Related references
Note: Only part of the references are listed.Combustion synthesis and characterization of Li1.2Mn0.52Ni0.20Co0.08O2 cathodes for Li-Ion battery: Effect of fuel mixture and annealing temperature
Samuel O. Ajayi et al.
CERAMICS INTERNATIONAL (2022)
High-voltage performance of P2-NaxMn0.5Co0.5O2 layered cathode material
Minh Le Nguyen et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)
Hierarchical yolk-shell structured Li-rich cathode boosting cycling and voltage stabled LIBs
Yanchen Liu et al.
NANO RESEARCH (2022)
Improving the Na0.67Ni0.33Mn0.67O2 Cathode Material for High-Voltage Cyclability via Ti/Cu Codoping for Sodium-Ion Batteries
Quan Pei et al.
ACS APPLIED ENERGY MATERIALS (2022)
New insights to build Na+/vacancy disordering for high-performance P2-type layered oxide cathodes
Hu-Rong Yao et al.
NANO ENERGY (2022)
Low-cost layered oxide cathode involving cationic and anionic redox with a complete solid-solution sodium-storage behavior
Yao Wang et al.
ENERGY STORAGE MATERIALS (2022)
Spinel-type MgxMn2-yFeyO4 as a new electrode for sodium ion batteries
Alejandro Medina et al.
ELECTROCHIMICA ACTA (2022)
The NaxMnO2 materials prepared by a glycine-nitrate method as advanced cathode materials for aqueous sodium-ion rechargeable batteries
Lazar Rakocevic et al.
CERAMICS INTERNATIONAL (2021)
Vacancy-Enabled O3 Phase Stabilization for Manganese-Rich Layered Sodium Cathodes
Biwei Xiao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Unlocking anionic redox activity in O3-type sodium 3d layered oxides via Li substitution
Qing Wang et al.
NATURE MATERIALS (2021)
Tunnel-Type Sodium Manganese Oxide Cathodes for Sodium-Ion Batteries
Munseok S. Chae et al.
CHEMELECTROCHEM (2021)
P2-Na0.67Mn0.85Al0.15O2 and NaMn2O4 Blend as Cathode Materials for Sodium-Ion Batteries Using a Natural β-MnO2 Precursor
John Abou-Rjeily et al.
ACS OMEGA (2021)
High-throughput design of Na-Fe-Mn-O cathodes for Na-ion batteries
Shipeng Jia et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Improvement of electrochemical performance of Mn-Fe based compound Na0.69Mn(0.92-x)Fe0.08MgxO2
Chang Su et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Intrinsic Origin of Nonhysteretic Oxygen Capacity in Conventional Na-Excess Layered Oxides
Gwanghyeon Choi et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Spray-drying synthesis of P2-Na2/3Fe1/2Mn1/2O2 with improved electrochemical properties
Yulei Sui et al.
ADVANCED POWDER TECHNOLOGY (2020)
Deciphering the Structure-Property Relationship of Na-Mn-Co-Mg-O as a Novel High-Capacity Layered-Tunnel Hybrid Cathode and Its Application in Sodium-Ion Capacitors
Hyun-Jae Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Li-doping stabilized P2-Li0.2Na1.0Mn0.8O2 sodium ion cathode with oxygen redox activity
Youhuan Zhu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Structural Insight into the Abnormal Capacity of a Co-Substituted Tunnel-Type Na0.44MnO2 Cathode for Sodium-Ion Batteries
Wentao Zhong et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Structural Stabilization of P2-type Sodium Iron Manganese Oxides by Electrochemically Inactive Mg Substitution: Insights of Redox Behavior and Voltage Decay
Junghoon Yang et al.
CHEMSUSCHEM (2020)
Advances on Manganese-Oxide-Based Cathodes for Na-Ion Batteries
Meng Ren et al.
ENERGY & FUELS (2020)
Vacancy-Enhanced Oxygen Redox Reversibility in P3-Type Magnesium-Doped Sodium Manganese Oxide Na0.67Mg0.2Mn0.8O2
Eun Jeong Kim et al.
ACS APPLIED ENERGY MATERIALS (2020)
Chemical pressure-stabilized post spinel-NaMnSnO4 as potential cathode for sodium-ion batteries
Aditi Chiring et al.
BULLETIN OF MATERIALS SCIENCE (2020)
A novel hollow porous structure designed for Na0.44Mn2/3Co1/6Ni1/6O2 cathode material of sodium-ion batteries
Zhiwei Zhou et al.
