☆ 4.7 Article

True triaxial test and PFC3D-GBM simulation study on mechanical properties and fracture evolution mechanisms of rock under high stresses

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

A new fractional-order model for time-dependent damage of rock under true triaxial stresses

Zhi Zheng et al.

Summary: This study establishes a new fractional-order damage element and a fractional-order creep damage model for rocks under true triaxial stresses, based on the understanding of their time-dependent mechanical properties. The proposed model is verified and shows good agreement with experimental results, indicating its wide applicability and rationality. The study also investigates the sensitivity of the true triaxial stress states and model parameters to creep characteristics. The research provides a theoretical basis for predicting time-dependent disasters and analyzing the long-term stability of surrounding rock in deep engineering.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2023)

Add to Collection

Article Engineering, Geological

Deformation-based support design for highly stressed ground with a focus on rockburst damage mitigation

P. K. Kaiser et al.

Summary: As mines go deeper, effective rock support becomes crucial for ground control. This article provides an overview of support design principles for brittle ground and emphasizes the importance of considering load equilibrium and deformation compatibility in the design approach.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

Add to Collection

Article Mathematics

Acoustic Emission b Value Characteristics of Granite under True Triaxial Stress

Longjun Dong et al.

Summary: The b value of acoustic emission is an important parameter for predicting rock fractures. This study analyzed the changes in b value during rock failure and investigated the characteristics of acoustic emission events. The results showed that b value calculated using the average amplitude had higher accuracy, and an interval of event counts of 200 was suggested for b value calculations. The study also found that the b value decreased before fracture and decreased with increasing confining pressure.

MATHEMATICS (2022)

Add to Collection

Article Engineering, Geological

Excavation-induced deep hard rock fracturing: Methodology and applications

Xia-Ting Feng et al.

Summary: This paper discusses key issues in rock fracturing mechanics for deep hard rock excavations, including apparatuses and methods for testing mechanical properties and fracturing behaviors, evolution mechanisms of stress-induced disasters, and established analytical theory and control methods for fracturing processes of hard rock masses.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior and failure mechanisms of cylindrical and prismatic rock specimens under various confining stresses

Zhi Zheng et al.

Summary: The differences between the deformation and failure characteristics of cylindrical and prismatic specimens are still unclear. Through analysis of marble and granite specimens, it was found that there are differences in failure mode, strain, and acoustic emission activity between the two types of specimens.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2022)

Add to Collection

Review Mining & Mineral Processing

Experimental study on the mechanical and failure behaviors of deep rock subjected to true triaxial stress: A review

Heping Xie et al.

Summary: Studying the mechanical behavior of deep rocks under true triaxial stress is crucial for the safe operation of deep rock engineering and the efficient exploitation of deep resources. Recent advancements in experimental techniques and research on true triaxial rock mechanics have greatly contributed to the rapid development in this field.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Experimental and damage constitutive study of the stress-induced post-peak deformation and brittle-ductile behaviours of prismatic deeply buried marble

Zhi Zheng et al.

Summary: This paper investigates the stress-induced brittle-ductile behavior of deeply buried rock, focusing on prismatic marble. Triaxial compression tests were conducted under different confining pressures to analyze the strength, deformation, and brittle-ductile characteristics of the marble. A method to control the brittle-ductile behavior by adjusting the key parameters (beta and B-d) affecting the pre-peak hardening rate and post-peak damage rate was proposed. The relationship between the key parameters and confining pressure was established. An elastoplastic damage constitutive relation was developed and numerically simulated. The proposed model accurately captured the stress-induced brittle-ductile behavior of deeply buried rock.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)

Add to Collection

Article Engineering, Environmental

Estimating the strength and deformation of columnar jointed rock mass based on physical model test

Xiangcheng Que et al.

Summary: The study conducted uniaxial compression tests on artificial rock specimens with different columnar structures to model the mechanical behavior of columnar jointed rock mass (CJRM). Strength and deformation anisotropy were compared and analyzed based on the structural features, with empirical relations derived to predict field mechanical parameters. The proposed empirical correlations effectively estimated the mechanical parameters of CJRM and the relation based on RQD was particularly valuable in site investigations with limited information.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A comprehensive study of single-flawed granite hydraulically fracturing with laboratory experiments and flat-jointed bonded particle modeling

Rui Zhang et al.

Summary: Understanding the mechanisms of crack initiation and development is crucial for the practical engineering applications of hydraulic fracturing. The study conducted hydraulic fracturing experiments on granite specimens with pre-existing flaws, and analyzed the failure processes using digital image correlation. The research revealed two stages in the fracturing process: isolated strain localization and continuous high tensile strain path.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Engineering, Geological

A statistical index indicating the degree and mechanical effects of grain size heterogeneity in rocks

Zhenhua Han et al.

