☆ 4.7 Article

Fatigue damage modeling in laminated composite by using Rx-FEM and strength tracking method

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Predicting fatigue damage in composites subjected to general loading conditions

Mathew W. Joosten et al.

Summary: A computationally efficient fatigue analysis methodology is proposed that can predict the initiation and propagation of cracks using a cycle jump approach and a unified local fatigue cohesive zone model. The results of verification and validation experiments indicate that this method can reproduce fatigue damage initiation and evolution for different configurations and load combinations.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Chemistry, Physical

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Binkai Li et al.

Summary: This study conducted experimental and numerical research on the static and fatigue failure of hat-stringer-stiffened composite panels under four-point bending loading. A novel theoretical model was proposed and a numerical method was developed for accurate prediction. The results showed good agreement between predictions and experiments.

MATERIALS (2022)

Add to Collection

Article Mechanics

Discussions on extension of traditional cohesive element for delamination modeling of laminates used in combination with phantom node intraply elements

Chen Wang et al.

Summary: The necessity of extending cohesive element and proposing an approximate damage variable transfer algorithm for composite laminate failure study has been discussed. Validity of the extended interface element and the damage variable transfer algorithm are investigated under practical situations, concluding that further investigations are needed to deal with more complex scenarios.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

A reduced-input cohesive zone model with regularized extended finite element method for fatigue analysis of laminated composites in Abaqus

Yu-Jui Liang et al.

Summary: The cohesive zone model integrated into the Rx-FEM framework allows for accurate prediction of crack initiation and propagation using S-N stress-life curves. This method offers practical advantages over traditional Paris law in terms of simplicity and predictability by relying on intrinsic relationships between stress-life curves and crack propagation.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Mesh size objective fatigue damage propagation in laminated composites using the multiscale discrete damage theory

Zimu Su et al.

Summary: A mesh size objective multiscale modeling approach is developed for predicting fatigue failure of long fiber-reinforced composites based on the multiscale discrete damage theory. The approach achieves mesh-size objectivity by introducing a length scale operator and uses temporal multiscaling for tracking long-term fatigue damage evolution efficiently. The performance of the model is demonstrated through analysis of different laminate configurations under fatigue loading.

COMPUTATIONAL MECHANICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A continuum damage model for composite laminates: Part III-Fatigue

J. Llobet et al.

Summary: The mesoscale continuum damage model for laminated composites developed by the AMADE research group over the past 10 years has been extended for fatigue life and residual strength predictions. The model includes new functions to account for material degradation under fatigue loads and uses the cycle jump approach to reduce computational cost. Validation of the computational model was done by simulating progressive failure mechanisms of open-hole and double-edge notched specimens under various load cases in the follow-up publication.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Mechanics

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Zhaoyang Ma et al.

Summary: The C-AFEM method combined with CZM elements accurately predicts the inter-ply failure process in composite materials, demonstrating high-fidelity and robustness in modeling the failure mechanisms of composite laminates, as validated by experimental results.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

An XFEM-VCCT coupled approach for modeling mode I fatigue delamination in composite laminates under high cycle loading

Farhad Teimouri et al.

Summary: In this study, VCCT and XFEM are combined to simulate fatigue delamination growth, comparing force and displacement control methods for accuracy. Challenges and advantages of VCCT and XFEM-VCCT approaches are discussed, with XFEM-VCCT showing high accuracy and low computational time.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

Implementation of the regularized extended finite element method in Abaqus framework for fracture modeling in laminated composites

Yu-Jui Liang et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Mechanical

From S-N to the Paris law with a new mixed-mode cohesive fatigue model for delamination in composites

C. G. Davila

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Manufacturing

Delamination initiation and migration modeling in clamped tapered laminated beam specimens under static loading

Hari K. Adluru et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Mechanics

A new approach to model delamination growth in fatigue using the Virtual Crack Closure Technique without re-meshing

N. De Carvalho et al.

ENGINEERING FRACTURE MECHANICS (2019)

Add to Collection

Article Mechanics

Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness

A. Turon et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Experimental study on delamination migration in multidirectional laminates under mode II static and fatigue loading, with comparison to mode I

Yu Gong et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Manufacturing

Failure mechanisms and damage evolution of laminated composites under compression after impact (CAI): Experimental and numerical study

X. C. Sun et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Engineering, Manufacturing

An improved delamination fatigue cohesive interface model for complex three-dimensional multi-interface cases

Chongcong Tao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Engineering, Multidisciplinary

A multiscale XFEM approach to investigate the fracture behavior of bio-inspired composite materials

Andre E. Vellwock et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Mechanics

Adaptive floating node method for modelling cohesive fracture of composite materials

X. Lu et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Materials Science, Composites

Failure simulations of open-hole IM7/977-3 coupons subjected to fatigue loading using Autodesk Helius PFA

Richard W. Dalgarno et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Experimental results of fatigue testing for calibration and validation of composite progressive damage analysis methods

Stephen B. Clay et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Progressive failure simulation in laminated composites under fatigue loading by using discrete damage modeling

Endel V. Iarve et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

A continuum damage and discrete crack-based approach for fatigue response and residual strength prediction of notched laminated composites

Eugene Fang et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Engineering, Civil

Comparative study between XFEM and Hashin damage criterion applied to failure of composites

A. P. C. Duarte et al.

THIN-WALLED STRUCTURES (2017)

Add to Collection

Article Mechanics

An extended phantom node method study of crack propagation of composites under fatigue loading

Chen Wang et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Multidisciplinary

Modelling the tensile failure of composites with the floating node method

B. Y. Chen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Mechanics

An XFEM-based methodology for fatigue delamination and permeability of composites

D. M. Grogan et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Engineering, Aerospace

Strength Prediction in Open Hole Composite Laminates by Using Discrete Damage Modeling

Michael J. Swindeman et al.

AIAA JOURNAL (2013)

Add to Collection

Article Mechanics

Damage development in open-hole composite specimens in fatigue. Part 2: Numerical modelling

O. J. Nixon-Pearson et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Engineering, Multidisciplinary

Mesh-independent matrix cracking and delamination modeling in laminated composites

Endel V. Iarve et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)

Add to Collection

Article Mechanics

Mesh-independent modeling of both distributed and discrete matrix cracking in interaction with delamination in composites

F. P. van der Meer et al.

ENGINEERING FRACTURE MECHANICS (2010)

Add to Collection

Article Engineering, Aerospace

Simulation of Damage in Composites Based on Solid Finite Elements

Yuri Nikishkov et al.

JOURNAL OF THE AMERICAN HELICOPTER SOCIETY (2010)

Add to Collection

Article Engineering, Multidisciplinary

Fast integration and weight function blending in the extended finite element method

Giulio Ventura et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)

Add to Collection

Article Materials Science, Composites

Continuum Models for the Analysis of Progressive Failure in Composite Laminates

F. P. Van Der Meer et al.

JOURNAL OF COMPOSITE MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

A continuum damage model for composite laminates:: Part I -: Constitutive model

P. Maimi et al.

MECHANICS OF MATERIALS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

A continuum damage model for composite laminates:: Part II -: Computational implementation and validation

P. Maimi et al.

MECHANICS OF MATERIALS (2007)

Add to Collection

Article Materials Science, Composites

Prediction of size effects in notched laminates using continuum damage mechanics

P. P. Camanho et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Engineering, Multidisciplinary

A finite element method for the simulation of strong and weak discontinuities in solid mechanics

A Hansbo et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)

Add to Collection

Article Engineering, Multidisciplinary

Mesh independent modelling of cracks by using higher order shape functions

EV Iarve

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.