Related references
Note: Only part of the references are listed.Atomistic modeling of interface strengthening in Al-Si eutectic alloys
Wenqian Wu et al.
ACTA MATERIALIA (2022)
A novel work hardening mechanism of nanoscale materials by grain boundary transformation
Tomotsugu Shimokawa et al.
ACTA MATERIALIA (2022)
Five decades of research on the development of eutectic as engineering materials
Chandra Sekhar Tiwary et al.
PROGRESS IN MATERIALS SCIENCE (2022)
In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure
Jing Wang et al.
MATERIALS (2022)
Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite
Xi Luo et al.
ACTA MATERIALIA (2022)
An atomistic-to-microscale computational analysis of the dislocation pileup-induced local stresses near an interface in plastically deformed two-phase materials
Yipeng Peng et al.
ACTA MATERIALIA (2022)
Plastic deformation induced microstructure transition in nano-fibrous Al-Si eutectics
Huai-Hsun Lien et al.
MATERIALS & DESIGN (2022)
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing
Jie Ren et al.
NATURE (2022)
Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.1
Ting Xiong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying
Yeon Beom Jeong et al.
COMPOSITES PART B-ENGINEERING (2021)
Deformation behavior of nanoscale Al-Al2Cu eutectics studied by in situ micropillar compression
S. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Strength and plasticity of lamellar vs. fibrous eutectic Mg-Al nanocomposites: An in-situ microcompression study
Soodabeh Azadehranjbar et al.
ACTA MATERIALIA (2021)
Surprising increase in yield stress of Mg single crystal using long-period stacking ordered nanoplates
Koji Hagihara et al.
ACTA MATERIALIA (2021)
Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates
Amit Misra et al.
MRS BULLETIN (2021)
Mechanical Behavior of Al-Al2Cu-Si and Al-Al2Cu Eutectic Alloys
Qian Lei et al.
CRYSTALS (2021)
In situ characterization of tensile behavior of laser rapid solidified Al-Si heterogeneous microstructures
Bingqiang Wei et al.
MATERIALS RESEARCH LETTERS (2021)
Co-deformation between the metallic matrix and intermetallic phases in a creep-resistant Mg-3.68Al-3.8Ca alloy
M. Zubair et al.
MATERIALS & DESIGN (2021)
Recent trends on studies of nanostructured metals
Xinghang Zhang et al.
MRS BULLETIN (2021)
Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg
P. Van Cauwenbergh et al.
SCIENTIFIC REPORTS (2021)
Exploring the transfer of plasticity across Laves phase interfaces in a dual phase magnesium alloy
Julien Guenole et al.
MATERIALS & DESIGN (2021)
In-situ study on tensile deformation and damage evolution of metastable β titanium alloy with lamellar microstructure
Jing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Control of kink-band formation in mille-feuille structured Al/Al2 Cu eutectic alloys
Koji Hagihara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy
Ying Yang et al.
NATURE (2021)
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Peijian Shi et al.
SCIENCE (2021)
Screw dislocation impingement and slip transfer at fcc-bcc semicoherent interfaces
Xiang-Yang Liu et al.
SCRIPTA MATERIALIA (2021)
Deformation of lamellar FCC-B2 nanostructures containing Kurdjumov-Sachs interfaces: Relation between interfacial structure and plasticity
Deep Choudhuri et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Interface-mediated plasticity of nanoscale Al-Al2Cu eutectics
Guisen Liu et al.
ACTA MATERIALIA (2020)
Microstructure evolution and high density of nanotwinned ultrafine Si in hypereutectic Al-Si alloy by laser surface remelting
Huai-Hsun Lien et al.
MATERIALS CHARACTERIZATION (2020)
Achieving micron-scale plasticity and theoretical strength in Silicon
Ming Chen et al.
NATURE COMMUNICATIONS (2020)
Uncovering the mechanism of dislocation interaction with nanoscale (<4 nm) interphase precipitates in microalloyed ferritic steels
Elena Pereloma et al.
MATERIALS RESEARCH LETTERS (2020)
Ultrahigh strength and plasticity in laser rapid solidified Al-Si nanoscale eutectics
Huai-Hsun Lien et al.
MATERIALS RESEARCH LETTERS (2020)
Effect of microalloying and tensile deformation on the internal structures of eutectic Si phase in Al-Si alloy
Jiqiang Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A review on nano-/ultrafine advanced eutectic alloys
Barnasree Chanda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Time-dependent plasticity in silicon microbeams mediated dislocation nucleation
Mohamed Elhebeary et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)
An overview of tailoring strain delocalization for strength-ductility synergy
Hao Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Grain boundary slip transfer classification and metric selection with artificial neural networks
Zhuowen Zhao et al.
SCRIPTA MATERIALIA (2020)
A new mechanism of strain transfer in polycrystals
F. Di Gioacchino et al.
SCIENTIFIC REPORTS (2020)
Promising properties and future trend of eutectic high entropy alloys
Yiping Lu et al.
