4.7 Article

Ultra-high modulus epoxy resin reinforced by intensive hydrogen bond network: From design, synthesis, mechanism to applications

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

Ping Song et al.

Summary: With the rapid development of fifth-generation mobile communication technology and wearable electronic devices, the need for highly efficient EMI shielding materials has become crucial. In this study, a three-dimensional graphene oxide (GO) with regular honeycomb structure (GH) was constructed using sacrificial template and freeze-drying methods. Amino functionalized FeNi alloy particles (f-FeNi) were loaded onto the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel. The resulting rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt% exhibited a high EMI shielding effectiveness (EMI SE) of 46 dB, which is 5.8 times higher than that of rGO/FeNi/epoxy composites with the same mass fraction. The composites also displayed excellent thermal stability and mechanical properties.

NANO-MICRO LETTERS (2022)

Article Materials Science, Multidisciplinary

Improvement of thermal conductivities and simulation model for glass fabrics reinforced epoxy laminated composites via introducing hetero-structured BNN-30@BNNS fillers

Xuetao Shi et al.

Summary: Hetero-structured thermally conductive boron nitride and boron nitride nanosheets fillers were prepared by electrostatic self-assembly method and used to fabricate thermally conductive & electrically insulating laminated composites. These fillers showed significant improvement in thermal conductivity of epoxy composites and led to enhanced heat transfer efficiency.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Synthesize and introduce bio-based aromatic s-triazine in epoxy resin: Enabling extremely high thermal stability, mechanical properties, and flame retardancy to achieve high-performance sustainable polymers

Yu Qi et al.

Summary: A method was proposed to synthesize an aromatic s-triazine derivative from biomass feedstock, which can be employed to construct a bio-based epoxy precursor with high performance. The resulting cured epoxy presented remarkable properties, including high glass transition temperature, flexural modulus, and strength, as well as excellent intrinsic flame retardancy, surpassing commercial petroleum-based epoxy resin.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Polymer Science

Insights into the Role of Hydrogen Bonds on the Mechanical Properties of Polymer Networks

Xin Huang et al.

Summary: The density and thermodynamic characteristics of hydrogen bonds control the stiffness and stretchability of polymer networks, while the activation energy of chain motion and the recovery rate after mechanical loading depend on the kinetic aspects of the hydrogen bonds.

MACROMOLECULES (2021)

Article Engineering, Multidisciplinary

Facile synthesis of bio-based tetra-functional epoxy resin and its potential application as high-performance composite resin matrix

Yu Qi et al.

Summary: A method for synthesizing high-performance bio-based epoxy resin using magnolol was proposed, exhibiting superior thermal and material properties compared to traditional resins. This research provides new possibilities for the development of composite materials in the aerospace industry.

COMPOSITES PART B-ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Controlling the Reactivity of a Metal-Hydroxo Adduct with a Hydrogen Bond

Adedamola A. Opalade et al.

Summary: This study investigated two manganese-III-hydroxo complexes with different functional groups and found that the one capable of forming an intramolecular hydrogen bond exhibited higher reactivity due to its increased basicity. Thermodynamically, the ability to form an intramolecular hydrogen bond strongly influences the differences in reactivity between the two complexes.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Multidisciplinary

The Elusive Au(I)•••H-O Hydrogen Bond: Experimental Verification

Gyeongjin Park et al.

Summary: This study focuses on the hydrogen bonding interaction between a metallobasic gold(I) center and an OH functionality, demonstrating the authentic interaction between them. Moreover, experimental results suggest that increasing the acidity of the OH functionality may not necessarily enhance the stability of the Au(I)···H-O interaction.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Polymer Science

Utilizing the Dangling Group Effect Caused by the Cross-Linked Network Topology Transformation to Prepare High-Performance and Deformable Resins and Composites

Ji Zhou et al.

Summary: This paper presents a novel method to improve the deformability of traditional epoxy resins through topological design at the molecular level, enabling multiple enhancements in the performance of thermoset materials. Further investigations were conducted using molecular dynamics and spectroscopic techniques to study the conformational evolution and properties of these materials.

