☆ 4.7 Article

Recent progress on key materials and technical approaches for electrochemical lithium extraction processes

DESALINATION (2023)

Related references

Note: Only part of the references are listed.

Review Green & Sustainable Science & Technology

Electrochemical technologies for lithium recovery from liquid resources: A review

Jiajia Wang et al.

Summary: With the increasing presence of electronic products with lithium-ion batteries in our daily lives, there is a growing demand for lithium that cannot be met through traditional land-based resources. This has led to a focus on recovering lithium from alternative sources such as salt lakes, geothermal brines, and even seawater, with electrochemical technologies receiving attention for their time-saving, environmentally friendly, and efficient qualities.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Engineering, Chemical

Establishment of PPy-derived carbon encapsulated LiMn2O4 film electrode and its performance for efficient Li+ electrosorption

Jia-Wei Fang et al.

Summary: A novel carbon encapsulated material LiMn2O4@Carbon/Nitrogen-4 (LMO@CN-4) film electrode with improved cycle stability and Li+ electrosorption rate was prepared by in-situ polymerization and high-temperature annealing. The modified electrode exhibited faster Li+ electrosorption, higher lithium-ion selectivity, and better stability than the unmodified electrode, with a maximum Li+ capacity of 34.57 mg/g. Additionally, the carbon encapsulation layer allowed for enhanced charge and ion transport, maintaining the charge and discharge capacity at about 80% after 50 cycles, indicating potential for lithium electrosorption from concentrated seawater.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Lithium ion sieve modified three-dimensional graphene electrode for selective extraction of lithium by capacitive deionization

Bin Hu et al.

Summary: In this study, a conductive three-dimensional lithium ion sieve electrode material was fabricated by in-situ growth of lambda-MnO2 nanosheets on 3D-rGO matrix. The material exhibited high conductivity and fast lithium ion diffusion rate, making it suitable for lithium ion extraction by capacitive deionization. The electrode showed good selectivity and high cycle stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

CNT-Strung LiMn2O4 for Lithium Extraction with High Selectivity and Stability

Xiaohong Shang et al.

Summary: A two-step strategy is reported to fabricate highly conductive and stable CNT-strung LiMn2O4 (CNT-s-LMO) electrode by stringing Mn3O4 particles with CNT and then converting the hybrids into CNT-s-LMO through hydrothermal lithiation. The resulting structure of CNT-s-LMO electrode exhibits excellent conductivity, high specific capacitance, and enhanced rate performance. The CNT-s-LMO-based HCDI cell shows a high Li+ extraction percentage in brine and outstanding lithium selectivity with exceptional cycling stability.

SMALL METHODS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Mohammad A. Alkhadra et al.

Summary: This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. They directly remove contaminants from water, enabling efficient removal of trace pollutants.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Engineering, Chemical

Metal-based adsorbents for lithium recovery from aqueous resources

Hanwei Yu et al.

Summary: This review provides a comprehensive overview of the synthesis methods, selective recovery mechanisms, and performance of metal-based adsorbents for lithium adsorption. The advantages and challenges of different adsorbents and preparation methods are discussed, and an industrial case study on the production and operation of aluminum-based adsorbent for lithium recovery is presented.

DESALINATION (2022)

Add to Collection

Article Engineering, Environmental

Pulsed electric field controlled lithium extraction process by LMO/MXene composite electrode from brines

Xiaoyu Zhao et al.

Summary: Low-cost and highly efficient extraction of lithium from brine is the key to solving energy and environmental problems for sustainable development. This study proposed two innovations in electrochemical lithium extraction technology, including the use of layered Ti3C2-MXene and LiMn2O4 electrode, and the application of pulse electric field control method. The results showed that this method achieved high selectivity for lithium extraction under low initial lithium/sodium ratios.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Review of Lithium Production and Recovery from Minerals, Brines, and Lithium-Ion Batteries

Fei Meng et al.

Summary: This paper discusses the importance of extraction and recycling of lithium, a critical element in LIBs, as well as methods and industry standards for recovery from different sources. The article points out the potential supply crisis in the future and the need for sustainable recycling technologies.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2021)

Add to Collection

Review Engineering, Chemical

A review on lithium recovery using electrochemical capturing systems

Sifani Zavahir et al.

Summary: This paper reviews the research on lithium extraction using membranes, electrochemical processes, and ESIX. The technologies show promising perspectives on separating and recovering lithium both selectively and non-selectively from simulated brine solutions and lithium salt solutions.

DESALINATION (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Lithium extraction from water lithium resources through green electrochemical-battery approaches: A comprehensive review

Ye Zhang et al.

