☆ 4.7 Article

Slope stability machine learning predictions on spatially variable random fields with and without factor of safety calculations

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

Highly efficient reliability analysis of anisotropic heterogeneous slopes: machine learning-aided Monte Carlo method

Mohammad Aminpour et al.

Summary: This paper presents a highly efficient machine learning-aided reliability technique for stochastic reliability analysis in geotechnical engineering. The proposed technique accurately predicts the probability of failure with significantly reduced computational time compared to traditional methods.

ACTA GEOTECHNICA (2023)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Advances in reliability and risk analyses of slopes in spatially variable soils: A state-of-the-art review

Shui-Hua Jiang et al.

Summary: The spatial variability of soil properties has been largely overlooked in traditional slope stability analyses. However, in the past two decades, an increasing number of research papers have focused on explicitly modeling this variability. The first phase of research primarily emphasized the importance of including spatial variability in probabilistic slope stability analysis, while the second phase witnessed rapid developments in quantitative risk assessment, computational efficiency improvement, and the utilization of site investigation and field monitoring data. This review aims to summarize these advances to guide future research directions.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Article

System reliability analysis of soil slopes using shear strength reduction and active-learning surrogate models

Tianlong Zhang et al.

Arabian Journal of Geosciences (2022)

Add to Collection

Article Engineering, Geological

Deep learning for efficient stochastic analysis with spatial variability

Xuzhen He et al.

Summary: The study introduces the use of deep learning to train models for improving computational efficiency in stochastic analysis. Training models with a large dataset allows for accurate results for new data without the need for re-training. The research shows that deep learning models have a competitive edge in complex problems and can extend their capabilities by generating more data and re-training.

ACTA GEOTECHNICA (2022)

Add to Collection

Article Engineering, Geological

Binary classification method for efficient and accurate system reliability analyses of layered soil slopes

Peng Zeng et al.

Summary: A binary classification method (BCM) was proposed to enhance the computational efficiency in slope reliability analyses. By combining judgement-based strength reduction method and active-learning support vector machine, the BCM approximated the true limit state function and calculated the probability of failure in slope systems.

GEORISK-ASSESSMENT AND MANAGEMENT OF RISK FOR ENGINEERED SYSTEMS AND GEOHAZARDS (2022)

Add to Collection

Article Geosciences, Multidisciplinary

Prediction of undrained shear strength using extreme gradient boosting and random forest based on Bayesian optimization

Wengang Zhang et al.

Summary: This study applies XGBoost and RF methods to predict the USS of soft clays, showing that these approaches outperform traditional methods. Bayesian optimization is used to determine model hyperparameters, leading to more accurate and robust models.

GEOSCIENCE FRONTIERS (2021)

Add to Collection

Article Engineering, Geological

Landslide displacement prediction using kinematics-based random forests method: A case study in Jinping Reservoir Area, China

Xinli Hu et al.

Summary: Empirical and numerical methods are commonly used for landslide movement prediction due to their ability to forecast failure time and consider influential factors. This study introduces an integrated prediction model using the Verhulst inverse function and random forest algorithm to fully consider landslide kinematics and external factors. Results demonstrate significant improvement in prediction accuracy compared to individual models, with a decrease in error rates and increased feasibility for predicting movement of other landslides.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Prediction of landslide sharp increase displacement by SVM with considering hysteresis of groundwater change

Heming Han et al.

Summary: This paper proposed a hybrid machine learning displacement prediction model based on Support Vector Machine, optimized by Particle Swarm Optimization and considering the hysteresis of groundwater level change, to accurately predict the sudden change displacement of landslide. The model showed great significance for landslide prediction and early warning by achieving high prediction accuracy and effectively capturing the deformation pattern of landslides.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Efficient reliability analysis of slopes integrating the random field method and a Gaussian process regression-based surrogate model

Bin Zhu et al.

Summary: A novel probabilistic procedure integrating Gaussian process regression-based surrogate model and random limit equilibrium method for slope stability evaluation, considering spatial variability of soil strength, is proposed. This method efficiently reduces the number of direct stability analysis calls and was shown to be accurate and feasible in three case studies.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

Add to Collection

Article Engineering, Geological

Reliability-based monitoring sensitivity analysis for reinforced slopes using BUS and subset simulation methods

Hua-Ming Tian et al.

