Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Zhuang Xiong et al.
Summary: In this study, a multifunctional interfacial material, BGCl, was introduced to modify the interface of perovskite solar cells. The BGCl improved electron extraction and crystal growth of perovskite by chemically linking to SnO2 and anchoring PbI2. This modification led to better energetic alignment, reduced interfacial defects, and homogeneous perovskite crystallites, resulting in highly efficient and stable performance.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yuzhuo Zhang et al.
Summary: A swift and eco-friendly synthesis route was developed for mass production of halide perovskites in the industry, leading to high-performance perovskite solar cells with superior carrier transport. Additionally, the synthesized powder exhibited superior storage stability for over 10 months, which is conducive to practical commercialization.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Weijie Chen et al.
Summary: An effective method of enhancing the built-in electric field intensity in perovskite solar cells is reported in this study. By doping an organic ferroelectric material, PVDF:DH, an additional electric field is generated, promoting charge-carrier transport, perovskite growth, and improving the overall performance and stability of the solar cells.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhichao Shen et al.
Summary: The use of perovskite crystal array (PCA) can improve the quality of perovskite solar cells' absorption layer by promoting a controlled bottom-up crystallization process, resulting in a perovskite film with high crystallinity and reduced grain boundaries. The solar cells based on this film achieved high power conversion efficiency and maintained their initial efficiency after long-term operation.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Jing Lu et al.
Summary: This study comprehensively investigates the growth, structure, and optoelectronic properties of FA-based layered perovskites, revealing the influence of FA:PMA ratios and n values on the structure and performance of layered perovskites.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Chemistry, Physical
Wenlong Shao et al.
Summary: Dopant engineering using molecular/ionic additives is a common technique to improve the stability of perovskite solar cells (PSCs). This study introduces a halogen-free cesium trifluoroacetate (CsCF3COO, CsTFA) into the precursor of PSCs, effectively suppressing non-radiative recombination and reducing voltage deficit. The power conversion efficiency of the devices is improved from 21.1% to 22.3% with enhanced stability.
JOURNAL OF POWER SOURCES
(2022)
Article
Multidisciplinary Sciences
Minjin Kim et al.
Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.
Article
Chemistry, Physical
Shiang Zhang et al.
Summary: By forming a Ruddlesden-Popper 2D (n = 1) perovskite structure on the surface of CsPbI3-xBrx, the efficiency of the solar cell can be significantly improved, energy loss reduced, surface trap density decreased, charge lifetime extended, hole extraction efficiency increased, and severe interfacial nonradiative charge recombination minimized.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Xuejie Zhu et al.
Summary: A new approach using an ionic liquid was designed to improve the stability and performance of metal-halide perovskite solar cells. Experimental results showed that this method effectively enhances the photovoltaic performance while exhibiting outstanding stability characteristics.
ADVANCED ENERGY MATERIALS
(2022)
Editorial Material
Chemistry, Physical
Todd Levin et al.
Article
Chemistry, Physical
Chao Luo et al.
Summary: In this study, highly oriented 2D perovskite seeds were introduced to optimize the growth kinetics of 3D perovskite, resulting in a high-quality mixed-dimensional perovskite film with superior PCE and FF.
Article
Chemistry, Multidisciplinary
Yudi Wang et al.
Summary: This study demonstrates the use of defective multi-walled carbon nanotubes to improve the charge transfer kinetics of carbon-based perovskite solar cells (C-PSCs). Through molecular-level interface coupling and nanometer-scale interface coupling, rapid charge transfer and seamless connection have been achieved, resulting in improved power conversion efficiency and operational stability.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Lu Yang et al.
Summary: A novel compound HADI was designed to improve the efficiency and stability of flexible perovskite solar cells, showing significant roles in surface modification, passivation, and charge transfer. PSCs based on HADI-SnO2 electron transport layer exhibited outstanding performance.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Tong Zhou et al.
Summary: Controlling crystal growth in perovskite films using 2D (NpMA)(2)PbI4 perovskite and 1-naphthalenemethylammonium iodide (NpMAI) can significantly improve the film quality and increase grain size, reducing defects and improving carrier lifetime. The best-performing device shows high power conversion efficiency and improved operational stability.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Xinhui Luo et al.
Summary: In order to improve the efficiency of perovskite solar cells, two organic molecules are studied as passivators. The results show that the molecular geometry and intermolecular ordering are significant for effective passivation. During the crystallization process via liquid medium annealing, passivation molecules can form a uniform network that reduces recombination at the interface.
