Related references
Note: Only part of the references are listed.Influence of a Pre-consolidation Treatment on the Desalination Effectiveness of a Highly Deteriorated Granite Facade of Medieval Age
Jorge Feijoo et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2023)
Study of a thermally enhanced mortar incorporating phase change materials for overheating reduction in buildings
F. Rebelo et al.
JOURNAL OF ENERGY STORAGE (2022)
Incorporation of phase change materials in an expanded clay containing mortar for indoor thermal regulation of buildings
T. Salgueiro et al.
JOURNAL OF ENERGY STORAGE (2021)
Phase change material-based thermal energy storage
Tianyu Yang et al.
CELL REPORTS PHYSICAL SCIENCE (2021)
Electroprecipitation of Magnesium and Calcium Compounds for Weathering Protection of Ornamental Rocks
Jorge Feijoo et al.
CRYSTAL GROWTH & DESIGN (2020)
Electrokinetic desalination of a farmhouse applying a proton pump approach. First in situ experience
J. Feijoo et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Verification of the application potential of the mathematical models of lyse, abrams and molinari in mortars based on cement and lime
M. T. Marvila et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Characterization of innovative mortars with direct incorporation of phase change materials
Sandra Cunha et al.
JOURNAL OF ENERGY STORAGE (2020)
Thermal properties of cement mortar with different mix proportions
P. Shafigh et al.
MATERIALES DE CONSTRUCCION (2020)
Effects of potassium ferrocyanide used for desalination on lime composite performances in different curing regimes
D. Ergenc et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Thermal energy storage cement mortar with direct incorporation of organic and inorganic phase change materials
Prathik Kulkarni et al.
INNOVATIVE INFRASTRUCTURE SOLUTIONS (2020)
Thermal performance of hybrid cement mortar-PCMs for warm climates application
Andrea Frazzica et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars
Mariaenrica Frigione et al.
MATERIALS (2019)
Nanoparticle enhanced PCM applications for intensification of thermal performance in building: A review
A. Nematpour Keshteli et al.
JOURNAL OF MOLECULAR LIQUIDS (2019)
In situ desalination of a granitic column by the electrokinetic method
Jorge Feijoo et al.
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2018)
Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation
Antonella D'Alessandro et al.
APPLIED ENERGY (2018)
The effects of DiloCarB as carbonation accelerator on the properties of lime mortars
Duygu Ergenc et al.
MATERIALS AND STRUCTURES (2018)
Differential thermal expansion as a cause of salt decay: literature review, experiments, and modelling of micro and macro effects on Anca limestone
Teresa Diaz Goncalves et al.
STUDIES IN CONSERVATION (2017)
Electrokinetic treatment to increase bearing capacity and durability of a granite
Jorge Feijoo et al.
MATERIALS AND STRUCTURES (2017)
An improved electrokinetic method to consolidate porous materials
Jorge Feijoo et al.
MATERIALS AND STRUCTURES (2017)
A general method for retrieving thermal deformation properties of microencapsulated phase change materials or other particulate inclusions in cementitious composites
Benjamin A. Young et al.
MATERIALS & DESIGN (2017)
Influence of adding phase change materials on the physical and mechanical properties of cement mortars
Sandra Cunha et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Thermal performance and cost analysis of mortars made with PCM and different binders
Sandra Cunha et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effectiveness of a novel consolidant on granite: Laboratory and in situ results
Ivan De Rosario et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of temperature on mortars with incorporation of phase change materials
Sandra Cunha et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Thermal and hygric expansion characteristics of mortars and bricks used in the dome structures of Turkish Baths from 14th and 15th centuries
Bilge Alp Guney et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Influence of the properties of granite and sandstone in the desalination process by electrokinetic technique
J. Feijoo et al.
ELECTROCHIMICA ACTA (2015)
Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material
T. Lecompte et al.
ENERGY AND BUILDINGS (2015)
Review on using microencapsulated phase change materials (PCM) in building applications
Yeliz Konuklu et al.
ENERGY AND BUILDINGS (2015)
Influence of the Type of Phase Change Materials Microcapsules on the Properties of Lime-Gypsum Thermal Mortars
Sandra Cunha et al.
ADVANCED ENGINEERING MATERIALS (2014)
Brick masonry walls with PCM macrocapsules: An experimental approach
Romeu Vicente et al.
APPLIED THERMAL ENGINEERING (2014)
Newly-designed traditional lime mortar with a phase change material as an additive
L. Ventola et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Latent heat storage in PCM containing mortars-Study of microstructural modifications
S. S. Lucas et al.
ENERGY AND BUILDINGS (2013)
Apparent Thermal Properties of Phase-Change Materials: An Analysis Using Differential Scanning Calorimetry and Impulse Method
Zbysek Pavlik et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2013)
Granite desalination using electromigration. Influence of type of granite and saline contaminant
Jorge Feijoo et al.
JOURNAL OF CULTURAL HERITAGE (2013)
Review on thermal energy storage with phase change materials (PCMs) in building applications
D. Zhou et al.
APPLIED ENERGY (2012)
Traditional organic additives improve lime mortars: New old materials for restoration and building natural stone fabrics
L. Ventola et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Determination of anisotropy to enhance the durability of natural stone
R. Fort et al.
JOURNAL OF GEOPHYSICS AND ENGINEERING (2011)
Materials used as PCM in thermal energy storage in buildings: A review
L. F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Effect of maturation time on the fresh and hardened properties of an air lime mortar
H. Paiva et al.
CEMENT AND CONCRETE RESEARCH (2010)
Dynamic characteristics and energy performance of buildings using phase change materials: A review
Na Zhu et al.
ENERGY CONVERSION AND MANAGEMENT (2009)
Optimization of a phase change material wallboard for building use
Frederic Kuznik et al.
APPLIED THERMAL ENGINEERING (2008)
Formulation and characterization of an appropriate lime-based mortar for use with a porous limestone
Kevin Beck et al.
ENVIRONMENTAL GEOLOGY (2008)
Estimating the unconfined compressive strength of intact rocks from Equotip hardness
Hisashi Aoki et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2008)
Distribution of ions of marine origin in Galicia (NW Spain) as a function of distance from the sea
B. Silva et al.
ATMOSPHERIC ENVIRONMENT (2007)
Gypsum:: a review of its role in the deterioration of building materials
A. Elena Charola et al.
ENVIRONMENTAL GEOLOGY (2007)
Influence of microfractures and porosity on the physico-mechanical properties and weathering of ornamental granites
LMO Sousa et al.
ENGINEERING GEOLOGY (2005)
Durability estimation of porous building stones from pore structure and strength
D Benavente et al.
ENGINEERING GEOLOGY (2004)
A review on energy conservation in building applications with thermal storage by latent heat using phase change materials
AM Khudhair et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
A review on phase change energy storage: materials and applications
MM Farid et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
Crystallization damage by sodium sulfate
N Tsui et al.
JOURNAL OF CULTURAL HERITAGE (2003)
Masonry repair lime-based mortars: Factors affecting the mechanical behavior
J Lanas et al.
CEMENT AND CONCRETE RESEARCH (2003)
A new electrochemical method for consolidation of porous rocks
A Bernabeu et al.
ELECTROCHEMISTRY COMMUNICATIONS (2001)
Share Paper