JOURNAL OF POWER SOURCES (2020)
Enhancing structural stability of layered O3-type Na-Mn-Ni-Cu-O cathode material through copper substitution for sodium batteries
M. Kouthaman et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)
Elucidation of the high-voltage phase in the layered sodium ion battery cathode material P3-Na0.5Ni0.25Mn0.75O2
Jiatu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Controlling at Elevated Temperature the Sodium Intercalation Capacity and Rate Capability of P3-Na2/3Ni1/2Mn1/2O2 through the Selective Substitution of Nickel with Magnesium
Mariya Kalapsazova et al.
BATTERIES & SUPERCAPS (2020)
Oxygen Redox Activity through a Reductive Coupling Mechanism in the P3-Type Nickel-Doped Sodium Manganese Oxide
Eun Jeong Kim et al.
ACS APPLIED ENERGY MATERIALS (2020)
The novel P3-type layered Na0.65Mn0.75Ni0.25O2 oxides doped by non-metallic elements for high performance sodium-ion batteries
Yu Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Comprehensive Review of P2-Type Na2/3Ni1/3Mn2/3O2, a Potential Cathode for Practical Application of Na-Ion Batteries
Jiaolong Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Al2O3 coated Na0.44MnO2 as high-voltage cathode for sodium ion batteries
Yue Zhang et al.
APPLIED SURFACE SCIENCE (2019)
High-performance P2-Type Fe/Mn-based oxide cathode materials for sodium-ion batteries
Ke Tang et al.
ELECTROCHIMICA ACTA (2019)
Mitigating the voltage fading and lattice cell variations of O3-NaNi0.2Fe0.35Mn0.45O2 for high performance Na-ion battery cathode by Zn doping
Qianjiang Mao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Electronic Properties, Phase Transformation, and Anionic Redox of Monoclinic Na2MnO3 Cathode Material for Sodium-Ion Batteries: First-Principle Calculations
Xinying Gao et al.
CHEMELECTROCHEM (2019)
Improved cycle and air stability of P3-Na0.65Mn0.75Ni0.25O2 electrode for sodium-ion batteries coated with metal phosphates
Yu Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
P3 Na0.9Ni0.5Mn0.5O2 Cathode Material for Sodium Ion Batteries
Tim Risthaus et al.
CHEMISTRY OF MATERIALS (2019)
Performance of Na0.44Mn1-xMxO2 (M = Ni, Mg; 0 ≤ x ≤ 0.44) as a cathode for rechargeable sodium ion batteries
Yu Shao et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2019)
Understanding charge compensation mechanisms in Na0.56Mg0.04Ni0.19Mn0.70O2
Le Anh Ma et al.
COMMUNICATIONS CHEMISTRY (2019)
High Reversibility of Lattice Oxygen Redox Quantified by Direct Bulk Probes of Both Anionic and Cationic Redox Reactions
Kehua Dai et al.
JOULE (2019)
A novel P3-type Na2/3Mg1/3Mn2/3O2 as high capacity sodium-ion cathode using reversible oxygen redox
Bohang Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Oxygen Redox Promoted by Na Excess and Covalency in Hexagonal and Monoclinic Na2-xRuO3 Polymorphs
M. H. N. Assadi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Suppressing the Unfavorable Surface Layer Growth on Na0.44MnO2 Cathode by a NaTi2(PO4)3 Coating To Improve Cycling Stability and Ultrahigh Rate Capability
Junru Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Na2Ru1-xMnxO3 as the cathode for sodium-ion batteries
Xiang Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
New Insights into the Roles of Mg in Improving the Rate Capability and Cycling Stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for Sodium-Ion Batteries
Cheng Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Cu2+ Dual-Doped Layer-Tunnel Hybrid Na0.6Mn1-xCuxO2 as a Cathode of Sodium-Ion Battery with Enhanced Structure Stability, Electrochemical Property, and Air Stability
Ting-Ru Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Towards K-Ion and Na-Ion Batteries as Beyond Li-Ion
Kei Kubota et al.
CHEMICAL RECORD (2018)
Tuning the component ratio and corresponding sodium storage properties of layer-tunnel hybrid Na0.6Mn1-xNixO2 cathode by a simple cationic Ni2+ doping strategy
Hui Chen et al.
ELECTROCHIMICA ACTA (2018)
Controlled synthesis of Na0.44MnO2 cathode material for sodium ion batteries with superior performance through urea-based solution combustion synthesis
Nan Sheng et al.
ELECTROCHIMICA ACTA (2018)
A high-capacity P2 Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries with oxygen activity
Tim Risthaus et al.