Summary: The paper discusses the stabilization of slopes in geological and geotechnical engineering through reinforcement measures, emphasizing the importance of the effectiveness of these measures in reducing slope failure risk. It proposes an efficient reliability-based monitoring sensitivity analysis framework and illustrates it using a real reinforced slope example. The results of the study demonstrate that the method can quantify the reliability sensitivity of different monitoring variables, facilitating decision-making in selecting sensitive monitoring variables during the monitoring design of reinforced slopes.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Machine learning prediction of landslide deformation behaviour using acoustic emission and rainfall measurements

Lizheng Deng et al.

Summary: Research shows that utilizing time series measurements of acoustic emission and rainfall can predict landslide displacements, with the LASSO-ELM model performing the best in maintaining prediction accuracy within a low error range.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Novel approach to efficient slope reliability analysis in spatially variable soils

Ze-Zhou Wang et al.

Summary: The study introduces a metamodel-based method using Convolutional Neural Networks (CNNs) for efficient slope reliability analysis in spatially variable soils. By training CNNs with random field samples, the method can replace computationally demanding RF-FEM analyses for accurate predictions at a fraction of the cost. Results demonstrate the effectiveness of the proposed CNN approach in terms of computational efficiency and accuracy compared to other metamodel-based methods.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Assessment of landslide susceptibility mapping based on Bayesian hyperparameter optimization: A comparison between logistic regression and random forest

Deliang Sun et al.

Summary: This study developed and optimized two landslide susceptibility mapping models, LR and RF, using the Bayesian algorithm, and found that the RF model had better stability and predictive capability compared to the LR model with the support of the Bayesian algorithm.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Improved prediction of slope stability using a hybrid stacking ensemble method based on finite element analysis and field data

Navid Kardani et al.

Summary: The study proposed a hybrid stacking ensemble approach to enhance slope stability prediction, achieving a significant improvement compared to individual machine learning methods. The hybrid stacking ensemble method demonstrated outstanding performance in slope stability prediction.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Recurrent neural networks for complicated seismic dynamic response prediction of a slope system

Yu Huang et al.

Summary: This study focused on the prediction of slope dynamic responses in earthquake-induced landslide disasters using recurrent neural network models (including Simple-RNN, LSTM, and GRU). The results indicated that recurrent neural networks outperformed traditional methods in predicting slope dynamic responses, with LSTM and GRU models showing advantages in large data scenarios.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Geological

Deep learning-based evaluation of factor of safety with confidence interval for tunnel deformation in spatially variable soil

Jinzhang Zhang et al.

Summary: A deep learning-based method using a one-dimensional convolutional neural network (CNN) is proposed for efficient prediction of tunnel deformation in spatially variable soil. The CNN model applied to new untrained datasets showed mean squared error less than 0.02 and correlation coefficient larger than 0.96, indicating the potential to replace RFDM analysis for Monte Carlo simulations. Applying dropout to retrain the model and using the technique when performing inference helps gauge the model's confidence interval. The excellent agreement between the CNN model prediction and RFDM calculated results demonstrates the method’s potential for tunnel performance analysis in spatially variable soils.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Slope reliability analysis in spatially variable soils using sliced inverse regression-based multivariate adaptive regression spline

Zhi-Ping Deng et al.

Summary: This paper proposes a reliable analysis method for slopes based on the SIR-MARS method, which effectively solves the high dimensionality problem under spatially variable soils. By simulating the spatial variability of soil properties and establishing the relationship between soil shear strength parameters and safety factor, the method obtains accurate reliability results at a low cost.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Efficient reliability analysis considering uncertainty in random field parameters: Trained neural networks as surrogate models

Xuzhen He et al.

Summary: This paper presents an efficient reliability analysis framework using trained artificial neural networks as surrogate models for geotechnical problems with uncertain random field parameters. By generating representative outcomes through experimental design, the framework demonstrates high efficiency and accuracy in predicting bearing capacity.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Engineering, Geological

AI-powered landslide susceptibility assessment in Hong Kong

Haojie Wang et al.

Summary: The study introduces a novel AI-powered object-based landslide susceptibility assessment method that defines landslide and non-landslide objects based on historical statistics, constructs samples, and utilizes AI techniques for prediction. A comprehensive case study in Hong Kong demonstrates the superiority of this method over traditional approaches and produces territory-wide landslide susceptibility maps using AI algorithms.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Probabilistic stability analysis of earth dam slope under transient seepage using multivariate adaptive regression splines

Lin Wang et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

Add to Collection

Article Engineering, Geological

Optimization design of stabilizing piles in slopes considering spatial variability

Wenping Gong et al.

ACTA GEOTECHNICA (2020)

Add to Collection

Article Engineering, Geological

Efficient reliability analysis of earth dam slope stability using extreme gradient boosting method

Lin Wang et al.

