Related references
Note: Only part of the references are listed.Pelletisation factors on the production of fly-ash aggregates and its performance in concrete
Kadepalli Nagendra Shivaprasad et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2023)
Systematical investigation of rheological performance regarding 3D printing process for alkali-activated materials: Effect of precursor nature
Yuning Chen et al.
CEMENT & CONCRETE COMPOSITES (2022)
Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing
Huseyin Ilcan et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Geopolymer concrete as sustainable material: A state of the art review
Furqan Farooq et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering
Aamir Mahmood et al.
POLYMERS (2021)
Influence of nano TiO2 on strength and durability properties of geopolymer concrete
K. V. S. Gopala Krishna Sastry et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Preparation of geopolymer concrete using Egyptian kaolin clay and the study of its environmental effects and economic cost
Rafik Abbas et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2020)
Geopolymers as an alternative to Portland cement: An overview
N. B. Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review
Bharat Bhushan Jindal et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
Shravan Muthukrishnan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A Review of Recent Developments and Advances in Eco-Friendly Geopolymer Concrete
Lahiba Imtiaz et al.
APPLIED SCIENCES-BASEL (2020)
Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
Matteo Sambucci et al.
JOURNAL OF COMPOSITES SCIENCE (2020)
Durability of ambient cured alumina silicate concrete based on slag/fly ash blends against sulfate environment
R. Gopalakrishnan et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
Synthesis of fly ash based geopolymer mortar considering different concentrations and combinations of alkaline activator solution
Mandeep Kaur et al.
CERAMICS INTERNATIONAL (2018)
Effect of synthesis parameters on compressive strength of fly ash-slag blended geopolymer
Subhashree Samantasinghar et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Life cycle assessment (LCA) of an alkali-activated binary concrete based on natural volcanic pozzolan: A comparative analysis to OPC concrete
Rafael Robayo-Salazar et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag
R. K. Majhi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The influence of variation in cement characteristics on workability and strength of SCC with fly ash and slag additions
Omar Almuwbber et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical and thermal properties of fly ash based geopolymers
Fenghong Fan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature
Guohao Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Sarah Al-Qutaifi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume
Ali Akbar Ramezanianpour et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Performance of sodium silicate free geopolymers from metakaolin (MK) and Rice Husk Ash (RHA): Effect on tensile strength and microstructure
Ndigui Billong et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: Reaction mechanism, engineering properties and leaching behaviors
Dengquan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Life cycle assessment of geopolymer concrete
Daniel A. Salas et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin
Mandeep Kaur et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete
Lateef N. Assi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Comparison of strength and durability characteristics of a geopolymer produced from fly ash, ground glass fiber and glass powder
H. Rashidian-Dezfouli et al.
MATERIALES DE CONSTRUCCION (2017)
Influence of Curing on the Properties of Geopolymer Mortar Made with Low Molarity Sodium Hydroxide
Sundeep Inti et al.
TRANSPORTATION IN DEVELOPING ECONOMIES (2017)
Influence of steel fibers on the mechanical properties and impact resistance of lightweight geopolymer concrete
Azizul Islam et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Fly ash-based geopolymers containing added silicate waste. A review
Nicoletta Toniolo et al.
CERAMICS INTERNATIONAL (2017)
Investigation on mechanical properties of fly ash-ground granulated blast furnace slag based self curing bio-geopolymer concrete
A. Karthik et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Excavated soil waste as fine aggregate in fly ash based geopolymer mortar
P. Priyadharshini et al.
APPLIED CLAY SCIENCE (2017)
Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Ali Rafeet et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers
Aamer Bhutta et al.
CEMENT & CONCRETE COMPOSITES (2017)
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Dibyendu Adak et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Mechanical properties of geopolymer concrete containing polyvinyl alcohol fiber exposed to high temperature
Harun Tanyildizi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8 years
Kirubajiny Pasupathy et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Alkali activated composite binders of waste silica soda lime glass and blast furnace slag: Strength as a function of the composition
Ricardo Martinez-Lopez et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash
Ghasan Fahim Huseien et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Development of geopolymer mortar under ambient temperature for in situ applications
Mohammed Haloob Al-Majidi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of adding nano-TiO2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste
Ping Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Mechanical properties of alkali activated blast furnace slag pastes reinforced with carbon fibers
J. L. Vilaplana et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete
B. Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Influence of recycled aggregate on fly ash geopolymer concrete properties
Peem Nuaklong et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Tianyu Xie et al.
CERAMICS INTERNATIONAL (2015)
Reactivity and reaction products of alkali-activated, fly ash/slag paste
N. K. Lee et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Predictions of long-term deflection of geopolymer concrete beams
C. H. Un et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of granulated lead smelter slag on strength of fly ash-based geopolymer concrete
M. Albitar et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Early age properties of low-calcium fly ash geopolymer concrete suitable for ambient curing
Pradip Nath et al.
CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE (2015)
Effect of nano-silica on strength and durability of fly ash based geopolymer mortar
D. Adak et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
J. G. Jang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes
Md Sufian Badar et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effects SiO2/Na2O molar ratio on mechanical properties and the microstructure of nano-SiO2 metakaolin-based geopolymers
Kang Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Minimising the global warming potential of clay based geopolymers
Andrew Heath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Fibre-reinforced geopolymer concrete with ambient curing for in situ applications
Mark Reed et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer
Behzad Nematollahi et al.