ADVANCED MATERIALS
(2022)
Review
Chemistry, Physical
Zhiyong Liu et al.
Summary: This review summarizes the fundamental physical properties of formamidinium lead iodide (FAPbI(3)) perovskite materials and discusses the factors influencing their stability. The phase evolution with temperature is established by reviewing previous reports. Furthermore, a range of strategies to stabilize FA-rich perovskite are summarized, and new viewpoints for improving the efficiency and stability of perovskite solar cells are provided.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Jun Zhu et al.
Summary: Formamidinium lead triiodide-based perovskite solar cells have shown great potential for future photovoltaic technologies. The introduction of heptadecafluorooctanesulfonic acid tetraethylammonium salt (HFSTT) as a modifier has improved the quality and stability of the perovskite films, leading to high power conversion efficiencies and long-term performance.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Applied
Wenhao Zhang et al.
Summary: In this study, analogues of amino acids were introduced into methylammonium lead iodide perovskites, revealing that these additives can play different roles in the crystallization process, leading to a better understanding of their mechanisms beyond their functional groups.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Hairui Liu et al.
Summary: The introduction of Y6 as a buffer layer for SnO2-based flexible perovskite solar cells enhances charge extraction ability, bending stability, and reduces internal stress of perovskite films. It also improves interfacial charge extraction and reduces defect density.
Article
Chemistry, Physical
Yiming Li et al.
Summary: Researchers have developed a dual-functional additive that can regulate the crystallization and defects of FA-Cs perovskite film, resulting in improved efficiency and stability of perovskite solar cells.
Article
Chemistry, Physical
Jiwei Liang et al.
Summary: This study reveals the origins and influences of metallic lead (Pb-0) in metal-halide perovskites, and provides a strategy for avoiding the formation of detrimental Pb-0 byproducts. This has significant implications for enhancing the performance of devices such as perovskite solar cells.
Article
Chemistry, Multidisciplinary
Zhixiao Qin et al.
Summary: The study introduces a method of using zwitterion-functionalized tin(IV) oxide as an electron-transport layer to induce the crystallization of high-quality black-phase FAPbI(3). The treated tin(IV) oxide rearranges residual lead iodide in the perovskite layer, reducing side effects and improving optoelectronic performance. The resulting perovskite solar cells show excellent power conversion efficiency and long-term stability.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Chang Liu et al.
Summary: In this study, fluoride is used as a passivation agent to reduce defects on both the TiO2 surface and the bottom surface of the perovskite layer, thereby improving the efficiency and stability of PSCs.
ADVANCED ENERGY MATERIALS
(2022)
Article
Engineering, Environmental
Jiarong Wang et al.
Summary: The ambient air fabrication of perovskite solar cells (PSCs) offers lower production cost and better conditions for commercial production. However, it often results in rough surface and nonuniform coverage of perovskite film, leading to decreased efficiency. This study introduces an amorphous intermediate strategy to prepare oriented perovskite film under ambient air condition. The fabricated PSCs achieved high efficiency and excellent stability.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Applied
Fei Wang et al.
Summary: This study investigated the mechanism of ionic-liquid-assisted perovskite film formation using a two-step method. The research found that the introduced ionic liquid methylammonium formate (MAFa) can lower the perovskite formation enthalpy and accelerate the crystallization process. The ionic liquid can also fill up halide vacancies in perovskite crystals, resulting in reduced trap states. With the help of MAFa IL, uniform perovskite films with larger grains and lower defect density were prepared, and the corresponding device efficiency exceeded 23% with significantly improved stability.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Feihong Ye et al.
Summary: This study systematically investigated the role of MACl in sequentially deposited Br-free FA-based perovskites, revealing that MACl can regulate the reaction, phase transition, and crystallization. Compared to traditional FAPbI(3), perovskites with MACl exhibit superior performance in terms of grain size, carrier lifetime, and trap density.
ADVANCED MATERIALS
(2021)
Article
Engineering, Environmental
Yu Zhao et al.
Summary: In this study, 2D monolayer Ti3C2Tx MXene nanosheets were introduced into the PbI2 layer to enhance reactivity and convert it to perovskite efficiently. The Ti3C2Tx additive also improved the energy-level alignment of the perovskite and passivated defects effectively, leading to a champion power conversion efficiency of 19.27%.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Physical
Tongtong Li et al.
