☆ 4.7 Article

An efficient and robust method for lithium-ion battery capacity estimation using constant-voltage charging time

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Electrical & Electronic

State of Health Estimation of Lithium-Ion Battery Based on Constant-Voltage Charging Reconstruction

Haokai Ruan et al.

Summary: This article proposes a novel state of health (SOH) estimator using partial constant-voltage (CV) charging data. Thorough analysis is performed to determine the most informative and robust health indicators (HIs), with CV capacity found to be the most suitable for SOH estimation. To address the challenge of partial CV charging, a novel CV phase reconstruction method combining Q - V modeling and open-circuit voltage (OCV) estimation is proposed to accurately predict the CV capacity based on available partial CV data. The proposed method is validated with long-term degradation experiments, demonstrating high accuracy, low charging completeness requirement, and robustness to cell inconsistency.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2023)

Add to Collection

Article Thermodynamics

Lithium-ion battery capacity estimation based on battery surface temperature change under constant-current charge scenario

Jufeng Yang et al.

Summary: Accurate estimation of battery capacity based on battery surface temperature change is proposed in this paper. Analysis of smoothed differential thermal voltammetry curves and temperature variation transformation are used to reflect battery actual capacity and reduce initial inconsistency impact, showing superior performance compared with existing methods.

ENERGY (2022)

Add to Collection

Article Thermodynamics

State of health prognostics for series battery packs: A universal deep learning method

Yunhong Che et al.

Summary: This paper proposed a strategy for generating universal health indicators and model fusion method, which can be adapted for various battery packs regardless of the types, connected cell numbers, and aging statuses. The prognostic performance is improved by model migration and fusion, extending the application area to predict the state of health for different battery packs and/or under different working conditions.

ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Comparison of expansion and voltage differential indicators for battery capacity fade

Peyman Mohtat et al.

Summary: The second-differential expansion features of lithium-ion batteries show a strong correlation with capacity fade, making them effective for capacity estimation and quality control.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Energy & Fuels

An estimation model for state of health of lithium-ion batteries using energy-based features

Li Cai et al.

Summary: Accurate state of health (SOH) estimation is a key but challenging issue in battery health monitoring (BHM) for lithium-ion batteries. Extracting energy-based features becomes a method to achieve accurate and reliable SOH estimation, as complete discharging curves are rarely available in real-world scenarios.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Health and performance diagnostics in Li-ion batteries with pulse-injection-aided machine learning

Alan G. Li et al.

Summary: This paper proposes a novel diagnostics method called 'pulse-injection-aided machine learning' (PIAML) for lithium-ion batteries during vehicle charging. The PIAML method utilizes a feedforward neural network and the battery voltage response to accurately estimate the states of health, power, and charge, without requiring charging history or battery parameters.

APPLIED ENERGY (2022)

Add to Collection

Article Thermodynamics

Adaptive online capacity prediction based on transfer learning for fast charging lithium-ion batteries

Zhang Chen et al.

Summary: In this paper, a long short-term memory network-based transfer learning model is proposed to predict battery capacity under fast charging. By introducing a novel voltage feature and using a cross-validation method to derive optimal hyperparameters, the adaptability and prediction accuracy of the model are improved. Experimental results demonstrate the effectiveness and applicability of the proposed method.

ENERGY (2022)

Add to Collection

Article Energy & Fuels

Fast self-heating battery with anti-aging awareness for freezing climates application

Rui Xiong et al.

Summary: In this study, a self-heating method for lithium-ion batteries (LIBs) at low temperatures is proposed. The influence of various heating parameters on heating performance is experimentally explored. A thermal model and capacity fade model are used to determine the appropriate duty ratio and external resistance, and a multi-objective optimization method is employed to obtain the optimal electrical parameters. The experimental results verify the effectiveness of the optimal heating strategy.

APPLIED ENERGY (2022)

Add to Collection

Article Thermodynamics

Data-driven battery state of health estimation based on interval capacity for real-world electric vehicles

Renzheng Li et al.

Summary: This paper proposes a novel SOH estimation model based on Catboost and interval capacity during the charging process, which achieves the best accuracy compared with other machine learning methods through the analysis of a year-long operation dataset of an electric taxi.

ENERGY (2022)

Add to Collection

Article Thermodynamics

State of health estimation for lithium-ion battery based on energy features

Dongliang Gong et al.

Summary: This paper aims to assess the applicability and prediction accuracy of an energy features-based state of health (SOH) estimation model for different lithium-ion batteries and charging/discharging scenarios. The experimental results demonstrate that the model has high prediction accuracy and excellent generalization ability.

ENERGY (2022)

Add to Collection

Article Thermodynamics

A fast state-of-health estimation method using single linear feature for lithium-ion batteries

Mingjie Shi et al.

Summary: This study proposes a fast state of health (SOH) estimation method based on the linear properties of short-time charging curves. The method selects a single linear health factor (LHF) through correlation analysis and uses a linear regression model to define the relationship between the LHF and SOH. The experiments demonstrate high accuracy and low estimation error of the method, with a short data acquisition time, making it suitable for online applications.

ENERGY (2022)

Add to Collection

Review Energy & Fuels

A review of non-probabilistic machine learning-based state of health estimation techniques for Lithium-ion battery

Xin Sui et al.

