Related references
Note: Only part of the references are listed.Experimental investigation of axial compression behavior after low velocity impact of glass fiber reinforced filament wound pipes with different diameter
Dilek Soylu Gemi et al.
COMPOSITE STRUCTURES (2022)
Theoretical evaluation of the equivalent torsional rigidity of a unique GFRP-metal box-truss composite girder
Dongdong Zhang et al.
STRUCTURES (2022)
Interlaminar shear strength and failure analysis of composite laminates with double and triple hybrid configurations
Ozkan Ozbek et al.
ENGINEERING STRUCTURES (2022)
Behavior of CFRP-strengthened RC beams with circular web openings in shear zones: Numerical study
Yasin Onuralp Ozkilic et al.
STRUCTURES (2022)
A review on drilling of FML stacks with conventional and unconventional processing methods under different conditions
Mehmet Akif Dogan et al.
COMPOSITE STRUCTURES (2022)
Effect of Fiber Wrapping on Bending Behavior of Reinforced Concrete Filled Pultruded GFRP Composite Hybrid Beams
Lokman Gemi et al.
POLYMERS (2022)
An experimental study on low velocity impact performance of bolted composite joints-part 2: Influence of long-term seawater aging
Halil Burak Kaybal et al.
COMPOSITE STRUCTURES (2021)
Effects of pulling speed on structural performance of L-shaped pultruded profiles
Alexander Vedernikov et al.
COMPOSITE STRUCTURES (2021)
A progressive damage model for pressurized filament-wound hybrid composite pipe under low-velocity impact
Ammar Maziz et al.
COMPOSITE STRUCTURES (2021)
Shape memory behavior of unidirectional pultruded laminate
Roman Korotkov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Experimental, analytical and numerical investigation of pultruded GFRP composite beams infilled with hybrid FRP reinforced concrete
Lokman Gemi et al.
ENGINEERING STRUCTURES (2021)
Static behaviour of glass fibre reinforced novel composite sleepers for mainline railway track
Wahid Ferdous et al.
ENGINEERING STRUCTURES (2021)
Compressive behaviour of hollow box pultruded FRP columns with continuous-wound fibres
Omar Alajarmeh et al.
THIN-WALLED STRUCTURES (2021)
Effects of additives on the cure kinetics of vinyl ester pultrusion resins
Alexander Vedernikov et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Comparing polarized Raman spectroscopy and birefringence as probes of molecular scale alignment in 3D printed thermoplastics
Nora M. Hassan et al.
MRS COMMUNICATIONS (2021)
Effects of nano reinforcing/matrix interaction on chemical, thermal and mechanical properties of epoxy nanocomposites
Sakir Yazman et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Modeling Spring-In of L-Shaped Structural Profiles Pultruded at Different Pulling Speeds
Alexander Vedernikov et al.
POLYMERS (2021)
The effects of back-up on drilling machinability of filament wound GFRP composite pipes: Mechanical characterization and drilling tests
Sakir Yazman
JOURNAL OF MANUFACTURING PROCESSES (2021)
Modeling of cracking during pultrusion of large-size profiles
Alexander Safonov et al.
COMPOSITE STRUCTURES (2020)
The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality
Lokman Gemi et al.
COMPOSITE STRUCTURES (2020)
Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses
Emrah Madenci et al.
COMPOSITE STRUCTURES (2020)
Multiphase flow simulation in injection pultrusion with variable properties
Fausto Tucci et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Pultruded materials and structures: A review
Alexander Vedernikov et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations
Emrah Madenci et al.
COMPOSITE STRUCTURES (2020)
The effect of pulling speed on mechanical properties of pultruded kenaf fiber reinforced vinyl ester composites
A. M. Fairuz et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2018)
Mathematical simulation of pultrusion processes: A review
Alexander A. Safonov et al.
COMPOSITE STRUCTURES (2018)
X-ray computed tomography characterization of manufacturing induced defects in a glass/polyester pultruded profile
Ismet Baran et al.
COMPOSITE STRUCTURES (2018)
Static analysis of laminated composite beams based on higher-order shear deformation theory by using mixed-type finite element method
Atilla Ozutok et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Rapid and Sensitive SERS Detection of Bisphenol A Using Self-assembled Graphitic Substrates
Pei-Ying Lin et al.
SCIENTIFIC REPORTS (2017)
Effect of aging on the failure characteristics of E-glass fibers
Qingwei Wang et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Effect of linear density and yarn structure on the mechanical properties of ramie fiber yarn reinforced composites
Hao Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
The effect of process parameters on ultraviolet cured out of die bent pultrusion process
I. Tena et al.
COMPOSITES PART B-ENGINEERING (2016)
Heteroepitaxy of Ni-Based Alloys on Diamond
Roman A. Khmelnitsky et al.
CRYSTAL GROWTH & DESIGN (2016)
In situ pultrusion of vinyl ester/nano-mica matrix composites: Process feasibility and process parameters
Chin-Lung Chiang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Effect of filler loading on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites
A. M. Fairuz et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2016)
The influence of bath temperature on the properties of pultruded glass fiber reinforced rods
Sandro G. Borges et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Effects of corrosive environments on properties of pultruded GFRP plates
Peng Feng et al.
COMPOSITES PART B-ENGINEERING (2014)
Quantitative Analysis of Curing Mechanisms of Epoxy Resin by Mid- and Near-Fourier Transform Infra Red Spectroscopy
Sagar T. Cholake et al.
DEFENCE SCIENCE JOURNAL (2014)
Comparative study about heating systems for pultrusion process
F. J. G. Silva et al.
COMPOSITES PART B-ENGINEERING (2012)
Monitoring of marine mucilage formation in Italian seas investigated by infrared spectroscopy and independent component analysis
Mauro Mecozzi et al.
ENVIRONMENTAL MONITORING AND ASSESSMENT (2012)
The Unidirectional Glass Fiber Reinforced Furfuryl Alcohol for Pultrusion. II. Correlation of Processing Parameters for Optimizing the Process
Chin-Hsing Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography
Firas Awaja et al.
POLYMER DEGRADATION AND STABILITY (2009)
Analysis of pulling force during pultrusion process of phenolic foam composites
Myung Seok Yun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Analysis of bubble nucleation and growth in the pultrusion process of phenolic foam composites
Myung Seok Yun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Experimental and theoretical analysis of pulling force in pultrusion and resin injection pultrusion (RIP) - Part 1: experimental
SJ Li et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Influence of heat transfer and curing on the quality of pultruded composites. I: Experimental
SJ Li et al.
POLYMER COMPOSITES (2002)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
In situ pultrusion of urea-formaldehyde matrix composites.: I.: Processability, kinetic analysis, and dynamic mechanical properties
CH Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Heat transfer for pultrusion of a modified acrylic/glass reinforced composite
M Sarrionandia et al.
POLYMER COMPOSITES (2002)
Manufacture of fiber-reinforced composites by microwave assisted pultrusion
JM Methven et al.
POLYMER COMPOSITES (2000)
Studies of bisphenol-A-polycarbonate aging by Raman difference spectroscopy
SN Lee et al.
JOURNAL OF MOLECULAR STRUCTURE (2000)
Characterization of fatigue and combined environment on durability performance of glass/vinyl ester composite for infrastructure applications
F McBagonluri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2000)