Colorimetric and fluorimetric pH sensing using polydiacetylene embedded within PVC-PCL nanofibers

The applicability of model polydiacetylenes (PDAs) in hydrogen ions sensitive optodes was tested. Nanofibers mats were electrospun using a mixture of polyvinyl chloride (PVC) and polycaprolactone (PCL) together with 10, 12-tricosadiynoic acid (TCDA) or 10,12-pentacosadiynoic acid (PCDA). After the polymerization the mats were applied in colorimetric and fluorimetric pH sensors. The PDAs were formed by photopolymerization with a UV lamp (254 nm), resulting in a change of mats color from white to dark blue. The morphology of both fiber mats is similar (SEM images), and the average diameters of fibers were estimated as equal to 228 +/- 73 and 248 +/- 61 nm for TCDA and PCDA, respectively. As the pH increases, the color of the fiber mat changes from blue to red and the process can be followed visually. The result obtained by computer image analysis showed a sigmoidal increase in the intensity of red and a decrease in the intensity of blue color with increasing pH. A similar sigmoidal response is observed for the dependence of the emission intensity on the pH. Changes in the recorded signal occur in the pH range from 7 to 8.5 or from 8 to 9.5 for mats with TCDA and PCDA, respectively. Both readout modes can be successfully used for pH sensing with proposed nanofibrous mats in the range of pH close to the physiological pH range.

Automated summary

The study tested the suitability of model polydiacetylenes (PDAs) in hydrogen ions sensitive optodes. Nanofibers mats were electrospun using a mixture of polyvinyl chloride (PVC) and polycaprolactone (PCL) together with 10, 12-tricosadiynoic acid (TCDA) or 10,12-pentacosadiynoic acid (PCDA). The PDAs were formed by photopolymerization, resulting in a color change from white to dark blue. The fiber mats exhibited a sigmoidal response to changes in pH, with the color changing from blue to red and the emission intensity decreasing with increasing pH. The proposed nanofibrous mats showed promise for pH sensing in the physiological pH range.