MACROMOLECULES (2021)

Article Chemistry, Multidisciplinary

Amino acids as latent curing agents and their application in fully bio-based epoxy resins

Zhen Yu et al.

Summary: A new type of bio-based latent curing agent-amino acids-was developed and applied in a one-component epoxy resin system, exhibiting enhanced performance and good degradability.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

High-Performance Polymeric Materials through Hydrogen-Bond Cross-Linking

Pingan Song et al.

ADVANCED MATERIALS (2020)

Article Engineering, Chemical

Hydrogen-Bond-Induced Crystallization in Low-Molar-Ratio Urea-Formaldehyde Resins during Synthesis

Eko Setio Wibowo et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Chemistry, Multidisciplinary

Synthesis and Characterization of High-Performance, Bio-Based Epoxy-Amine Networks Derived from Resveratrol

Michael D. Garrison et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Physical

Ultrastiff and Tough Supramolecular Hydrogels with a Dense and Robust Hydrogen Bond Network

Yan Jie Wang et al.

CHEMISTRY OF MATERIALS (2019)

Article Thermodynamics

Curing kinetics of bio-based epoxy resin-toughened DGEBA epoxy resin blend: Synthesis and characterization

Sudheer Kumar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Article Materials Science, Multidisciplinary

Effect of molecular packing and hydrogen bonding on the properties of epoxy-amido amine systems

Arun Srikanth et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Article Materials Science, Composites

Evolution of kink bands in a notched unidirectional carbon fibre-epoxy composite under four-point bending

Ying Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Physical

High-performance, command-degradable, antibacterial Schiff base epoxy thermosets: synthesis and properties

Xiwei Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Engineering, Chemical

Significantly Improving Strength and Damping Performance of Nitrile Rubber via Incorporating Sliding Graft Copolymer

Junjun Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Engineering, Chemical

Nitrogen-Free Tetrafunctional Epoxy and Its DDS-Cured High-Performance Matrix for Aerospace Applications

Tuan Liu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Engineering, Chemical

How Does the Hydrogen Bonding Interaction Influence the Properties of Furan-Based Epoxy Resins

Xiaobin Shen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Chemistry, Applied

Mechanism of modulus improvement for epoxy resin matrices: A molecular dynamics simulation

Wenqing Zhang et al.

REACTIVE & FUNCTIONAL POLYMERS (2017)

Article Engineering, Manufacturing

Nanopolydopamine coupled fluorescent nanozinc oxide reinforced epoxy nanocomposites

Chaobo Liang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Polymer Science

Polymer Free Volume and Its Connection to the Glass Transition

Ronald P. White et al.

MACROMOLECULES (2016)

Review Polymer Science

Control of reactions and network structures of epoxy thermosets

Thomas Vidil et al.

PROGRESS IN POLYMER SCIENCE (2016)

Article Polymer Science

Thermal Properties and Topology of Epoxy Networks: A Multiscale Simulation Methodology

Alexey A. Gavrilov et al.

MACROMOLECULES (2015)

Article Chemistry, Multidisciplinary

Synthesis and Properties of a Bio-Based Epoxy Resin with High Epoxy Value and Low Viscosity

Songqi Ma et al.

CHEMSUSCHEM (2014)

Article Materials Science, Composites

Carbon fiber surfaces and composite interphases

Mohit Sharma et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Article Chemistry, Analytical

Close-up view on the inner workings of two-dimensional correlation spectroscopy

Isao Noda

VIBRATIONAL SPECTROSCOPY (2012)

Article Chemistry, Physical

Electromagnetic interference shielding of graphene/epoxy composites

Jiajie Liang et al.

CARBON (2009)

Article Materials Science, Composites

Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression:: Microscopic mechanisms and modeling

Carlos Gonzalez et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Article Engineering, Manufacturing

Enhancing compressive strength of unidirectional polymeric composites using nanoclay

Arun K. Subramaniyan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)