☆ 4.6 Article

Ironing effect on surface integrity and fatigue behavior during ultrasonic peening drilling of Ti-6Al-4 V

Chinese Journal of Aeronautics (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Aerospace

Influence of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Ti-6Al-4V

Guofu Gao et al.

Summary: In this study, Longitudinal-Torsional Ultrasonic Assisted Drilling (LTUAD) was used to machine Ti-6Al-4V and compared with Conventional Drilling (CD) to evaluate its feasibility. The experiment results showed that LTUAD can effectively improve chip morphology, reduce thrust force, and minimize burr height around the hole exit.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Article Mechanics

The interface temperature and its influence on surface integrity in ultrasonic-assisted drilling of CFRP/Ti stacks

Zhenyu Shao et al.

Summary: This study investigates the relationship between drilling temperature characteristics, heat damage, and surface integrity in Carbon Fiber Reinforced Plastic (CFRP)/Titanium Alloy stacks during Ultrasonic Assisted Drilling (UAD) and Conventional Drilling (CD). Results reveal a significant drop in interface temperature in UAD compared to a slight increase in CD, leading to reduced thermal damage and improved drilling performance in UAD. Through these findings, the study identifies ways to mitigate negative temperature effects in drilling processes of CFRP/Ti stacks.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Automation & Control Systems

Study on tool wear in longitudinal-torsional composite ultrasonic vibration-assisted drilling of Ti-6Al-4V alloy

Yingjian Tian et al.

Summary: The study demonstrates that longitudinal-torsional composite ultrasonic vibration-assisted drilling (LT-UAD) has significant advantages in reducing tool wear during titanium alloy drilling. Analysis of the influence of vibration amplitude, spindle speed, and feed rate has led to the determination of optimal machining parameters. Additionally, a reliable regression model has been established to accurately predict flank wear width under different machining parameters.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A study on strengthening and machining integrated ultrasonic peening drilling of Ti-6Al-4V

Yihang Liu et al.

Summary: A novel ultrasonic peening drilling (UPD) technology that combines strengthening and machining was proposed, aiming to improve fatigue resistance of holes, enhance surface quality, and increase dimensional accuracy in aircraft assembly. Feasibility experiments on Ti-6Al-4V demonstrated significantly smoother machined surfaces, narrower dimensional tolerances, increased surface micro hardness, and deeper subsurface hardening layer depth with UPD compared to conventional drilling (CD), making it a promising method for finish drilling of aircraft fastening holes.

MATERIALS & DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of surface nanocrystallization on fatigue properties of Ti?6Al?4V alloys with bimodal and lamellar structure

Conghui Zhang et al.

Summary: High-energy shot peening was used to create a nanocrystalline surface layer in Ti-6Al-4V alloy with bimodal and lamellar structure. The results showed that the bimodal structure had higher compressive residual stress and fatigue limit compared to the lamellar structure, leading to improved fatigue strength. The synergy effect of surface gradient nanostructure and compressive residual stress played a key role in enhancing the fatigue limit of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Cold expansion of rail-end-bolt holes: Finite element predictions and experimental validation by DIC and strain gauges

Giovanni Pio Pucillo et al.

Summary: This paper experimentally validated a FE model simulating the cold-expansion of rail-end-bolt holes, showing good agreement between predicted strains and those measured with experimental techniques. The results provide confidence in the model's ability to predict effective stresses and develop crack growth models in cold-expanded holes.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Multidisciplinary

Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP

Daxi Geng et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigations on the influence of cold expansion on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature

Hui Liu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Manufacturing

A feeding-directional cutting force model for end surface grinding of CFRP composites using rotary ultrasonic machining with elliptical ultrasonic vibration

Hui Wang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Review Engineering, Manufacturing

Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives

Fuda Ning et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Split sleeve cold expansion of AZ31B sheet: Microstructure, texture and residual stress

Sasan Faghih et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Engineering, Mechanical

Evaluation of different tool geometries in the finite element simulation of ultrasonic-assisted drilling of Ti6A14V

Peng Wang et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining

Hui Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Review Mechanics

Delamination formation, evaluation and suppression during drilling of composite laminates: A review

Daxi Geng et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

Effect of hole cold expansion on fatigue performance of corroded 7B04-T6 aluminium alloy

Hou Shuai et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Engineering, Mechanical

Effect of shot peening on fatigue performance of Ti2AlNb intermetallic alloy

Y. X. Chen et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Add to Collection

Article Engineering, Mechanical

Influence of work-hardening on fatigue crack growth, effective threshold and crack opening behavior in the nickel-based superalloy Inconel 718

Alexander Klumpp et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Minimization of the hole overcut and cylindricity errors during rotary ultrasonic drilling of Ti-6Al-4V

M. Nasr et al.

INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES (2018)

Add to Collection

Article Automation & Control Systems

Study on rotary ultrasonic-assisted drilling of titanium alloys (Ti6Al4V) using 8-facet drill under no cooling condition

Zhe Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Acoustics

Feasibility study of ultrasonic elliptical vibration-assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks

Daxi Geng et al.

ULTRASONICS (2017)

Add to Collection

Article Engineering, Industrial

Comparison between cavitation peening and shot peening for extending the fatigue life of a duralumin plate with a hole

Hitoshi Soyama et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Mechanical

Numerical and experimental investigation of the cold expansion process with split sleeve in titanium alloy TC4

X. Yuan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2015)

Add to Collection

Article Mechanics

Effect of residual stresses induced by cold expansion on the crack growth in 6082 aluminum alloy

Z. Semari et al.

ENGINEERING FRACTURE MECHANICS (2013)

Add to Collection

Article Engineering, Aerospace

Investigation of Surface Integrity on TC17 Titanium Alloy Treated by Square-spot Laser Shock Peening

Cao Ziwen et al.

CHINESE JOURNAL OF AERONAUTICS (2012)

Add to Collection

Article Engineering, Manufacturing

Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP)

Jing Liu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)

Add to Collection

Article Materials Science, Characterization & Testing

EN ISO 6892-1:2009 Tensile Testing: Initial Experience from the Practical Implementation of the New Standard

Johannes Aegerter et al.

MATERIALS TESTING (2011)

Add to Collection

Article Engineering, Mechanical

Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy - An experimental study

H. D. Gopalakrishna et al.

ENGINEERING FAILURE ANALYSIS (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of cold expansion on fatigue performance of open holes

J. Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Engineering, Industrial

Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve

M. E. Karabin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Design, evaluation and optimisation of cutter path strategies when high speed machining hardened mould and die materials

CK Toh

MATERIALS & DESIGN (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.