☆ 4.5 Article

Biomass Origin Waste as Activators of the Polyurethane Foaming Process

ENERGIES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Investigation of dielectric and mechanical properties of Lignocellulosic Rice Husk Fibril for high and medium voltage electrical insulation applications

T. Rajamanikandan et al.

Summary: The insulating material is made from rice husk and epoxy resin, which are environmentally friendly and durable. Mechanical disintegration of coarse rice husk creates fibrils, which are then woven together to form lightweight dielectric fibers. Chemical treatment of the rice husk fibers enhances the mechanical strength and electrical insulating properties of the composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Engineering, Mechanical

Tribological assessment of rice husk ash in eco-friendly brake friction materials

G. S. Gehlen et al.

Summary: This paper discusses the tribological behavior of new green friction materials containing rice husk and rice husk ash. Two formulations, one with 6% rice husk and one with 6% rice husk ash, were compared with a reference formulation containing alumina using the AK Master test and a braking tribometer. The formulation with rice husk ash showed comparable or better tribological performance than the reference material, especially in high temperature applications where the rice husk ash particles assisted in the formation of contact plateaus. The addition of rice husk reduced the abrasive action of the composite, resulting in a more homogeneous tribofilm on the disc compared to the other formulations.

WEAR (2023)

Add to Collection

Article Construction & Building Technology

The use of rice husk particles to adjust the rheological properties of 3D printable cementitious composites through water sorption

Matheus Pimentel Tinoco et al.

Summary: This study investigates the use of rice husk fine particles for the production of 3D printable cementitious composites. The high water sorption capacity and embodied biogenic carbon content of rice husk make it a suitable component for printable composites. The freshness properties of the composites were adjusted while reducing environmental impact. Rheological tests showed that water sorption by the particles plays an important role in the fresh properties of the composites.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Energy & Fuels

The Effect of Ash Silanization on the Selected Properties of Rigid Polyurethane Foam/Coal Fly Ash Composites

Beata Zygmunt-Kowalska et al.

Summary: According to the European Union's assumptions, achieving climate neutrality is planned by 2050. To accomplish this, a document called the European Green Deal was established, which includes a set of policies by the European Commission. One of these policies involves a circular economy that considers the use of waste in subsequent production cycles. In this study, composites of rigid polyurethane foam with 10 wt.% of modified fly ash as a filler were produced to meet the latest trends in environmentally friendly materials and waste utilization in building material production. The modified fly ash showed good results in various tests, particularly the samples modified with 1% and 2% silane solution. The use of modified fly ash in polyurethane foams can be a viable method of waste disposal and can enhance the usability of these composites.

ENERGIES (2022)

Add to Collection

Article Environmental Sciences

Optimization of Silica Extraction from Rice Husk Using Response Surface Methodology and Adsorption of Safranin Dye

Melis Gun et al.

Summary: This study aimed to extract and optimize silica from rice husk using response surface methodology and utilize the extracted silica for Safranin dye adsorption. The results showed that the KOH: RH ratio was the most important factor, and the optimum adsorption conditions were pH 8, adsorbent dose of 1 g/L, initial concentration of 25 mg/L, and contact time of 60 min.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Polymer Science

Comprehensive Analysis of the Influence of Expanded Vermiculite on the Foaming Process and Selected Properties of Composite Rigid Polyurethane Foams

Mateusz Barczewski et al.

Summary: This article presents the results of research on developing new polyurethane foams modified with thermally expanded vermiculite. The effect of different filler contents on foaming process, cell structure, thermal insulation, mechanical properties, and flammability is evaluated. The results show that the addition of vermiculite has minimal impact on the foaming process and cell structure, but significantly affects the closed cell content. Adding up to 15% vermiculite does not significantly influence the mechanical properties and flammability, which is economically important as it allows for cost reduction without compromising material performance.

POLYMERS (2022)

Add to Collection

Article Energy & Fuels

Investigation of biomass, RDF and coal ash-related problems: Impact on metallic heat exchanger surfaces of boilers

Wieslaw Kaniowski et al.