Summary: The growing market demand for lithium, especially for applications like lithium-ion batteries, highlights the importance of lithium production. Extraction of lithium from water resources, particularly those with high Mg/Li ratios, is becoming more popular due to its low cost and abundant reserves. Among various aqueous lithium-extraction methods, the electrochemical-battery approach is considered the most promising due to its excellent lithium selectivity, high insertion capacity, low energy consumption, high reversibility, and eco-friendliness. Future research should focus on enhancing battery-system stability, process optimization, and reducing operating costs.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Lithium extraction from brine by an asymmetric hybrid capacitor composed of heterostructured lithium-rich cathode and nano-bismuth anode

Xiaoyu Zhao et al.

Summary: Efficient extraction of lithium resources from brine at a low cost is crucial for addressing energy and environmental issues. Two advances were proposed in this study: the design of a layered-spinel heterostructure lithium-rich material (LSNCM) as a Li-insertion electrode, and the preparation of nanocrystalline bismuth (ncBi) as a selective Cl- storage electrode. Both methods showed high extraction efficiency and stability, making them promising for lithium extraction.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Development of electrochemical lithium extraction based on a rocking chair system of LiMn2O4/Li1-xMn2O4: Self-driven plus external voltage driven

Zhi-Yuan Guo et al.

Summary: Selective electrosorption based on a rocking-chair system of LiMn2O4 /Li1-xMn2O4 is a promising lithium extraction technology with high efficiency and low cost of electrode equipment. By utilizing the potential difference between electrodes with different Li+ cubic sub-lattice compositions, the coupling process of self-driven plus external voltage driven was developed, leading to significant improvements in energy consumption and Li+ selectivity.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

A scalable three-dimensional porous λ-MnO2/rGO/Ca-alginate composite electroactive film with potential-responsive ion-pumping effect for selective recovery of lithium ions

Zheng Zhang et al.

Summary: The scalable three-dimensional porous composite electroactive film consisting of lambda-MnO2, rGO, and Ca-alg displayed high Li+ ion adsorption capacity and selectivity, as well as excellent electrochemical stability. By controlling the spreading area of the mixed solution, a large-scale of such composite film could be effectively fabricated, showing promise as a viable alternative for lithium ion recovery from salt lake brine.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Recent advances in magnesium/lithium separation and lithium extraction technologies from salt lake brine

Ying Sun et al.

Summary: In recent years, there has been extensive research on technologies for extracting and separating magnesium/lithium from salt lake brines, including adsorption, membrane, electrochemical, and reaction-coupled methods. While various methods have different characteristics and adaptabilities, membrane methods have attracted attention due to their low energy consumption and high separation rates.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

LiNi0.5Mn1.5O4-based hybrid capacitive deionization for highly selective adsorption of lithium from brine

Xiaohong Shang et al.

Summary: LiNi0.5Mn1.5O4 (LNMO) nanoparticles prepared through one-step solid-state sintering showed excellent selectivity and high stability in a hybrid capacitive deionization cell for lithium recovery, making it suitable for practical application, superior to LiMn2O4 (LMO).

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

An electrically switched ion exchange system with self-electrical-energy recuperation for efficient and selective LiCl separation from brine lakes

Junjian Niu et al.

Summary: A novel electrically switched ion exchange (ESIX) system with self-electrical-energy recuperation was developed to efficiently and selectively separate LiCl from brine lakes. The system demonstrated extremely low energy consumption and excellent selectivity, making it a promising alternative for LiCl recovery from brine lakes.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Lithium extraction from high Mg/Li brine via electrochemical intercalation/de-intercalation system using LiMn2O4 materials

Wenhua Xu et al.

Summary: Based on the principle of rocking-chair Lithium-Ion Batteries, a novel lithium-ion battery system utilizing LiMn2O4 cathode material has been developed for lithium extraction from various brines, showing strong adaptability and high selectivity.

DESALINATION (2021)

Add to Collection

Article Engineering, Environmental

Simultaneous and precise recovery of lithium and boron from salt lake brine by capacitive deionization with oxygen vacancy-rich CoP/Co3O4-graphene aerogel

Wei Jin et al.

Summary: This study presents a novel capacitive deionization method for efficient extraction of lithium and boron from salt lake brine, achieving high selectivity and stable recovery rates.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Electrochemical lithium recovery from brine with high Mg2+/Li+ ratio using mesoporous λ-MnO2/LiMn2O4 modified 3D graphite felt electrodes

Yingxin Mu et al.

