☆ 4.7 Article

Battery thermal management system with heat pipe considering battery aging effect

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Review Thermodynamics

A review on thermal management of lithium-ion batteries for electric vehicles

Xinghui Zhang et al.

Summary: Electric vehicles powered by lithium-ion batteries have great potential in alleviating energy and environmental issues, but temperature management is crucial for their development and propagation. Both high and low temperature environments can negatively impact battery performance and safety, requiring proper handling.

ENERGY (2022)

Add to Collection

Article Energy & Fuels

Novel battery thermal management system with different shapes of pin fins

Zengjia Guo et al.

Summary: A novel battery thermal management system (BTMS) has been proposed in this research, utilizing different shapes of pin fins to optimize the design. Evaluation of the performance of different BTMS models shows that SPFs provide the best cooling performance, while EPFs can reduce pressure loss.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Thermodynamics

Bidirectional symmetrical parallel mini-channel cold plate for energy efficient cooling of large battery packs

Yiming Chen et al.

Summary: This paper introduces the design of a parallel mini-channel cold plate for large battery packs, which effectively reduces the temperature difference in the battery packs and the energy consumption of the system. The results show significant improvement in cooling and energy saving performance.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Performance comparison between straight channel cold plate and inclined channel cold plate for thermal management of a prismatic LiFePO4 battery

Yuntian Zhang et al.

Summary: In this study, an inclined channel cold plate was designed for a LiFePO4 battery in an electric vehicle, and its performance was compared with that of a straight channel cold plate under different conditions. The results showed that the inclined channel cold plate outperformed the straight channel cold plate, and the performance improved with a larger inclined angle. This study suggests that the inclined channel cold plate is more suitable for battery thermal management systems.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Multi-objective optimization of a mini channeled cold plate for using thermal management of a Li-Ion battery

Orhan Kalkan et al.

Summary: This paper proposes an optimized solution for a mini channeled cold plate (MCCP) in thermal management of electric vehicles. The effectiveness of the proposed solution is verified through experimental investigation. The geometric parameters and coolant flow rate are optimized using a multi-objective approach, resulting in optimum design variable values for battery temperature control.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Inclined U-shaped flat microheat pipe array configuration for cooling and heating lithium-ion battery modules in electric vehicles

Lin Liang et al.

Summary: The novel inclined U-shaped flat microheat pipe array (FMHPA) is used in the battery thermal management system to achieve high efficiency and space-saving. It reduces the maximum temperature and temperature difference of the module by 16% and 60% respectively, and maintains the heating rate within a suitable range. The FMHPAs effectively control the temperature rise rate and keep the module within the appropriate temperature range in various ambient temperatures.

ENERGY (2021)

Add to Collection

Article Thermodynamics

A novel battery thermal management system using nano-enhanced phase change materials

Ravindra Jilte et al.

Summary: The study introduces a novel modified battery module configuration using two-layer nanoparticle enhanced phase change materials, which shows better cooling performance for Li-ion cells in electric vehicles. The arrangement of m x n x p maintains cell temperature below 46 degrees C even at a hot ambient temperature of 40 degrees C, indicating the potential of the proposed system for efficient battery thermal management.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Systematic evaluation of a flat-heat-pipe-based thermal management: Cell-to-cell variations and battery ageing

Z. Liang et al.

Summary: This study investigates the temperature difference and local cell temperature in a battery pack, finding that high tolerance levels and battery ageing can lead to adverse effects on heat pipe cooling. The flat-heat-pipe-based BTM method with a high heat transfer coefficient successfully controls the temperature and temperature difference of a battery pack.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Investigation of thermal management of lithium-ion battery based on micro heat pipe array

Lincheng Wang et al.

Summary: This study proposed a heating method based on MHPA for addressing the performance deterioration of lithium-ion batteries in low temperatures, achieving rapid and uniform heating according to the established three-dimensional model. Additionally, the interaction between heat dissipation and heating modules in the integrated TMS with MHPA was analyzed, indicating that heating components can enhance high-temperature heat dissipation in the battery pack.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Thermodynamics

Experimental and numerical study of a passive thermal management system using flat heat pipes for lithium-ion batteries

Zhuqian Zhang et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe

Chunwei Zhang et al.

ENERGY (2020)

Add to Collection

Article Thermodynamics

Capacity fade characteristics of lithium iron phosphate cell during dynamic cycle

Yue Yang et al.

ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Multiphysical modeling for life analysis of lithium-ion battery pack in electric vehicles

Quan Xia et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Thermodynamics

Comparison of cooling plate configurations for automotive battery pack thermal management

K. Darcovich et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Thermal and solid electrolyte interphase characterization of lithium-ion battery

Chia-Chin Chang et al.

ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Thermal behavior of full-scale battery pack based on comprehensive heat-generation model

Kisoo Yoo et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Thermodynamics

Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern

Kai Chen et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Thermal and electrochemical performance of a serially connected battery module using a heat pipe-based thermal management system under different coolant temperatures

Jialin Liang et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)

Xin Ye et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Thermal management performance of phase change materials with different thermal conductivities for Li-ion battery packs operated at low temperatures

Ziye Ling et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement

Kai Chen et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures

Jialin Liang et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Thermodynamics

Optimization of a phase change material based internal cooling system for cylindrical Li-ion battery pack and a hybrid cooling design

Rui Zhao et al.

ENERGY (2017)

Add to Collection

Article Thermodynamics

Structural optimization of lithium-ion battery pack with forced air cooling system

Jinhong Xie et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Numerical study on the thermal performance of a composite board in battery thermal management system

Jiajia Yan et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Engineering, Chemical

Heat-pipe-based thermal management and temperature characteristics of Li-ion batteries

Wei Yuan et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs

Yonghuang Ye et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Chemistry, Physical

Dynamic thermal characteristics of heat pipe via segmented thermal resistance model for electric vehicle battery cooling

Feifei Liu et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Thermodynamics

Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements

Naixing Yang et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Experimental investigation on EV battery cooling and heating by heat pipes

Q. Wang et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

A pseudo three-dimensional electrochemical-thermal model of a prismatic LiFePO4 battery during discharge process

Meng Xu et al.

ENERGY (2015)

Add to Collection

Article Thermodynamics

Experiment study on heat transfer capability of an innovative gravity assisted ultra-thin looped heat pipe

Sihui Hong et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

Add to Collection

Article Electrochemistry

A Model for Predicting Capacity Fade due to SEI Formation in a Commercial Graphite/LiFePO4 Cell

Henrik Ekstrom et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Energy & Fuels

Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies

Tao Wang et al.

APPLIED ENERGY (2014)

Add to Collection

Article Energy & Fuels

Ultra-thin minichannel LCP for EV battery thermal management

L. W. Jin et al.

APPLIED ENERGY (2014)

Add to Collection

Article Thermodynamics

Investigation on a hydrogel based passive thermal management system for lithium ion batteries

Sijie Zhang et al.

ENERGY (2014)

Add to Collection

Article Thermodynamics

Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles

N. Javani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Chemistry, Physical

Two-dimensional electrochemical-thermal coupled modeling of cylindrical LiFePO4 batteries

Meng Xu et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack

Kuahai Yu et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

An electrochemical-thermal model based on dynamic responses for lithium iron phosphate battery

Jie Li et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery

Thanh-Ha Tran et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Thermal analyses of LiFePO4/graphite battery discharge processes

Fangming Jiang et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

A distributed thermal model for a Li-ion electrode plate pair

Meng Guo et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

Electro-thermal modeling and experimental validation for lithium ion battery

Yonghuang Ye et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Chemistry, Physical

Fail-safe design for large capacity lithium-ion battery systems

Gi-Heon Kim et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Chemistry, Physical

Thermal modelling of Li-ion polymer battery for electric vehicle drive cycles

Salvio Chacko et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Electrochemistry

Modeling of a Commercial Graphite/LiFePO4 Cell

M. Safari et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection

Review Green & Sustainable Science & Technology

A review of power battery thermal energy management

Zhonghao Rao et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

Add to Collection

Article Chemistry, Physical

SEI film formation on highly crystalline graphitic materials in lithium-ion batteries

H Buqa et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Chemistry, Physical

Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation

SA Khateeb et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection

Article Electrochemistry

Transport properties of LiPF6-based Li-ion battery electrolytes

LO Valoen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection

Article Electrochemistry

Analysis of electrochemical and thermal behavior of Li-ion cells

V Srinivasan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)

Add to Collection

Article Chemistry, Physical

Battery thermal models for hybrid vehicle simulations

AA Pesaran

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Article Electrochemistry

Electrical characteristics of 18650 Li-ion cells at low temperatures

G Nagasubramanian

JOURNAL OF APPLIED ELECTROCHEMISTRY (2001)

Add to Collection

Article Electrochemistry

Thermal-electrochemical modeling of battery systems

WB Gu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

Article Electrochemistry

Entropy changes due to structural transformation in the graphite anode and phase change of the LiCoO2 cathode

S Al Hallaj et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.