ACTA GEOTECHNICA (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Reliable Accuracy Estimates from k-Fold Cross Validation

Tzu-Tsung Wong et al.

IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Stochastic field simulation of slope stability problems: Improvement and reduction of computational effort

Elham Mahmoudi et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Machine learning aided stochastic reliability analysis of spatially variable slopes

Xuzhen He et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Multidisciplinary Sciences

Prediction of slope failure in open-pit mines using a novel hybrid artificial intelligence model based on decision tree and evolution algorithm

Xuan-Nam Bui et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Advanced reliability analysis of slopes in spatially variable soils using multivariate adaptive regression splines

Leilei Liu et al.

GEOSCIENCE FRONTIERS (2019)

Add to Collection

Article Engineering, Geological

Estimating the rainfall threshold of a deep-seated landslide by integrating models for predicting the groundwater level and stability analysis of the slope

Zhen-lei Wei et al.

ENGINEERING GEOLOGY (2019)

Add to Collection

Article Engineering, Geological

An intelligent response surface method for analyzing slope reliability based on Gaussian process regression

Bin Zhu et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

Add to Collection

Article Construction & Building Technology

Reliability assessment on stability of tunnelling perpendicularly beneath an existing tunnel considering spatial variabilities of rock mass properties

Chen Fuyong et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Review Engineering, Geological

Probabilistic methods for unified treatment of geotechnical and geological uncertainties in a geotechnical analysis

C. Hsein Juang et al.

ENGINEERING GEOLOGY (2019)

Add to Collection

Article Engineering, Civil

Prediction of Slope Stability using Naive Bayes Classifier

Xianda Feng et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2018)

Add to Collection

Article Geosciences, Multidisciplinary

Prediction of open stope hangingwall stability using random forests

Chongchong Qi et al.

NATURAL HAZARDS (2018)

Add to Collection

Article Engineering, Geological

System Reliability Analysis of Soil Slopes Using an Advanced Kriging Metamodel and Quasi-Monte Carlo Simulation

Lei-Lei Liu et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)

Add to Collection

Article Computer Science, Information Systems

Prediction of Slope Stability Using Four Supervised Learning Methods

Yun Lin et al.

IEEE ACCESS (2018)

Add to Collection

Article Engineering, Geological

On the efficient estimation of small failure probability in slopes

Jinsong Huang et al.

LANDSLIDES (2017)

Add to Collection

Article Engineering, Geological

Landslide Susceptibility Assessment Using Bagging Ensemble Based Alternating Decision Trees, Logistic Regression and J48 Decision Trees Methods: A Comparative Study

Binh Thai Pham et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Generation of multivariate cross-correlated geotechnical random fields

H. Zhu et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Engineering, Geological

Enhancement of random finite element method in reliability analysis and risk assessment of soil slopes using Subset Simulation

Dian-Qing Li et al.

LANDSLIDES (2016)

Add to Collection

Article Engineering, Geological

Landslide susceptibility mapping using random forest, boosted regression tree, classification and regression tree, and general linear models and comparison of their performance at Wadi Tayyah Basin, Asir Region, Saudi Arabia

Ahmed Mohamed Youssef et al.

LANDSLIDES (2016)

Add to Collection

Article Engineering, Multidisciplinary

Slope reliability analysis using surrogate models via new support vector machines with swarm intelligence

Fei Kang et al.

APPLIED MATHEMATICAL MODELLING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Efficient slope reliability analysis at low-probability levels in spatially variable soils

Shui-Hua Jiang et al.

COMPUTERS AND GEOTECHNICS (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

Hybrid artificial intelligence approach based on metaheuristic and machine learning for slope stability assessment: A multinational data analysis

Nhat-Duc Hoang et al.

EXPERT SYSTEMS WITH APPLICATIONS (2016)

Add to Collection

Review Geography, Physical

Random forest in remote sensing: A review of applications and future directions

Mariana Belgiu et al.

ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Slope Collapse Prediction Using Bayesian Framework with K-Nearest Neighbor Density Estimation: Case Study in Taiwan

Min-Yuan Cheng et al.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2016)

Add to Collection

Article Geosciences, Multidisciplinary

Slope stability analysis using artificial intelligence techniques

Shakti Suman et al.

NATURAL HAZARDS (2016)

Add to Collection

Article Engineering, Geological

Evaluation of spatial soil variability in the Pearl River Estuary using CPTU data

Emanuel Bombasaro et al.

SOILS AND FOUNDATIONS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Slope stability analysis based on quantum-behaved particle swarm optimization and least squares support vector machine

Bo Li et al.

