☆ 4.7 Article

Flexible and lightweight Kevlar composites towards flame retardant and impact resistance with excellent thermal stability

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Liquid or solid? a biologically inspired concentrated suspension for protective coating

Yuxuan Wu et al.

Summary: Thermophiles can survive in high-temperature environments due to their proteins' hydrophobic and electrostatic interactions. Inspired by this mechanism, a novel MOF-801 based shear thickening fluid (STF) with improved performance at high temperatures has been developed, replacing hydrogen bonds with hydrophobic and electrostatic interactions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Mechanics

Enhanced sandwich structure composite with shear thickening fluid and thermoplastic polyurethanes for High-performance stab resistance

Xiayun Zhang et al.

Summary: The research shows that stab-resistant composites prepared using STF and TPU have improved stab resistance performance while maintaining good flexibility. During the preparation process, the shear thickening effect of STF contributes to enhancing the performance of the composite material.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Ballistic performance of B4C/STF/Twaron composite fabric

Y. J. Xu et al.

Summary: The newly proposed bullet-proof composite fabric shows significantly improved ballistic performance, with the inter-yarn friction playing a crucial role in impact resistance. By optimizing the combination of fabrics, the overall ballistic resistance can be maximized, highlighting the importance of friction coefficient in fabric anti-impact properties.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Materials Science, Composites

Protective performance and dynamic behavior of composite body armor with shear stiffening gel as buffer material under ballistic impact

Fan Tang et al.

Summary: The impact-resistant shear stiffening gel (SSG) used as a buffer plate for body armor combined with ultra-high molecular weight polyethylene (UHMWPE) ballistic panel showed superior protective performance, with the SSG buffer plate quickly stiffening under ballistic impact to resist impact deformation and absorb impact energy, ultimately reducing the impact strength on the human body and backface signature significantly.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Organic

Ionic Liquids: Environment-friendly Greener Solvents for Organic Synthesis

Monica Dinodia

Summary: Ionic liquids, composed of ions, with high solvent power and low volatility, are being used as environmentally friendly substitutes for conventional volatile organic solvents in organic synthesis.

CURRENT ORGANIC SYNTHESIS (2022)

Add to Collection

Article Polymer Science

Flame retardant treatment of jute fabric with chitosan and sodium alginate

Shi-Qiong Li et al.

Summary: Jute fabric was treated with chitosan and sodium alginate to enhance its flame retardancy. The treated fabric exhibited a higher limiting oxygen index and reduced heat release capability.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection

Article Materials Science, Textiles

Synthesis of a phosphorus- and nitrogen-containing flame retardant and the fabrication of flame retardant cotton

Yansong Liu et al.

Summary: A novel phosphorus- and nitrogen-containing flame retardant, APNTHE, was synthesized and used for the preparation of flame retardant cotton. The results showed that the modified cotton had a high char residue and durable flame retardancy, with a significant reduction in heat release rate and total heat release. APNTHE played a flame retardant role in both the gas phase and the condensed phase.

TEXTILE RESEARCH JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Shear thickening fluids and their applications

Minghai Wei et al.

Summary: This paper provides a comprehensive review of shear thickening fluids (STFs), including their basic properties, classification, and rheological mechanism evolution. It discusses the factors influencing the shear thickening behavior of STFs and presents several computational models. Furthermore, it summarizes the research progress of STF-based composites in various fields and explores the applications of STFs in energy dissipation.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Textiles

Durable flame retardant hybrid sol-gel coating on poly(ethylene terephthalate) fabric and its flame retardant mechanism

Gu Wei et al.

Summary: The research demonstrated that the organic/inorganic phosphorus and silicon-containing coating had excellent flame retardant performance for PET fabrics, enhancing their thermal stability and char residue.

TEXTILE RESEARCH JOURNAL (2022)

Add to Collection

Article Polymer Science

A Study on Carbon Fiber Composites with Low-Melting-Point Polyester Nonwoven Fabric Reinforcement: A Highly Effective Electromagnetic Wave Shield Textile Material

Jia-Horng Lin et al.

Summary: In this study, different orders of lamination were used to create composites using a low-melting-point polyester nonwoven fabric, a nylon spacer fabric, and a carbon fiber woven fabric. Regardless of the lamination order, all four composites exhibited high tensile strengths and tearing strengths. The composites showed good electromagnetic wave shielding performance in the frequency range of 1-3 GHz. According to the test requirements for electromagnetic shielding textiles, the proposed composites achieved the highest standard and are suitable for use in aviation, construction, and commerce fields.

POLYMERS (2022)

Add to Collection

Article Materials Science, Textiles

Stab/Puncture Resistance Performance of Needle Punched Nonwoven Fabrics: Effects of Filament Reinforcement and Thermal Bonding

Xiayun Zhang et al.

Summary: This study fabricated two types of stab-resistant nonwoven fabrics and investigated the influence of fiber content and bonding mode on the stab/puncture resistance of the fabrics.

FIBERS AND POLYMERS (2022)

Add to Collection

Article Materials Science, Textiles

Synergistic Flame Retardant Effect of Organic Boron Flame Retardant and Aluminum Hydroxide on Polyethylene

Lianghui Ai et al.

Summary: The study developed an organic/inorganic synergistic flame retardant for polyethylene (PE) using CP-6B and ATH, achieving a high LOI and V-0 rating. The flame retardant mechanism was investigated through various techniques, showing the efficiency of ATH/CP-6B in both gas and condensed phases.

FIBERS AND POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of a Novel Flame Retardant Containing Phosphorus, Nitrogen, and Silicon and Its Application in Epoxy Resin

Minghui Fang et al.

