Related references
Note: Only part of the references are listed.Delamination and compression-after-impact properties of z-pinned composite laminates reinforced with circumferentially notched z-pins
Andre Knopp et al.
COMPOSITE STRUCTURES (2022)
High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions
Zengfei Liu et al.
COMPOSITE STRUCTURES (2022)
Damage mechanisms in the CAI failure of thin z-pinned composite laminates
L. Francesconi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Experimental investigation on damage mechanisms and buckling behaviors of thin composite laminates in compression after impact
Xin Wang et al.
COMPOSITE STRUCTURES (2021)
Effect of Z-pin insertion angles on low-velocity impact mechanical response and damage mechanism of CFRP laminates with different layups
Haowei Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Experimental investigation on the double-position impact responses and damage mechanism for Z-pinned composite laminates
Binbin Liao et al.
COMPOSITE STRUCTURES (2021)
Unfolding the effects of tuft density on compression after impact properties in unidirectional carbon/epoxy composite laminates
Kundan K. Verma et al.
COMPOSITE STRUCTURES (2021)
Effect of Z-pin inclined angle on the impact damage suppression effectiveness for cross-ply composite laminates
Binbin Liao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Review of z-pinned laminates and sandwich composites
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Review of Through-the-Thickness Reinforced z-Pinned Composites
Vassilis Kostopoulos et al.
JOURNAL OF COMPOSITES SCIENCE (2020)
Damage and failure mechanism of thin composite laminates under low-velocity impact and compression-after-impact loading conditions
Hongliang Tuo et al.
COMPOSITES PART B-ENGINEERING (2019)
Effective use of metallic Z-pins for composites' through-thickness reinforcement
Beene M'membe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Impact resistance and damage tolerance of fiber reinforced composites
S. Z. H. Shah et al.
COMPOSITE STRUCTURES (2019)
An experimental and numerical investigation on low-velocity impact damage and compression-after-impact behavior of composite laminates
Hongliang Tuo et al.
COMPOSITES PART B-ENGINEERING (2019)
Analysis of the impact and compression after impact behavior of tufted laminated composites
A. T. Martins et al.
COMPOSITE STRUCTURES (2018)
Failure mechanisms and damage evolution of laminated composites under compression after impact (CAI): Experimental and numerical study
X. C. Sun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Effect of Z-pinning on the impact resistance of composite laminates with different layups
L. Francesconi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Mixed-mode I/II delamination fatigue strengthening of polymer composites using z-pins
F. Pegorin et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations
Yi Liv et al.
COMPOSITES PART B-ENGINEERING (2017)
Mode II delamination resistance of composites reinforced with inclined Z-pins
Beene M'membe et al.
MATERIALS & DESIGN (2016)
Predicting low velocity impact damage and Compression-After-Impact (CAI) behaviour of composite laminates
Wei Tan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Experimental analysis of CFRP laminates subjected to compression after impact: The role of impact-induced cracks in failure
Samuel Rivallant et al.
COMPOSITE STRUCTURES (2014)
Re-evaluation of mode I bridging traction modelling for z-pinned laminates based on experimental analysis
A. P. Mouritz et al.
COMPOSITES PART B-ENGINEERING (2014)
Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements
Samuel Rivallant et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Impact and post-impact properties of cfrp laminates reinforced with rectangular z-pins
Matthias Knaupp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Strengthening mechanics of thin and thick composite T-joints reinforced with z-pins
T. M. Koh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Effect of stitch density and stitch thread thickness on compression after impact strength and response of stitched composites
K. T. Tan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites
A. P. Mouritz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading
F. Aymerich et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
A study on low-velocity impact damage of z-pin reinforced laminates
Jin Teng et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2007)
Review of z-pinned composite laminates
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning
X. Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Compression after impact of thin composite laminates
S Sanchu-Saez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Mode II delamination toughness of z-pinned laminates\
WY Yan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Mechanisms of crack bridging by composite and metallic rods
DDR Cartie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Effect of resin and fibre properties on impact and compression after impact performance of CFRP
DDR Cartie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
The effect of delamination geometry on the compressive failure of composite laminates
GJ Short et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)