Summary: This paper systematically reviews the five most studied types of machine learning algorithms for battery state of health estimation, comparing their advantages and applicability. Support vector machine and artificial neural network algorithms are still research hotspots, while deep learning shows great potential in estimating battery SOH under complex aging conditions with big data. Ensemble learning provides an emerging alternative in balancing data size and accuracy.

APPLIED ENERGY (2021)

Add to Collection

Article Automation & Control Systems

Constrained Ensemble Kalman Filter for Distributed Electrochemical State Estimation of Lithium-Ion Batteries

Yang Li et al.

Summary: This article proposes a novel model-based estimator for the distributed electrochemical states of lithium-ion batteries. A reduced-order battery model is obtained through systematic simplifications of a high-order electrochemical-thermal coupled model, capturing local state dynamics inside the battery. The constrained ensemble Kalman filter (EnKF) based on a physics-based equivalent circuit model is designed to detect internal variables and address slow convergence issues.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Predictive Battery Health Management With Transfer Learning and Online Model Correction

Yunhong Che et al.

Summary: This paper proposes a novel method to predict the remaining useful life of batteries based on optimized health indicators and online model correction, which is verified to be effective under fast charging conditions. The results show that, after fine-tuning, the proposed method predicts remaining useful life with an error of fewer than 5 cycles.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Future smart battery and management: Advanced sensing from external to embedded multi-dimensional measurement

Zhongbao Wei et al.

Summary: With advancements in technology, smart batteries and management systems have emerged as the new focus. Research is shifting towards smart batteries and smart cell management to address the limitations of traditional BMS. Emerging sensing techniques and system integration innovations present new opportunities and challenges for battery management.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Co-Estimation of State of Charge and Capacity for Lithium-Ion Batteries with Multi-Stage Model Fusion Method

Rui Xiong et al.

Summary: This study proposed a multistage model fusion algorithm to co-estimate state of charge (SOC) and capacity of lithium-ion batteries in electric transports, achieving high accuracy, fast convergence speed, and anti-noise performance.

ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Deep neural network battery charging curve prediction using 30 points collected in 10 min

Jinpeng Tian et al.

Summary: The study introduces a method to accurately estimate the entire constant-current charging curves using a deep neural network, which can capture the curves accurately in a short amount of time and demonstrate effectiveness through validation, as well as the advantage of transfer learning.

JOULE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Lithium-Ion Battery State-of-Health Estimation Using the Incremental Capacity Analysis Technique

Daniel-Ioan Stroe et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)

Add to Collection

Article Energy & Fuels

Rate dependency of incremental capacity analysis (dQ/dV) as a diagnostic tool for lithium -ion batteries

A. Fly et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Energy & Fuels

An analytical model for the CC-CV charge of Li-ion batteries with application to degradation analysis

Hainin Liu et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Automation & Control Systems

Health Prognosis for Electric Vehicle Battery Packs: A Data-Driven Approach

Xiaosong Hu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Add to Collection

Article Energy & Fuels

Challenges and opportunities toward fast-charging of lithium-ion batteries

Wenlong Xie et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Chemistry, Physical

Capacity degradation in commercial Li-ion cells: The effects of charge protocol and temperature

Han Wang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Energy & Fuels

A novel resistor-inductor network-based equivalent circuit model of lithium-ion batteries under constant-voltage charging condition

Jufeng Yang et al.

APPLIED ENERGY (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review

Yi Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Add to Collection

Article Energy & Fuels

Online state-of-health estimation for lithium-ion batteries using constant-voltage charging current analysis

Jufeng Yang et al.

APPLIED ENERGY (2018)

Add to Collection

Article Thermodynamics

Incremental capacity analysis and differential voltage analysis based state of charge and capacity estimation for lithium-ion batteries

Linfeng Zheng et al.

ENERGY (2018)

Add to Collection

Article Engineering, Electrical & Electronic

The Co-estimation of State of Charge, State of Health, and State of Function for Lithium-Ion Batteries in Electric Vehicles

Ping Shen et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

Add to Collection

Review Chemistry, Physical

Towards a smarter battery management system: A critical review on battery state of health monitoring methods

Rui Xiong et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Computer Science, Information Systems

Full Charge Capacity and Charging Diagnosis of Smartphone Batteries

Mohammad Ashraful Hoque et al.

IEEE TRANSACTIONS ON MOBILE COMPUTING (2017)

Add to Collection

Article Energy & Fuels

Recording frequency optimization for massive battery data storage in battery management systems

Yuejiu Zheng et al.

APPLIED ENERGY (2016)

Add to Collection

Article Energy & Fuels

Real-time state-of-health estimation for electric vehicle batteries: A data-driven approach

Gae-won You et al.

APPLIED ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Battery state-of-charge estimation using approximate least squares

C. Unterrieder et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Differential thermal voltammetry for tracking of degradation in lithium-ion batteries

Billy Wu et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Determination of lithium-ion battery state-of-health based on constant-voltage charge phase

Akram Eddahech et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Fast charging technique for high power lithium iron phosphate batteries: A cycle life analysis

D. Ansean et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Development of first principles capacity fade model for Li-ion cells

P Ramadass et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.