Summary: A novel flame retardant containing phosphorus, nitrogen, and silicon was successfully synthesized and blended with epoxy resin to form a flame-retardant composite material with excellent thermal stability and flame retardancy. The composite material showed promising performance in industrial applications, demonstrating improved fire safety and reduced heat release compared to neat epoxy resin.

ACS OMEGA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of the ballistic protection level of (glass-fiber reinforced polyamide 6)-aramid fabric sandwich composite panels

J. C. Farias-Aguilar et al.

Summary: The ballistic efficiency of body armor manufactured using a polymer-based composite with a laminar configuration was tested, showing its capability to prevent 9mm bullet penetration and potential for use as urban level III-A armor.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Thin Film Properties of Thermally Stable Protic Ionic Liquids

Hirofumi Kondo et al.

Summary: Ionic liquids (ILs) have superior thermal stability compared to conventional lubricants, attracting interest as potential lubricants. Newly synthesized compounds showed stable low friction coefficients on carbon-coated media. Through chemical analysis and thermal degradation kinetics, ILs were found to have lower activation energy for surface physisorption compared to bulk.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2021)

Add to Collection

Article Engineering, Manufacturing

Intralayer interfacial sliding effect on the anti-impact performance of STF/Kevlar composite fabric

Junshuo Zhang et al.

Summary: This study found that impact speed and constraint conditions affect the relative intralayer interfacial sliding rate among yarns, thereby influencing the rheological state of STF and the anti-impact performance of fabric. Furthermore, a mathematical model was developed for the relationship between projectile velocity and fabric kinetic energy under strong constraints, providing design ideas for body armor with high protective performance.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Multiscale synergistic toughened pluronic/PMEA/hydroxyapatite hydrogel laminated aramid soft composites: Puncture resistance and self-healing properties

Ting-Ting Li et al.

Summary: This study constructs a multiscale selfhealing gel-fabric soft composite toughened by Pluronic/PMEA hydrogel, HAP NPs, and aramid fabric, improving stab resistance by 132% and 130%. The composite shows excellent self-repairing efficiency and puncture resistance properties, suggesting a novel structural design for high-performance puncture-resistant composites.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

The CNT/PSt-EA/Kevlar composite with excellent ballistic performance

Saisai Cao et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Soft armor materials constructed with Kevlar fabric and a novel shear thickening fluid

Jianbin Qin et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Paper & Wood

Denim Fabric with Flame retardant, hydrophilic and self-cleaning properties conferring by in-situ synthesis of silica nanoparticles

Sara Talebi et al.

CELLULOSE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Ionic Liquid-Based Stimuli-responsive Functional Materials

Jiecheng Cui et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Multiscale insights into the stretching behavior of Kevlar fiber

Bo Wang et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Shear Thickening Fluids Comparative Analysis Composed of Silica Nanoparticles in Polyethylene Glycol and Starch in Water

Remon A. Mankarious et al.

JOURNAL OF NANOTECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

CNT/STF/Kevlar-based wearable electronic textile with excellent anti-impact and sensing performance

Mei Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Modification of Epoxy Resin with a Phosphorus, Nitrogen, and Fluorine Containing Polymer to Improve the Flame Retardant and Hydrophobic Properties

Ting Chen et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Add to Collection

Review Materials Science, Composites

A review of recent research on materials used in polymer-matrix composites for body armor application

Zineb Benzait et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

Add to Collection

Article Thermodynamics

Preparation and flame retardancy of reactive flame retardant for cotton fabric

Pengshuang He et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection

Article Chemistry, Physical

Interparticle hydrogen bonding can elicit shear jamming in dense suspensions

Nicole M. James et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Study of a shear thickening fluid: the suspensions of monodisperse polystyrene microspheres in polyethylene glycol

Jianbin Qin et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Thermodynamics

An improved method for the durability of the flame retardant PA66 fabric

Wei Liu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Review Polymer Science

Shear thickening fluids in protective applications: A review

Selim Gurgen et al.

PROGRESS IN POLYMER SCIENCE (2017)

Add to Collection

Review Materials Science, Textiles

Review of Body Armor Research

Dan Yang et al.

AATCC JOURNAL OF RESEARCH (2017)

Add to Collection

Article Engineering, Manufacturing

Improving thermal and flame retardant properties of epoxy resin by functionalized graphene containing phosphorous, nitrogen and silicon elements

Yuezhan Feng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Add to Collection

Article Chemistry, Physical

Role of hydrogen bond interactions in water-polyol medium in the thickening behavior of cornstarch suspensions

Swarna et al.

COLLOID AND POLYMER SCIENCE (2017)

Add to Collection

Article Engineering, Manufacturing

Biaxial shear/tension failure behavior of Spectra single fibers

Jianzhuo Sun et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Engineering, Mechanical

Ballistic impact response of Kevlar® reinforced thermoplastic composite armors

Aswani Kumar Bandaru et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Mechanics

Tuning of the rheological properties of concentrated silica suspensions using carbon nanotubes

Mahdi Hasanzadeh et al.

RHEOLOGICA ACTA (2016)

Add to Collection

Article Mechanics

Experimental and modelling study of the effect of temperature on shear thickening fluids

Tongfei Tian et al.

KOREA-AUSTRALIA RHEOLOGY JOURNAL (2015)

Add to Collection

Review Physics, Multidisciplinary

Shear thickening in concentrated suspensions: phenomenology, mechanisms and relations to jamming

Eric Brown et al.

REPORTS ON PROGRESS IN PHYSICS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The ballistic impact characteristics of Kevlar® woven fabrics impregnated with a colloidal shear thickening fluid

YS Lee et al.

JOURNAL OF MATERIALS SCIENCE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.