Summary: A novel mesoporous LiMn2O4@GF electrode has been developed for the successful extraction of lithium from brines, demonstrating remarkable electrochemical activity, quick mass-transfer kinetics, and excellent stability. This provides an energy-efficient method for the recovery of Li+ from brines with high Mg2+/Li+ ratios.

DESALINATION (2021)

Add to Collection

Article Engineering, Chemical

Electrochemical system with LiMn2O4 porous electrode for lithium recovery and its kinetics

Dongfu Liu et al.

Summary: The study successfully improved the lithium recovery rate and electrode process kinetics of the LMO electrochemical system by preparing porous LiMn2O4 electrodes, significantly reducing the lithium recovery time and obtaining a solution with a low Mg/Li mass ratio.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Lithium Extraction from Brine with a High Sodium Content by Adsorption-Coupled Electrochemical Technology

Ying Sun et al.

Summary: The demand for lithium resources is increasing due to the rapid development of electronic vehicles, energy storage equipment, and other electronic products. Extracting lithium from high-sodium brines is challenging, but the adsorption-coupled electrochemical technology shows promise in significantly improving lithium extraction capability. By utilizing a membrane electrode coated with core@shell MnOx@C, the technology achieves high lithium adsorption capacity and desorption rate, providing an alternative pathway for efficient and facile lithium extraction from brines.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Preparation of Li2CO3 from high Mg2+/Li+ brines based on selective-electrodialysis with feed and bleed mode

Xiao-Chai Zhang et al.

Summary: This study developed a selective electrodialysis process for extracting lithium ions from brines, which can be optimized and improved by adjusting operational parameters. The extraction of lithium ions from bittern has economic value, and a high purity of Li2CO3 can be obtained in the S-ED process.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Layer spacing gradient (NaLi)1-xCoO2 for electrochemical Li extraction

Grant T. Hill et al.

Summary: The study found that the core Li phase and shell Na phase play critical roles in high Li to Na selectivity, with the core Li phase restricting layer spacing expansion and the shell Na phase maintaining electrode stability. Through layer spacing gradient design, high Li selectivity was achieved.

MATTER (2021)

Add to Collection

Article Engineering, Environmental

Spinel H4Ti5O12 nanotubes for Li recovery from aqueous solutions: Thermodynamics and kinetics study

Ali Shoghi et al.

Summary: H4Ti5O12 nanotubes were prepared as Li+ adsorbent through acid treatment, showing high ion-exchange capacity and specific surface area for large scale lithium extraction from aqueous resources. The adsorption process is dominated by physisorption and is consistent with the proposed mathematical model.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Electrochemistry

Semi-continuous electrochemical extraction of lithium from brine using CF-NMMO/AC asymmetric hybrid capacitors

Xiaoyu Zhao et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Green recovery of lithium from geothermal water based on a novel lithium iron phosphate electrochemical technique

Sen Sun et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Chemical

Sandwiched liquid-membrane electrodialysis: Lithium selective recovery from salt lake brines with high Mg/Li ratio

Zhongwei Zhao et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Taming wettability of lithium ion sieve via different TiO2 precursors for effective Li recovery from aqueous lithium resources

Xiaowei Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Highly selective lithium recovery from high Mg/Li ratio brines

Gui Liu et al.

DESALINATION (2020)

Add to Collection

Article Engineering, Chemical

Lithium recovery from diluted brine by means of electrochemical ion exchange in a flow-through-electrodes cell

Maria Sofia Palagonia et al.

DESALINATION (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Electrochemical separation of magnesium from solutions of magnesium and lithium chloride

Xi-Juan Pan et al.

HYDROMETALLURGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Lithium Extraction from Brine Using a Three-Dimensional Nanostructured Hybrid Inorganic-Gel Framework Electrode

Xiaoyu Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

Lithium extraction from brine in an ionic selective desalination battery

Xiaoyu Zhao et al.

DESALINATION (2020)

Add to Collection

Article Electrochemistry

Electrochemically Controlled Reversible Lithium Capture and Release Enabled by LiMn2O4 Nanorods

Ning Xie et al.

CHEMELECTROCHEM (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Charge-transfer materials for electrochemical water desalination, ion separation and the recovery of elements

Pattarachai Srimuk et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Electrochemistry

Green recovery of low concentration of lithium from geothermal water by a novel FPO/KNiFC ion pump technique

Tao Han et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Engineering, Chemical

Lithium carbonate recovery from brines using membrane electrolysis

Walter R. Torres et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Electrochemistry

Electrochemical Flow Reactor for Selective Extraction of Lithium Chloride from Natural Brines

V. C. E. Romero et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Application of a Flow-Type Electrochemical Lithium Recovery System with λ-MnO2/LiMn2O4: Experiment and Simulation

Hwajoo Joo et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

Sulfonated poly (ether ether ketone) composite cation exchange membrane for selective recovery of lithium by electrodialysis

Prem P. Sharma et al.