Summary: The goal of this study was to investigate the corrosion resistance of boiler steel and protective alloy coatings. Four different ashes were analyzed to determine their aggressive components and their corrosive impact on the steel surfaces. The research findings suggest that the corrosive effect of the ashes is influenced by the aggressive components present in the ash.

FUEL (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Successive organic solvent fractionation and homogenization of technical lignin for polyurethane foam with high mechanical performance

Weiqi Guo et al.

Summary: This study demonstrates an organic solvent fractionation method for lignin homogenization, which effectively reduces the heterogeneity of lignin and utilizes each fraction to prepare polyurethane foams (PUFs) with excellent mechanical properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Comparative Study on Selected Properties of Modified Polyurethane Foam with Fly Ash

Monika Kuznia et al.

Summary: The aim of this article is to compare the effects of two types of fly ash as fillers for rigid polyurethane foam, and analyze the foaming process, physical properties, morphologies and thermal degradation. The research shows that fly ash enhances foam synthesis without deteriorating the physical parameters of polyurethane foam.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Natural biomass-derived porous carbons from buckwheat hulls used as anode for lithium-ion batteries

Kaifeng Yu et al.

Summary: The study prepared porous carbon materials using buckwheat hulls and CaCl2, showing excellent electrochemical performance and providing a new option for negative electrode materials for lithium-ion batteries.

DIAMOND AND RELATED MATERIALS (2021)

Add to Collection

Article Polymer Science

Synthesis and characterization of flame-retardant rigid polyurethane foams derived from gutter oil biodiesel

Guangxu Bo et al.

Summary: The study successfully synthesized gutter oil biodiesel-based polyols (GOBP) and a reactive-type flame retardant named diethyl bis(2-hydroxyethyl)-aminomethylphosphonate (BHAPE), and prepared flame-retardant rigid polyurethane foams (BPUFs) using these materials. The BPUFs showed promising properties such as low density, low thermal conductivity, high compressive strength, good flame retardancy, and thermal stability, making them potential biomaterials for fire insulation porous materials in future architecture applications.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Polymer Science

Natural cork agglomerate enabled mechanically robust rigid polyurethane foams with outstanding viscoelastic damping properties

Sung Jun Park et al.

Summary: The study found that natural cork particles can effectively tailor the viscoelastic properties of composite foams, with Cork/PU composite foams showing an increase in both storage and loss moduli, which is typically compromised for each other.

POLYMER (2021)

Add to Collection

Article Chemistry, Physical

Fly Ash as an Eco-Friendly Filler for Rigid Polyurethane Foams Modification

Monika Kuznia et al.

Summary: The research results indicate that adding fly ash within 10 wt.% significantly improves most performance parameters in rigid polyurethane foam, while using more than 20 wt.% of microspheres can enhance the mechanical and thermal properties as well as the thermal stability of the foam.

MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Bio-waste sunflower husks powder based recycled triboelectric nanogenerator for energy harvesting

Rayyan Ali Shaukat et al.

Summary: A triboelectric nanogenerator (SFP-TENG) based on bio-waste sunflower husk powder is proposed in this paper, which can harvest biomechanical energy from human body motions and light up LED lights, also demonstrating good performance under different humidity conditions.

ENERGY REPORTS (2021)

Add to Collection

Article Chemistry, Physical

Magnetic hydrochar nanocomposite obtained from sunflower husk: A potential material for environmental remediation

Aura Alejandra Burbano Patino et al.

Summary: A novel magnetic hydrochar was synthesized by hydrothermal carbonization of sunflower husk, exhibiting superparamagnetic properties and mesoporous characteristics, with the main interaction mechanism between the magnetite nanoparticles and hydrochar matrix being coulombic interactions.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Natural fillers as reinforcement for closed-molded polyurethane foam plaques: Mechanical, morphological, and thermal properties

Syed Muhammad Husainie et al.

Summary: Natural fillers like cellulose, chitin, hazelnut, and eggshell were added to polyurethane foam in varying percentages in this study, showing improvements in tensile strength and resilience with 1% fiber loading. However, split tear properties decreased. Morphological analysis confirmed uniform dispersion of fillers. This study supports the potential for a sustainable future by replacing synthetic fillers with natural alternatives in various industries.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Rigid polyurethane foams modified with thermoset polyester-glass fiber composite waste

Mateusz Barczewski et al.