MATERIALS & DESIGN (2014)
The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature
Partha Sarathi Deb et al.
MATERIALS & DESIGN (2014)
A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes
F. U. A. Shaikh et al.
MATERIALS & DESIGN (2014)
The effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar
Andi Arham Adam et al.
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS (2014)
Effect of strain rate on strength properties of low-calcium fly-ash-based geopolymer mortar under dry condition
Manoj Khandelwal et al.
ARABIAN JOURNAL OF GEOSCIENCES (2013)
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
Sravanthi Puligilla et al.
CEMENT AND CONCRETE RESEARCH (2013)
Improvement of the performance of alkali activated blast furnace slag mortars with very finely ground pumice
Aylin Ozodabas et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Mortars of alkali-activated blast furnace slag with high aggregate.: binder ratios
O. Burciaga-Diaz et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete
Samuel Demie et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Binding mechanism and properties of alkali-activated fly ash/slag mortars
Maochieh Chi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Louise K. Turner et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Gum Sung Ryu et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature
N. K. Lee et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
The behaviour of steel-fibre-reinforced geopolymer concrete beams in shear
Tian Sing Ng et al.
MAGAZINE OF CONCRETE RESEARCH (2013)
Structural behavior of alkali activated fly ash concrete. Part 2: structural testing and experimental findings
Joseph Robert Yost et al.
MATERIALS AND STRUCTURES (2013)
Mechanical Properties and Microstructure of Class C Fly Ash-Based Geopolymer Paste and Mortar
Xueying Li et al.
MATERIALS (2013)
Hydration and properties of nano-TiO2 blended cement composites
Jun Chen et al.
CEMENT & CONCRETE COMPOSITES (2012)
Properties of fly ash geopolymer concrete designed by Taguchi method
Monita Olivia et al.
MATERIALS & DESIGN (2012)
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Kiatsuda Somna et al.
FUEL (2011)
An environmental evaluation of geopolymer based concrete production: reviewing current research trends
G. Habert et al.
JOURNAL OF CLEANER PRODUCTION (2011)
High-Strength Geopolymer Using Fine High-Calcium Fly Ash
P. Chindaprasirt et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)
Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete
Prabir Kumar Sarker
MATERIALS AND STRUCTURES (2011)
Compressive strength and microstructural characteristics of class C fly ash geopolymer
Xiaolu Guo et al.
CEMENT & CONCRETE COMPOSITES (2010)
Investigation on phosphogypsum-steel slag-granulated blast-furnace slag-limestone cement
Yun Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Preparation and characterisation of fly ash based geopolymer mortars
J. Temuujin et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Pavel Rovnanik
CONSTRUCTION AND BUILDING MATERIALS (2010)
Workability and strength of lignite bottom ash geopolymer mortar
Apha Sathonsalowaphak et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide
Keun-Hyeok Yang et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)
Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan
Ebrahim Najafi Kani et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Medium-term phase stability of Na2O-Al2O3-SiO2-H2O geopolymer systems
Pre De Silva et al.
CEMENT AND CONCRETE RESEARCH (2008)
Attenuated total reflectance Fourier transform infrared analysis of fly ash geopolymer gel aging
Catherine A. Rees et al.
LANGMUIR (2007)
Chemical interactions between siliceous aggregates and low-Ca alkali-activated cements
W. K. W. Lee et al.
CEMENT AND CONCRETE RESEARCH (2007)
Fly ash-based geopolymer concrete: study of slender reinforced columns
D. M. J. Sumajouw et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Bond performance of reinforcing bars in inorganic polymer concrete (IPC)
M. Sofi et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Influence of curing schedule on the integrity of geopolymers
D. S. Perera et al.
JOURNAL OF MATERIALS SCIENCE (2007)
An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash
M. Criado et al.
CEMENT AND CONCRETE RESEARCH (2007)
Mechanism of geopolymerization and factors influencing its development: a review
Divya Khale et al.
JOURNAL OF MATERIALS SCIENCE (2007)
The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers
P. Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
CK Yip et al.
CEMENT AND CONCRETE RESEARCH (2005)
Do geopolymers actually contain nanocrystalline zeolites? A reexamination of existing results
JL Provis et al.
CHEMISTRY OF MATERIALS (2005)
Nanozeolites: Synthesis, crystallization mechanism, and applications
L Tosheva et al.
CHEMISTRY OF MATERIALS (2005)
Fly ash-based geopolymer concrete
D. Hardjito et al.
AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2005)
The interface between natural siliceous aggregates and geopolymers
WKW Lee et al.
CEMENT AND CONCRETE RESEARCH (2004)
Alkaline activation of fly ashes:: NMR study of the reaction products
A Palomo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers
JGS van Jaarsveld et al.
CHEMICAL ENGINEERING JOURNAL (2002)
Sodium silicate-based, alkali-activated slag mortars Part I. Strength, hydration and microstructure
AR Brough et al.
CEMENT AND CONCRETE RESEARCH (2002)
Characterization of mullite in silicoaluminous fly ash by XRD, TEM, and 29Si MAS NMR
S Gomes et al.
CEMENT AND CONCRETE RESEARCH (2000)
Share Paper