DESALINATION (2020)

Add to Collection

Article Engineering, Chemical

Separation of lithium and transition metals from leachate of spent lithium-ion batteries by solvent extraction method with Versatic 10

Lei Shuya et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Li extraction from model brine via electrocoagulation: Processing, kinetics, and mechanism

Ye Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

A new high-efficiency process for Li+ recovery from solutions based on LiMn2O4/λ-MnO2 materials

Dong-Fan Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Selective and Pollution-Free Electrochemical Extraction of Lithium by a Polyaniline/LixMn2O4 Cell

Along Zhao et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Engineering, Chemical

Cation exchange membrane integrated with cationic and anionic layers for selective ion separation via electrodialysis

Noor Ul Afsar et al.

DESALINATION (2019)

Add to Collection

Article Electrochemistry

A novel electroactive PPy/HKUST-1 composite film-coated electrode for the selective recovery of lithium ions with low concentrations in aqueous solutions

Peifen Wang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Engineering, Chemical

Li1-xNi0.5Mn1.5O4/Ag for electrochemical lithium recovery from brine and its optimized performance via response surface methodology

Chosel P. Lawagon et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Review Engineering, Chemical

Review of concepts and applications of electrochemical ion separation (EIONS) process

Hansun Yoon et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Study on Recovering High-Concentration Lithium Salt from Lithium-Containing Wastewater Using a Hybrid Reverse Osmosis (RO)-Electrodialysis (ED) Process

Yangbo Qiu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Novel approaches for lithium extraction from salt-lake brines: A review

Gui Liu et al.

HYDROMETALLURGY (2019)

Add to Collection

Article Engineering, Environmental

Lithium Lithium ion-selective membrane with 2D subnanometer channels

Amir Razmjou et al.

WATER RESEARCH (2019)

Add to Collection

Article Engineering, Chemical

The application of nanofiltration membrane for recovering lithium from salt lake brine

Yan Li et al.

DESALINATION (2019)

Add to Collection

Review Chemistry, Analytical

Review on the electrochemical extraction of lithium from seawater/brine

Xiaoyu Zhao et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Add to Collection

Article Engineering, Chemical

A novel H1.6Mn1.6O4/reduced graphene oxide composite film for selective electrochemical capturing lithium ions with low concentration

Qiang Wang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Numerical simulation of continuous extraction of highly concentrated Li+ from high Mg2+/Li+ ratio brines in an ion concentration polarization-based microfluidic system

Lingyan Gong et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Review Multidisciplinary Sciences

Design principles of ion selective nanostructured membranes for the extraction of lithium ions

Amir Razmjou et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Engineering, Environmental

Lithium enrichment from a simulated salt lake brine using an integrated nanofiltration-membrane distillation process

Biplob Kumar Pramanik et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Enhancing lithium ion capture by using a negatively overcharged biomass-based hybrid adsorbent

Hande Gunan-Yucel et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Electrochemistry

Effect of Current Density and Mass Loading on the Performance of a Flow-Through Electrodes Cell for Lithium Recovery

Maria Sofia Palagonia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Physical

Electrochemical methods for sustainable recovery of lithium from natural brines and battery recycling

Ernesto Julio Calvo

CURRENT OPINION IN ELECTROCHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

DFT calculations of the synergistic effect of -MnO2/graphene composites for electrochemical adsorption of lithium ions

Huixin Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Add to Collection

Article Chemistry, Analytical

Rapid and selective lithium recovery from desalination brine using an electrochemical system Electronic supplementary information (ESI) available. See DOI: 10.1039/c8em00498f

Seoni Kim et al.

ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS (2019)

Add to Collection

Article Engineering, Environmental

Li1-xNi0.33Co1/3Mn1/3O2/Ag for electrochemical lithium recovery from brine

Chosel P. Lawagon et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Review Chemistry, Physical

Electroactive ion exchange materials: current status in synthesis, applications and future prospects

Xiao Du et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Nickel Hexacyanoferrate as Suitable Alternative to Ag for Electrochemical Lithium Recovery

R. Trocoli et al.

CHEMSUSCHEM (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Batteries for lithium recovery from brines

Mauro Pasta et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.