POLYMER TESTING (2020)

Add to Collection

Article Polymer Science

Influence of silica aerogel particles on the foaming process and cellular structure of rigid polyurethane foams

Paula Cimavilla-Roman et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Polymer Science

Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam

Pablo Acuna et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

New Flame Retardant Systems Based on Expanded Graphite for Rigid Polyurethane Foams

Anna Strakowska et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to structural and rheological properties

Mateusz Barczewski et al.

POLYMER TESTING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid

Sylwia Czlonka et al.

POLYMER TESTING (2019)

Add to Collection

Article Engineering, Environmental

Fluidized bed combustion fly ash as filler in composite polyurethane materials

Monika Kuznia et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Engineering, Multidisciplinary

Quickly self-extinguishing flame retardant behavior of rigid polyurethane foams linked with phosphaphenanthrene groups

Lijun Qian et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Infrared expandometry: A novel methodology to monitor the expansion kinetics of cellular materials produced with exothermic foaming mechanisms

M. Santiago-Calvo et al.

POLYMER TESTING (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Rigid polyurethane foams reinforced with industrial potato protein

Sylwia Czlonka et al.

POLYMER TESTING (2018)

Add to Collection

Review Chemistry, Physical

Polyurethane Foams: Past, Present, and Future

Nuno V. Gama et al.

MATERIALS (2018)

Add to Collection

Article Polymer Science

Synthesis, characterization and physical properties of rigid polyurethane foams prepared with poly(propylene oxide) polyols containing graphene oxide

Mercedes Santiago-Calvo et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Thermodynamics

Effect of VS organic loads and buckwheat husk on methane production by anaerobic co-digestion of primary sludge and wheat straw

Mahmoud Elsayed et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Agricultural Engineering

The influence of rapeseed oil-based polyols on the foaming process of rigid polyurethane foams

Maria Kuranska et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Add to Collection

Article Polymer Science

Continuous flame-retardant actions of two phosphate esters with expandable graphite in rigid polyurethane foams

Wang Xi et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Article Soil Science

Effectiveness of Sunflower Seed Husk Biochar for Removing Copper Ions from Wastewater: a Comparative Study

Maher E. Saleh et al.

SOIL AND WATER RESEARCH (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Dispersion and reinforcing effect of carrot nanofibers on biopolyurethane foams

Xiaojian Zhou et al.

MATERIALS & DESIGN (2016)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Experimental studies and the chemical kinetics modelling of oxidation of hydrogen sulfide contained in biogas

Wojciech Jerzak et al.

SELECTED PAPERS FROM IX INTERNATIONAL CONFERENCE ON COMPUTATIONAL HEAT AND MASS TRANSFER (ICCHMT2016) (2016)

Add to Collection

Article Engineering, Environmental

Bioremediation of Crude Oil-Contaminated Soil By Immobilized Bacteria on an Agroindustrial Waste-Sunflower Seed Husks

Maria A. Cubitto et al.

BIOREMEDIATION JOURNAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of carbon nanofillers on flexible polyurethane foaming from a chemical and physical perspective

M. Mar Bernal et al.

RSC ADVANCES (2014)

Add to Collection

Article Engineering, Chemical

SYNGAS AS A REBURNING FUEL FOR NATURAL GAS COMBUSTION

Malgorzata Wilk et al.

CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA (2014)

Add to Collection

Article Chemistry, Physical

In situ evidence of the nanoparticle nucleating effect in polyurethane-nanoclay foamed systems

S. Pardo-Alonso et al.

SOFT MATTER (2012)

Add to Collection

Article Materials Science, Ceramics

Ash from sunflower husk as raw material for ceramic products

Nancy Quaranta et al.

CERAMICS INTERNATIONAL (2011)

Add to Collection

Article Polymer Science

Rigid polyurethane foams from a soybean oil-based Polyol

Suqin Tan et al.

POLYMER (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing tensile strength and toughness in syntactic foams through nanoclay reinforcement

Rahul R. Maharsia et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Article Polymer Science

Properties of water-blown rigid polyurethane foams with reactivity of raw materials

WJ Seo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.