Summary: In this study, the multifunctional additive PATMBF4 is employed to prepare CsFAMA perovskite solar cells, effectively reducing defects and improving charge transfer efficiency, resulting in a high photoelectric conversion efficiency of 21.35%.
Article
Multidisciplinary Sciences
Shangshang Chen et al.
Summary: Research has shown that perovskite films prepared by one-step solution processes grow downward during thermal annealing, starting from an intermediate phase rather than from bottom to top. Understanding this vertical heterogeneity of perovskite films is crucial as it significantly impacts the efficiency and stability of perovskite solar cells.
Article
Chemistry, Multidisciplinary
Hongwei Zhu et al.
Summary: The study introduces a trifluoromethylation strategy using TFMBAI and TFP as additives to improve the PCE and moisture resistance of PSCs. By surface treating the perovskite with TFMBAI and adding TFP to the HTL, the PSCs achieved a higher efficiency and improved durability against moisture attack.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2021)
Article
Chemistry, Physical
Yong Zhang et al.
Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.
ADVANCED ENERGY MATERIALS
(2021)
Article
Multidisciplinary Sciences
Jaeki Jeong et al.
Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.
Article
Chemistry, Physical
Lihua Zhu et al.
Summary: Nonradiative recombination losses caused by trap states at the surface and grain boundaries hinder the enhancement of power conversion efficiency and stability in perovskite solar cells. The introduction of 11MA additive successfully improves crystallinity, reduces trap state density, and inhibits ion migration, leading to simultaneous improvement in efficiency and stability. The device with 11MA additive achieves significantly higher PCE and maintains a high level of efficiency after aging for 3000 hours under ambient conditions.
ADVANCED ENERGY MATERIALS
(2021)
Article
Multidisciplinary Sciences
Paramvir Ahlawat et al.
Summary: This study investigated the solid-solid phase transition during two-step sequential deposition, revealing microscopic details through metadynamics, x-ray diffraction, and Raman spectroscopy. Polymorphs were identified for methylammonium lead iodide and formamidinium lead iodide, with a possible crystallization pathway for the highly efficient metastable alpha phase of formamidinium lead iodide discovered through simulations. Experiments guided by these simulations successfully achieved low-temperature crystallization of phase-pure alpha-formamidinium lead iodide.
Article
Chemistry, Physical
Chun-Hao Chen et al.
Summary: The two-step sequential deposition method incorporating cesium acetate and formamidinium methylammonium cesium as raw materials can improve the perovskite crystallization process, further enhancing the efficiency and quality of perovskite films.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yuzhuo Zhang et al.
Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Yuan Cai et al.
Summary: Using the multifunctional molecule DFPDA as an additive, the stability issues of perovskite solar cells have been effectively addressed, resulting in high-quality films with an efficiency of 22.21% and significantly improved stability against moisture, heat, and light.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xiaopeng Duan et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Qi Jiang et al.
ADVANCED MATERIALS
(2020)
Article
Multidisciplinary Sciences
Haizhou Lu et al.
Article
Multidisciplinary Sciences
Gwisu Kim et al.
Article
Chemistry, Physical
Kuan Liu et al.
Article
Chemistry, Physical
Dohyung Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2019)
Article
Multidisciplinary Sciences
Hanul Min et al.
Article
Multidisciplinary Sciences
Rui Wang et al.
Article
Chemistry, Physical
Jia Zhang et al.
Article
Chemistry, Physical
Jian Qing et al.
ADVANCED ENERGY MATERIALS
(2018)
Article
Multidisciplinary Sciences
Amita Ummadisingu et al.
Article
Chemistry, Multidisciplinary
Leilei Zhang et al.
CRYSTAL GROWTH & DESIGN
(2018)
Article
Energy & Fuels
Zhongze Liu et al.
Article
Multidisciplinary Sciences
Amita Ummadisingu et al.
Article
Chemistry, Multidisciplinary
Qi Jiang et al.
ADVANCED MATERIALS
(2017)
Article
Chemistry, Physical
Hauke Arne Harms et al.
FARADAY DISCUSSIONS
(2014)
Article
Chemistry, Multidisciplinary
Qi Chen et al.
Review
Materials Science, Multidisciplinary
F. Liu et al.
INTERNATIONAL MATERIALS REVIEWS
(2007)