SCRIPTA MATERIALIA (2020)
Microstructure and Mechanical Properties of BCC-FCC Eutectics in Ternary, Quaternary and Quinary Alloys From the Al-Co-Cr-Fe-Ni System
Daniel Roehrens et al.
FRONTIERS IN MATERIALS (2020)
Interpreting slip transmission through mechanically induced interface energies: a Fe-3%Si case study
K. E. Aifantis et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Slow and rapid cooling of Al-Cu-Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties
Guilherme Lisboa de Gouveia et al.
JOURNAL OF MATERIALS RESEARCH (2019)
The role of β-titanium ligaments in the deformation of dual phase titanium alloys
Tea-Sung Jun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Phase boundary anisotropy and its effects on the maze-to-lamellar transition in a directionally solidified Al-Al2Cu eutectic
U. Hecht et al.
ACTA MATERIALIA (2019)
Atomistic study of atomic structures and dislocation nucleation at Al/Al2Cu interfaces
Q. Zhou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Slip transmission assisted by Shockley partials across α/β interfaces in Ti-alloys
Pengyang Zhao et al.
ACTA MATERIALIA (2019)
Mesoscale crystal plasticity modeling of nanoscale Al-Al2Cu eutectic alloy
Guisen Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
In Situ Nano-thermomechanical Experiment Reveals Brittle to Ductile Transition in Silicon Nanowires
Guangming Cheng et al.
NANO LETTERS (2019)
Atomistic investigation into interfacial effects on the plastic response and deformation mechanisms of the pearlitic microstructure
Matthew Guziewski et al.
ACTA MATERIALIA (2019)
Structures and Mechanical Properties of Al-Al2Cu Interfaces
Guisen Liu et al.
JOM (2019)
Microstructure Solidification Maps for Al-10 Wt Pct Si Alloys
William Hearn et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression
Thomas Edward James Edwards et al.
ACTA MATERIALIA (2019)
A review of slip transfer: applications of mesoscale techniques
Abigail Hunter et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Indentation into an Al/Si composite: enhanced dislocation mobility at interface
Zhibo Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Plasticity of laser-processed nanoscale Al-Al2Cu eutectic alloy
S. J. Wang et al.
ACTA MATERIALIA (2018)
Dislocation-based strengthening mechanisms in metal-matrix nanocomposites: a molecular dynamics study of the influence of reinforcement shape in the Al-Si system
Zhibo Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity
Zebang Zheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Characteristic orientation relationships in nanoscale Al-Al2Cu Eutectic
S. J. Wang et al.
MATERIALS CHARACTERIZATION (2018)
Review on superior strength and enhanced ductility of metallic nanomaterials
I. A. Ovid'ko et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Slip transfer across gamma-TiAl lamellae in tension
Alberto Jesus Palomares-Garcia et al.
MATERIALS & DESIGN (2018)
Low-temperature intrinsic plasticity in silicon at small scales
A. Merabet et al.
ACTA MATERIALIA (2018)
Extra strengthening and work hardening in gradient nanotwinned metals
Zhao Cheng et al.
SCIENCE (2018)
Ductility and plasticity of nanostructured metals: differences and issues
Y. T. Zhu et al.
MATERIALS TODAY NANO (2018)
Strength and plasticity of nanolaminated materials
Jian Wang et al.
MATERIALS RESEARCH LETTERS (2017)
Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility
I. V. Okulov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Structural refinement and nanomechanical response of laser remelted Al-Al2Cu lamellar eutectic
Qian Lei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Strain rate dependence of the slip transfer through a penetrable high angle grain boundary in copper
N. V. Malyar et al.
SCRIPTA MATERIALIA (2017)
Effect of laser surface remelting on the microstructure and properties of Al-Al2Cu- Si ternary eutectic alloy
Bhupendera Prashanth Ramakrishnan et al.
SCIENTIFIC REPORTS (2017)
Dislocations penetrating an Al/Si interface
Zhibo Zhang et al.
AIP ADVANCES (2017)
Deformation mechanisms in Ti/TiN multilayer under compressive loading
Wei Yang et al.
ACTA MATERIALIA (2017)
Review on slip transmission criteria in experiments and crystal plasticity models
E. Bayerschen et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Jyoti Suryawanshi et al.
ACTA MATERIALIA (2016)
Microscopic mechanism on the evolution of plasticity in nanolamellar γ-Ni/Ni5Zr eutectic composites
T. Maity et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al-Si alloy
Rodrigo V. Reyes et al.
PHILOSOPHICAL MAGAZINE LETTERS (2016)
Understanding the relationship between microstructure and mechanical properties of Al-Cu-Si ultrafine eutectic composites
Jeong Tae Kim et al.