JOURNAL OF POWER SOURCES (2018)
Interface-rich mixed P2+T phase NaxCo0.1Mn0.9O2 (0.44 <= x <= 0.7) toward fast and high capacity sodium storage
Guofeng Gao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Unexpected effects of zirconium- doping in the high performance sodium manganese- based layertunnel cathode
Jie Qu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Gaurav Assat et al.
NATURE ENERGY (2018)
On Disrupting the Na+-Ion/Vacancy Ordering in P2-Type Sodium-Manganese-Nickel Oxide Cathodes for Na+-Ion Batteries
Arturo Gutierrez et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release
Enyuan Hu et al.
NATURE ENERGY (2018)
Tunnel-structured Na0.66[Mn0.66Ti0.34]O2-xFx (x < 0.1) cathode for high performance sodium-ion batteries
Qin-Chao Wang et al.
ENERGY STORAGE MATERIALS (2018)
Structure-Induced Reversible Anionic Redox Activity in Na Layered Oxide Cathode
Xiaohui Rong et al.
JOULE (2018)
High performance manganese-based layered oxide cathodes: overcoming the challenges of sodium ion batteries
Nagore Ortiz-Vitoriano et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides
William E. Gent et al.
NATURE COMMUNICATIONS (2017)
Copper-substituted Na0.67Ni0.3-xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2-O2 phase transition
Lei Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Synthesis and Electrochemical Study of New P3 Type Layered Na0.6Ni0.25Mn0.5Co0.25O2 for Sodium-Ion Batteries
Satyanarayana Maddukuri et al.
CHEMISTRYSELECT (2017)
Structure-Electrochemical Evolution of a Mn-Rich P2 Na2/3Fe0.2Mn0.8O2 Na-Ion Battery Cathode
Wesley M. Dose et al.
CHEMISTRY OF MATERIALS (2017)
Mn-Based Cathode with Synergetic Layered-Tunnel Hybrid Structures and Their Enhanced Electrochemical Performance in Sodium Ion Batteries
Zhen-Guo Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Multiangular Rod-Shaped Na0.44MnO2 as Cathode Materials with High Rate and Long Life for Sodium-Ion Batteries
Qiannan Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Electrochemical properties of P2-type Na2/3Ni1/3Mn2/3O2 plates synthesized by spray pyrolysis process for sodium-ion batteries
Seung Yeon Lee et al.
ELECTROCHIMICA ACTA (2017)
Suppressing the P2-O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium-Ion Batteries
Peng-Fei Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Stability of Prismatic and Octahedral Coordination in Layered Oxides and Sulfides Intercalated with Alkali and Alkaline-Earth Metals
Maxwell D. Radin et al.
CHEMISTRY OF MATERIALS (2016)
Spinel manganese oxide: A high capacity positive electrode material for the sodium ion battery
Riki Kataoka et al.
ELECTROCHIMICA ACTA (2016)
Exploring reversible oxidation of oxygen in a manganese oxide
Ke Du et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries
M. Saubanere et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Explore the Effects of Microstructural Defects on Voltage Fade of Li- and Mn-Rich Cathodes
Enyuan Hu et al.
NANO LETTERS (2016)
Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance (vol 8, e266, 2016)
Shaohua Guo et al.
NPG ASIA MATERIALS (2016)
A P2-Na0.67Co0.5Mn0.5O2 cathode material with excellent rate capability and cycling stability for sodium ion batteries
Yuan-En Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Multifunctional AlPO4 Coating for Improving Electrochemical Properties of Low-Cost Li[Li0.2Fe0.1Ni0.15Mn0.55]O2 Cathode Materials for Lithium-Ion Batteries
Feng Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Interplay between Electrochemistry and Phase Evolution of the P2-type Nax(Fe1/2Mn1/2)O2 Cathode for Use in Sodium-Ion Batteries
Wei Kong Pang et al.
CHEMISTRY OF MATERIALS (2015)
Electrochemical and Structural Study of Layered P2-Type Na2/3Ni1/3Mn2/3O2 as Cathode Material for Sodium-Ion Battery
Yanfen Wen et al.
CHEMISTRY-AN ASIAN JOURNAL (2015)
P2-NaCo0.5Mn0.5O2 as a Positive Electrode Material for Sodium- Ion Batteries
Peilei Yang et al.
CHEMPHYSCHEM (2015)
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Man Huon Han et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Investigation of the NaNixMn1-xO2 (0 ≤ x ≤ 1) System for Na-Ion Battery Cathode Materials
R. Fielden et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
Eric McCalla et al.
