantly increased the efficiency and long-term stability of the cells.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fluoroarene derivative based passivation of perovskite solar cells exhibiting excellent ambient and thermo-stability achieving efficiency >20%

Maimur Hossain et al.

Summary: Fluoroaromatic amine additives were used to passivate hybrid perovskite solar cells, significantly enhancing their stability and efficiency. Among these additives, PFA showed the most remarkable improvement in both moisture and thermo-stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Deep surface passivation for efficient and hydrophobic perovskite solar cells

Junmin Xia et al.

Summary: The introduction of hydrophobic 3-(trifluoromethyl) phenethylamine hydroiodide (CF(3)PEAI) passivation agent on perovskite films enhances the performance and stability of perovskite solar cells. CF(3)PEAI forms a 2D perovskite structure, penetrates deep into the films, passivates internal defects, and improves long-term stability. This passivated perovskite film exhibits better energy level alignment, longer carrier lifetimes, and higher stability, leading to an increase in solar cell performance and retention of initial performance under ambient air conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Energy & Fuels

The physics of ion migration in perovskite solar cells: Insights into hysteresis, device performance, and characterization

Dongchen Lan

PROGRESS IN PHOTOVOLTAICS (2020)

Add to Collection

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Ambient-Condition-Processed Polymer Solar Cells and Organic Thin-Film Transistors

Rabindranath Garai et al.

ACS OMEGA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Yong Li et al.

ADVANCED SCIENCE (2020)

Add to Collection

Review Energy & Fuels

Recent Advances in Cs2AgBiBr6-Based Halide Double Perovskites as Lead-Free and Inorganic Light Absorbers for Perovskite Solar Cells

Xiaoqing Yang et al.

ENERGY & FUELS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Efficient Trap Passivation of MAPbI3 via Multifunctional Anchoring for High-Performance and Stable Perovskite Solar Cells

Rabindranath Garai et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Article Chemistry, Physical

Efficient and Stable MAPbI3-Based Perovskite Solar Cells Using Polyvinylcarbazole Passivation

Lyubov A. Frolova et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Review Chemistry, Physical

Recent progress in morphology optimization in perovskite solar cell

Naveen Kumar Tailor et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Thermal Stability and Performance Enhancement of Perovskite Solar Cells Through Oxalic Acid-Induced Perovskite Formation

Mohammad Adil Afroz et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Efficient defect passivation of perovskite solar cells via stitching of an organic bidentate molecule

Moon-Soo Lee et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Regulating active layer thickness and morphology for high performance hot-casted polymer solar cells

Ritesh Kant Gupta et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring

Hao Zhang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Efficient Defect Passivation for Perovskite Solar Cells by Controlling the Electron Density Distribution of Donor-π-Acceptor Molecules

Tianhao Wu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

High-Performance Perovskite Solar Cells with Excellent Humidity and Thermo-Stability via Fluorinated Perylenediimide

Jia Yang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Enhanced perovskite solar cell performance via defect passivation with ethylamine alcohol chlorides additive

Kaiping Zhu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Charge carrier dynamics study and morphology optimization in solvent annealed CH3NH3PbI3 perovskite for air processed stable solar cell application

Anubhav Raghav et al.

CHEMICAL PHYSICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallization and grain growth regulation through Lewis acid-base adduct formation in hot cast perovskite-based solar cells

Mohammad Adil Afroz et al.

ORGANIC ELECTRONICS (2019)

Add to Collection

Article Chemistry, Physical

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Hyeonwoo Kim et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Enhanced Stability of MAPbI3 Perovskite Solar Cells using Poly(p-chloro-xylylene) Encapsulation

Hyojung Kim et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Physical

Effect of bidentate and tridentate additives on the photovoltaic performance and stability of perovskite solar cells

Jiangzhao Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Grain Boundary Modification via F4TCNQ To Reduce Defects of Perovskite Solar Cells with Excellent Device Performance

Cong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation

Tianqi Niu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Energy & Fuels

Double-edged sword effects of cation rotation and additive passivation on perovskite solar cell performance: an ab initio investigation

Lei Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced performance of perovskite solar cells via anti-solvent nonfullerene Lewis base IT-4F induced trap-passivation

Yaxiong Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

Enhanced stability and optoelectronic properties of MAPbl(3) films by a cationic surface-active agent for perovskite solar cells

He Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

General Nondestructive Passivation by 4-Fluoroaniline for Perovskite Solar Cells with Improved Performance and Stability

Shenghe Zhao et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films

Qi Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

One-Year stable perovskite solar cells by 2D/3D interface engineering

G. Grancini et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells

Lijian Zuo et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Wearable Large-Scale Perovskite Solar-Power Source via Nanocellular Scaffold

Xiaotian Hu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Energy & Fuels

Stable Large-Area (10 x 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency

Yue Hu et al.

SOLAR RRL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Pinhole-Free and Surface-Nanostructured NiOx Film by Room-Temperature Solution Process for High-Performance Flexible Perovskite Solar Cells with Good Stability and Reproducibility

Hong Zhang et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Film Grain-Size Related Long-Term Stability of Inverted Perovskite Solar Cells

Chien-Hung Chiang et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Multidisciplinary Sciences

A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells

Xiong Li et al.

SCIENCE (2016)

Add to Collection

Review Energy & Fuels

Stability of perovskite solar cells

Dian Wang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Article Multidisciplinary Sciences

Improving the photovoltaic performance of perovskite solar cells with acetate

Qian Zhao et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Physical

Understanding the relationship between ion migration and the anomalous hysteresis in high-efficiency perovskite solar cells: A fresh perspective from halide substitution

Teng Zhang et al.

NANO ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

Manda Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Article Multidisciplinary Sciences

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Samuel D. Stranks et al.

SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.