Summary: An improved grain size heterogeneity index H-e was proposed to better analyze the rock mechanical properties. The study found that both grain size heterogeneity and material heterogeneity have significant impacts on the strength and evolution of microcracks in rocks.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Numerical analysis of the brittle-ductile transition of deeply buried marble using a discrete approach

Yiping Zhang et al.

Summary: The study focuses on the mechanical properties of marble under high geostress conditions using the PFC/PBM numerical method, achieving a successful brittle-ductile transition in laboratory tests. A servo velocity threshold function of axial loading speed and confining pressure was obtained, and applied in the excavation of typical underground caverns. The effects of constrained velocity and geostress level on surrounding rock failure models were described and analyzed.

COMPUTATIONAL PARTICLE MECHANICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Numerical study on the formation of pressure arch in bolted gravel plate

Xiaoqing Wang et al.

Summary: A study was conducted using a sophisticated model and 3D particle flow code to explore the formation and influencing factors of pressure arches in bolted gravel. It was found that pressure arches are formed through interlocking between gravel particles, providing stability for the gravel below. Recommendations were made for rockbolt support in highly fractured rock in mining roadways based on the study's findings.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Chemistry, Physical

Experimental Study on Coupling Influence of Temperature and Confining Pressure to Deformation and Strength Characteristics of Rock-like Material with Pre-Existing Crack

Hongwei Wang et al.

Summary: The study revealed that temperature and confining pressure influenced the destructive characteristics of rock-like material, with an increase in confining pressure leading to higher strength and peak strain in the material. The combined effect of pre-existing cracks, temperature, and confining pressure resulted in a more complex mechanism of soft rock deformation.

MATERIALS (2021)

Add to Collection

Article Engineering, Geological

Influence of grain size on strength of polymineralic crystalline rock: New insights from DEM grain-based modeling

Jun Peng et al.

Summary: The research shows that the strength of rock increases with the grain size in the rock model, as larger grain size reduces the number of grain interfaces leading to higher rock strength. By degrading grain boundary parameters with increasing grain size, a plausible explanation is provided for the grain size effect on rock strength.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Experimental Study on Strain Burst Characteristics of Sandstone Under True Triaxial Loading and Double Faces Unloading in One Direction

Manchao He et al.

Summary: The commonalities of the two types of strain burst experiments include approximately equal failure stress and dissipation energy percentage, similar evolution of mean velocity of the free face, and consistent subregions of the fracture showing shear, buckling, splitting, and ejection zones. Unloading double faces resulted in a higher strain burst intensity, with larger initial ejection velocity, burst pit volume, and lower peak frequency, as well as more obvious features of flaky and massive fragments and more shear microcracks compared to unloading single face.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Post-peak deformation and failure behaviour of Jinping marble under true triaxial stresses

Zhi Zheng et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Correlative core- to pore-scale imaging of shales

Jan Goral et al.

MARINE AND PETROLEUM GEOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical investigation of micro-cracking behavior of brittle rock containing a pore-like flaw under uniaxial compression

Louis Ngai Yuen Wong et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2020)

Add to Collection

Article Geochemistry & Geophysics

Rupture Of Veined Granite In Polyaxial Compression: Insights From Three-Dimensional Discrete Element Method Modeling

Junlong Shang

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2020)

Add to Collection

Article Engineering, Geological

A 3D Grain-Based Model for Simulating the Micromechanical Behavior of Salt Rock

Huan Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A new semi-numerical method for elastoplastic analysis of a circular tunnel excavated in a Hoek-Brown strain-softening rock mass considering the blast-induced damaged zone

Mohammad Reza Zareifard

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

An in situ monitoring campaign of a hard rock pillar at great depth within a Canadian mine

Bradley Forbes et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Add to Collection

Article Mechanics

Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression

Ruide Lei et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Construction & Building Technology

Acoustic Emission Characteristics and Failure Prediction of the Granite with Orthogonal Cracks under Compressive Loading

Yizhong Ju et al.

ADVANCES IN CIVIL ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Modelling Micro-cracking Behaviour of Pre-cracked Granite Using Grain-Based Distinct Element Model

Mahdi Saadat et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Study on the deformation and strength characteristics of hard rock under true triaxial stress state using bonded-particle model

Shihuai Zhang et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A cohesive discrete element based approach to characterizing the shear behavior of cohesive soil and clay-infilled rock joints

Mandi Saadat et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Effect of bolt configuration on the interface behaviour between a rock bolt and bond material: A comprehensive DDA investigation

Yasuhiro Yokota et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

Experimental Study of Multiple-Step Triaxial Compression for the Determination of Rock Strength Parameters

Junpeng Zou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Source analysis of acoustic emissions during granite strain burst

Yang Wang et al.