SCIENCE (2015)
Stable layered P3/P2 Na0.66Co0.5Mn0.5O2 cathode materials for sodium-ion batteries
Xiaoqing Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Towards greener and more sustainable batteries for electrical energy storage
D. Larcher et al.
NATURE CHEMISTRY (2015)
A Honeycomb-Layered Na3Ni2SbO6: A High-Rate and Cycle-Stable Cathode for Sodium-Ion Batteries
Dingding Yuan et al.
ADVANCED MATERIALS (2014)
Electrochemical properties of a new nanocrystalline NaMn2O4 cathode for rechargeable sodium ion batteries
Moni Kanchan Datta et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2014)
Negative electrodes for Na-ion batteries
Mouad Dahbi et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Recent research progress on iron- and manganese-based positive electrode materials for rechargeable sodium batteries
Naoaki Yabuuchi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)
Synthesis and application of ultra-long Na0.44MnO2 submicron slabs as a cathode material for Na-ion batteries
Maowen Xu et al.
RSC ADVANCES (2014)
High stable post-spinel NaMn2O4 cathode of sodium ion battery
Xizheng Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Improved electron/Li-ion transport and oxygen stability of Mo-doped Li2MnO3
Yurui Gao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Phase Stability of Post-spinel Compound AMn2O4 (A = Li, Na, or Mg) and Its Application as a Rechargeable Battery Cathode
Chen Ling et al.
CHEMISTRY OF MATERIALS (2013)
Structural and electrochemical properties of Co-Mn-Mg multi-doped nickel based cathode materials LiNi0.9Co0.1-x[Mn1/2Mg1/2]xO2 for secondary lithium ion batteries
Qiang Liu et al.
ELECTROCHIMICA ACTA (2013)
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Huilin Pan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Study of the Transition Metal Ordering in Layered NaxNix/2Mn1-x/2O2 (2/3 ≤ x ≤ 1) and Consequences of Na/Li Exchange
Jordi Cabana et al.
INORGANIC CHEMISTRY (2013)
Electrode Properties of P2-Na2/3MnyCo1-yO2 as Cathode Materials for Sodium-Ion Batteries
Xianfen Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Diffusion behavior of sodium ions in Na0.44MnO2 in aqueous and non-aqueous electrolytes
Dong Jun Kim et al.
JOURNAL OF POWER SOURCES (2013)
Electrochemical behavior and structural change of spinel-type Li[LixMn2-x]O4 (x=0 and 0.2) in sodium cells
Naoaki Yabuuchi et al.
ELECTROCHIMICA ACTA (2012)
Study on the Reversible Electrode Reaction of Na1-xNi0.5Mn0.5O2 for a Rechargeable Sodium-Ion Battery
Shinichi Komaba et al.
INORGANIC CHEMISTRY (2012)
A comparison of destabilization mechanisms of the layered NaxMO2 and LixMO2 compounds upon alkali de-intercalation
Sangtae Kim et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)
Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries
Sung-Wook Kim et al.
ADVANCED ENERGY MATERIALS (2012)
Synthesis, Characterization, and Exchange Bias Effect in Single Crystalline Li0.44MnO2 Nanoribbons
Xianke Zhang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Electrochemical Properties of Monoclinic NaMnO2
Xiaohua Ma et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Stabilization of over-stoichiometric Mn4+ in layered Na2/3MnO2
R. Stoyanova et al.
JOURNAL OF SOLID STATE CHEMISTRY (2010)
Study of the potentiometric response towards sodium ions of Na0.44-xMnO2 for the development of selective sodium ion sensors
F. Sauvage et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
High-pressure synthesis and crystal structure analysis of NaMn2O4 with the calcium ferrite-type structure
J Akimoto et al.
JOURNAL OF SOLID STATE CHEMISTRY (2006)
Lithium batteries and cathode materials
MS Whittingham
CHEMICAL REVIEWS (2004)
Electroanalytical and thermal stability studies of multi-doped lithium nickel cobalt oxides
GTK Fey et al.
JOURNAL OF POWER SOURCES (2003)
Synthesis and characterization of high-temperature hexagonal P2-Na0.6MnO2 and its electrochemical behaviour as cathode in sodium cells
A Caballero et al.
JOURNAL OF MATERIALS CHEMISTRY (2002)
Issues and challenges facing rechargeable lithium batteries
JM Tarascon et al.
NATURE (2001)
In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O2
ZH Lu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)
Superlattice ordering of Mn, Ni, and Co in layered alkali transition metal oxides with P2, P3, and O3 structures
ZH Lu et al.
CHEMISTRY OF MATERIALS (2000)
Share Paper