APPLIED MATHEMATICAL MODELLING (2015)

Add to Collection

Article Engineering, Geological

Failure Mechanism and Bearing Capacity of Footings Buried at Various Depths in Spatially Random Soil

Jinhui Li et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2015)

Add to Collection

Article Engineering, Mechanical

MCMC algorithms for Subset Simulation

Iason Papaioannou et al.

PROBABILISTIC ENGINEERING MECHANICS (2015)

Add to Collection

Article Engineering, Geological

Effects of anisotropy in correlation structure on the stability of an undrained clay slope

Reza Jamshidi Chenari et al.

GEORISK-ASSESSMENT AND MANAGEMENT OF RISK FOR ENGINEERED SYSTEMS AND GEOHAZARDS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Numerical methods for the discretization of random fields by means of the Karhunen-Loeve expansion

Wolfgang Betz et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

Add to Collection

Article Engineering, Geological

Slope reliability analysis considering spatially variable shear strength parameters using a non-intrusive stochastic finite element method

Shui-Hua Jiang et al.

ENGINEERING GEOLOGY (2014)

Add to Collection

Article Engineering, Geological

On the estimation of scale of fluctuation in geostatistics

M. Lloret-Cabot et al.

GEORISK-ASSESSMENT AND MANAGEMENT OF RISK FOR ENGINEERED SYSTEMS AND GEOHAZARDS (2014)

Add to Collection

Article Engineering, Geological

Characterizing geotechnical anisotropic spatial variations using random field theory

H. Zhu et al.

CANADIAN GEOTECHNICAL JOURNAL (2013)

Add to Collection

Article Engineering, Geological

Reliability-based design of rock slopes - A new perspective on design robustness

Lei Wang et al.

ENGINEERING GEOLOGY (2013)

Add to Collection

Article Geosciences, Multidisciplinary

Slope reliability analysis by updated support vector machine and Monte Carlo simulation

Shaojun Li et al.

NATURAL HAZARDS (2013)

Add to Collection

Article Computer Science, Artificial Intelligence

Evolutionary risk preference inference model using fuzzy support vector machine for road slope collapse prediction

Min-Yuan Cheng et al.

EXPERT SYSTEMS WITH APPLICATIONS (2012)

Add to Collection

Article Engineering, Geological

Stratified Response Surfaces for System Probabilistic Evaluation of Slopes

Jian Ji et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2012)

Add to Collection

Article Engineering, Geological

Practical reliability analysis of slope stability by advanced Monte Carlo simulations in a spreadsheet

Yu Wang et al.

CANADIAN GEOTECHNICAL JOURNAL (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Probabilistic analyses of a strip footing on horizontally stratified sandy deposit using advanced constitutive model

R. Suchomel et al.

COMPUTERS AND GEOTECHNICS (2011)

Add to Collection

Article Engineering, Multidisciplinary

Utilization of a least square support vector machine (LSSVM) for slope stability analysis

P. Samui et al.

SCIENTIA IRANICA (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Efficient Monte Carlo Simulation of parameter sensitivity in probabilistic slope stability analysis

Yu Wang et al.

COMPUTERS AND GEOTECHNICS (2010)

Add to Collection

Article Geography, Physical

Landslide susceptibility assessment using logistic regression and its comparison with a rock mass classification system, along a road section in the northern Himalayas (India)

Iswar Das et al.

GEOMORPHOLOGY (2010)

Add to Collection

Article Engineering, Geological

Efficient Evaluation of Reliability for Slopes with Circular Slip Surfaces Using Importance Sampling

Jianye Ching et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2009)

Add to Collection

Article Engineering, Geological

Effects of spatial variability of soil properties on slope stability

Sung Eun Cho

ENGINEERING GEOLOGY (2007)

Add to Collection

Article Engineering, Mechanical

Effects of random heterogeneity of soil properties on bearing capacity

R Popescu et al.

PROBABILISTIC ENGINEERING MECHANICS (2005)

Add to Collection

Article Engineering, Geological

Probabilistic slope stability analysis by finite elements

DV Griffiths et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2004)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Logistic regression and artificial neural network classification models: a methodology review

S Dreiseitl et al.

JOURNAL OF BIOMEDICAL INFORMATICS (2002)

Add to Collection

Article Engineering, Mechanical

Estimation of small failure probabilities in high dimensions by subset simulation

SK Au et al.

PROBABILISTIC ENGINEERING MECHANICS (2001)

Add to Collection

Article Geosciences, Multidisciplinary

Generating two-dimensional fields of autocorrelated, normally distributed parameters by the matrix decomposition technique

AI El-Kadi et al.

GROUND WATER (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.