MATERIALS & DESIGN (2016)
Interface structure and the inception of plasticity in Nb/NbC nanolayered composites
I. Salehinia et al.
ACTA MATERIALIA (2015)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
On the origins of hardness of Cu-TiN nanolayered composites
S. Pathak et al.
SCRIPTA MATERIALIA (2015)
Crystallographic analysis of slip transfer mechanisms across the ferrite/cementite interface in carbon steels with fine lamellar structure
L. E. Karkina et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)
Probing the local atomic structure of Sr-modified Al-Si alloys
P. Srirangam et al.
ACTA MATERIALIA (2014)
Grain boundaries and interfaces in slip transfer
T. R. Bieler et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Insights on slip transmission at grain boundaries from atomistic simulations
Douglas E. Spearot et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Dislocation interactions with grain boundaries
Josh Kacher et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Molecular dynamics simulations of plastic deformation in Nb/NbC multilayers
I. Salehinia et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Modification Mechanism and Microstructural Characteristics of Eutectic Si in Casting Al-Si Alloys: A Review on Experimental and Numerical Studies
Ali Mazahery et al.
JOM (2014)
Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification
C. S. Tiwary et al.
JOURNAL OF APPLIED PHYSICS (2014)
Recent developments in advanced aircraft aluminium alloys
Tolga Dursun et al.
MATERIALS & DESIGN (2014)
Plastic strain localization in metals: origins and consequences
Stephen D. Antolovich et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Micro-to-nano-scale deformation mechanisms of a bimodal ultrafine eutectic composite
Seoung Wan Lee et al.
SCIENTIFIC REPORTS (2014)
In situ Nanoindentation Study of Plastic Co-deformation in Al-TiN Nanocomposites
N. Li et al.
SCIENTIFIC REPORTS (2014)
Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
Pan Ma et al.
METALS (2014)
Mapping dislocation nucleation behavior from bimetal interfaces
Irene J. Beyerlein et al.
ACTA MATERIALIA (2013)
A systematic investigation of fracture mechanisms in Al-Si based eutectic alloy-Effect of Si modification
Sudha Joseph et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Twinnability of bimetal interfaces in nanostructured composites
I. J. Beyerlein et al.
MATERIALS RESEARCH LETTERS (2013)
Slip transmission across fcc/bcc interfaces with varying interface shear strengths
J. Wang et al.
ACTA MATERIALIA (2012)
Effect of length scale on mechanical properties of Al-Cu eutectic alloy
C. S. Tiwary et al.
APPLIED PHYSICS LETTERS (2012)
Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X
Wael Z. Abuzaid et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Top-down fabricated silicon nanowires under tensile elastic strain up to 4.5%
R. A. Minamisawa et al.
NATURE COMMUNICATIONS (2012)
Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire
Xiaodan Zhang et al.
ACTA MATERIALIA (2011)
Compressive flow behavior of Al-TiN multilayers at nanometer scale layer thickness
D. Bhattacharyya et al.
ACTA MATERIALIA (2011)
Multi-phase Al-based ultrafine composite with multi-scale microstructure
J. M. Park et al.
INTERMETALLICS (2010)
The effect of the flake to fiber transition in silicon morphology on the tensile properties of Al-Si eutectic alloys
T. Hosch et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
A transmission electron microscopy study of the deformation behavior underneath nanoindents in nanoscale Al-TiN multilayered composites
D. Bhattacharyya et al.
PHILOSOPHICAL MAGAZINE (2010)
In situ TEM observations of room temperature dislocation climb at interfaces in nanolayered Al/Nb composites
Nan Li et al.
SCRIPTA MATERIALIA (2010)
A new criterion for elasto-plastic transition in nanomaterials: Application to size and composite effects on Cu-Nb nanocomposite wires
Ludovic Thilly et al.
ACTA MATERIALIA (2009)
Mechanical alloying and amorphization in Cu-Nb-Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography
D. Raabe et al.
ACTA MATERIALIA (2009)
He ion irradiation damage in Al/Nb multilayers
Nan Li et al.
JOURNAL OF APPLIED PHYSICS (2009)
High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity
Jin Man Park et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Analysis of the high growth-rate transition in Al-Si eutectic solidification
T. Hosch et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Atomistic modeling of the interaction of glide dislocations with weak interfaces
J. Wang et al.
ACTA MATERIALIA (2008)
Critical shear stresses at aluminum-silicon interfaces
Alice Noreyan et al.
ACTA MATERIALIA (2008)
Role of internal stresses in co-deformed two-phase materials
CW Sinclair et al.
PHILOSOPHICAL MAGAZINE (2006)
Co-deformation of two-phase Cu-Cr alloys
CW Sinclair et al.
PHILOSOPHICAL MAGAZINE (2005)
A model for dislocation behavior during deformation of Al/Al3SC (fcc/L12)metallic multilayers
MA Phillips et al.
ACTA MATERIALIA (2003)
Optimization of toughness and strength in multiphase intermetallics
A Misra et al.
INTERMETALLICS (2001)
Plasticity in multiphase intermetallics
A Misra et al.
INTERMETALLICS (2000)