4.6 Article

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating br

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Surface Modification Engineering Enabling 4.6 V Single-Crystalline Ni-Rich Cathode with Superior Long-Term Cyclability

Xin-Ming Fan et al.

Summary: The in situ modification strategy to form a uniform and conformal Li1.8Sc0.8Ti1.2(PO4)(3) (LSTP) protective layer helps to construct a robust cathode-electrolyte interphase thin film, improving stability and preventing intergranular cracks. Furthermore, the LSTP conductive modification layer enhances lithium-ion transport, leading to a high reversible capacity and good capacity retention even after multiple cycles.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Applied

B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries

Lingjun Li et al.

Summary: Ni-rich layered oxides are promising cathodes for advanced lithium-ion batteries, but their structural and interfacial stability issues hinder practical application. In this study, a B-doped and La4NiLiO8-coated LiNi0.825Co0.115Mn0.06O2 cathode was synthesized using a one-step method, and the dual-modification strategy significantly improved the stability of the structure and interface, leading to excellent cycling performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Engineering, Environmental

Highly conductive 3D structural carbon network-encapsulated Ni-rich LiNi0.8Co0.1Mn0.1O2 as depolarized and passivated cathode for lithium-ion batteries

Jeonguk Hwang et al.

Summary: In this study, a highly conductive and ethanol-dispersive 3D carbon network was successfully applied to improve the electrochemical performance of Ni-rich NCM, enhancing depolarization and achieving stable electrochemical reactions at high rates. The 3D carbon network layer also prevented electrical separation caused by micro-cracks, irreversible phase transitions, and side reactions with electrolytes, leading to a significant improvement in rate capability and cycle stability compared to bare NCM811.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Article Engineering, Environmental

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

Jianying Li et al.

Summary: A facile one-step chemical approach using nanoscale polycrystalline of solid electrolyte Li3.2Zr0.4Si0.6O3.6 (NP-LZSO) is reported for building a conductive protective coating on Ni-rich cathode LiNi0.8Co0.15Mn0.05O2 (NCM), which significantly improves cycling stability with a capacity retention rate of 79.9% over 400 cycles at 0.2C. This effective strategy provides a new insight using nanoscale polycrystalline of solid electrolyte to modify surface of nickel-rich cathodes to improve its cyclic performance.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials

Umair Nisar et al.

Summary: Surface coatings act as artificial barriers on cathode materials to mitigate detrimental side reactions and enhance electrochemical performance. The selection of appropriate coating materials and thickness is crucial, with a focus on their role in improving cycle life issues.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Structural Stability of LiNiO2 Cycled above 4.2 V

Chong S. Yoon et al.

ACS ENERGY LETTERS (2017)

Article Multidisciplinary Sciences

Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material

Jin-Myoung Lim et al.

SCIENTIFIC REPORTS (2017)

Article Nanoscience & Nanotechnology

Understanding the Degradation Mechanism of Lithium Nickel Oxide Cathodes for Li-Ion Batteries

Jing Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Advanced Concentration Gradient Cathode Material with Two-Slope for High-Energy and Safe Lithium Batteries

Byung-Beom Lim et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Article Chemistry, Physical

Improved high voltage electrochemical performance of Li2ZrO3-coated LiNi0.5Co0.2Mn0.3O2 cathode material

Ding Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Materials Science, Multidisciplinary

Nanoarchitectured LiMn2O4/Graphene/ZnO Composites as Electrodes for Lithium Ion Batteries

Saad Aziz et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)

Article Chemistry, Physical

Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes

Ji Woo Kim et al.

JOURNAL OF POWER SOURCES (2014)

Article Chemistry, Physical

Measurement of three-dimensional microstructure in a LiCoO2 positive electrode

James R. Wilson et al.

JOURNAL OF POWER SOURCES (2011)

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Article Chemistry, Multidisciplinary

Ultrathin Direct Atomic Layer Deposition on Composite Electrodes for Highly Durable and Safe Li-Ion Batteries

Yoon Seok Jung et al.

ADVANCED MATERIALS (2010)

Article Electrochemistry

Improvement of High Voltage Cycling Performances of Li[Ni1/3Co1/3Mn1/3]O-2 at 55 degrees C by a (NH4)(3)AlF6 Coating

Yang-Kook Sun et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2009)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Article Physics, Applied

Atomic-layer-deposited Al2O3 thin films with thin SiO2 layers grown by in situ O3 oxidation

SK Kim et al.

JOURNAL OF APPLIED PHYSICS (2004)