GEOMATICS NATURAL HAZARDS & RISK (2019)

Add to Collection

Article Engineering, Geological

Modeling Micro-cracking Behavior of Bukit Timah Granite Using Grain-Based Model

Jun Peng et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Review Computer Science, Interdisciplinary Applications

A review of numerical techniques approaching microstructures of crystalline rocks

Yahui Zhang et al.

COMPUTERS & GEOSCIENCES (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modeling of brittle rock failure considering inter- and intra-grain contact failures

Xin Wang et al.

COMPUTERS AND GEOTECHNICS (2018)

Add to Collection

Article Engineering, Geological

In situ observation and evaluation of zonal disintegration affected by existing fractures in deep hard rock tunneling

Xia-Ting Feng et al.

ENGINEERING GEOLOGY (2018)

Add to Collection

Article Environmental Sciences

Excavation damaged zone depths prediction for TBM-excavated roadways in deep collieries

Bin Tang et al.

ENVIRONMENTAL EARTH SCIENCES (2018)

Add to Collection

Article Engineering, Geological

Failure Characteristics of Granite Influenced by Sample Height-to-Width Ratios and Intermediate Principal Stress Under True-Triaxial Unloading Conditions

Xibing Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Optimization of FCAW Parameters for Ferrite Content in 2205 DSS Welds Based on the Taguchi Design Method

Tianqi Li et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Multidisciplinary Sciences

An Extended Grain-Based Model for Characterizing Crystalline Materials: An Example of Marble

Louis Ngai Yuen Wong et al.

ADVANCED THEORY AND SIMULATIONS (2018)

Add to Collection

Article Geochemistry & Geophysics

Gutenberg-Richter b-value maximum likelihood estimation and sample size

F. A. Nava et al.

JOURNAL OF SEISMOLOGY (2017)

Add to Collection

Article Engineering, Geological

An Experimental Method to Determine the Elastic Properties of Transversely Isotropic Rocks by a Single Triaxial Test

Yota Togashi et al.

ROCK MECHANICS AND ROCK ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A numerical study on cracking processes in limestone by the b-value analysis of acoustic emissions

Qi Zhang et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Improvements for the smooth joint contact model of the particle flow code and its applications

Mohammad Hadi Mehranpour et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates

Xiao-ping Zhang et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Engineering, Geological

A Novel Mogi Type True Triaxial Testing Apparatus and Its Use to Obtain Complete Stress-Strain Curves of Hard Rocks

Xia-Ting Feng et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Add to Collection

Article Energy & Fuels

Permeability evolution of shale under anisotropic true triaxial stress conditions

Minghui Li et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2016)

Add to Collection

Article Geochemistry & Geophysics

Failure characteristics of two porous sandstones subjected to true triaxial stresses

Xiaodong Ma et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2016)

Add to Collection

Article Mechanics

A grain based modeling study of mineralogical factors affecting strength, elastic behavior and micro fracture development during compression tests in granites

Hannes Hofmann et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Engineering, Geological

Distinct element method simulation of an analogue for a highly interlocked, non-persistently jointed rockmass

Navid Bahrani et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

Add to Collection

Article Engineering, Geological

Factors Affecting Crack Initiation in Low Porosity Crystalline Rocks

Mohsen Nicksiar et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Add to Collection

Article Multidisciplinary Sciences

Hydraulic Fracture Extending into Network in Shale: Reviewing Influence Factors and Their Mechanism

Lan Ren et al.

SCIENTIFIC WORLD JOURNAL (2014)

Add to Collection

Article Multidisciplinary Sciences

Effect of Particle Shape on Mechanical Behaviors of Rocks: A Numerical Study Using Clumped Particle Model

Guan Rong et al.

SCIENTIFIC WORLD JOURNAL (2013)

Add to Collection

Article Geochemistry & Geophysics

Extension of the Aki-Utsu b-Value Estimator for Incomplete Catalogs

Andrzej Kijko et al.

BULLETIN OF THE SEISMOLOGICAL SOCIETY OF AMERICA (2012)

Add to Collection

Article Engineering, Geological

The synthetic rock mass approach for jointed rock mass modelling

Diego Mas Ivars et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Add to Collection

Article Engineering, Geological

Experimental Study of the Brittle Behavior of Clay shale in Rapid Unconfined Compression

Florian Amann et al.

ROCK MECHANICS AND ROCK ENGINEERING (2011)

Add to Collection

Article Geochemistry & Geophysics

Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading

Hengxing Lan et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2010)

Add to Collection

Article Engineering, Geological

20 years of excavation response studies at AECL's Underground Research Laboratory

RS Read

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

Add to Collection

Article Geochemistry & Geophysics

Moment tensors and micromechanical models

JF Hazzard et al.

TECTONOPHYSICS (2002)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Identification of soil parameters by inverse analysis

R Zentar et al.

COMPUTERS AND GEOTECHNICS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.