☆ 4.7 Article

Synergistic effect of MOFs and PMHS on robust cotton fabric for promoted hydrophobic and UV-resistance

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Carbon Fiber Surface Functional Landscapes: Nanoscale Topography and Property Distribution

Katarina Adstedt et al.

Summary: The surface topography of carbon fibers and their composites plays a crucial role in determining their ultimate properties. However, there is limited research on the nanoscale surface characteristics of carbon fibers and their relationship with chemical modification. In this study, high-resolution atomic force microscopy was used to investigate the nanoscale surface topography of modified carbon fibers, revealing the influence of tension and chemical functionalization on the surface characteristics and their impact on interfacial interactions.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Applied

Preparation and anti-icing performance of cross-linked polysiloxane coatings containing silicone oil

Jian Yuan et al.

Summary: A cross-linked polysiloxane coating with silicone oil was prepared using a simple mixing method, and its anti-icing performance was investigated. The results showed that the ice adhesion force on the coating was related to the cross-link density, with higher cross-link density resulting in lower ice adhesion force and better anti-icing performance. The addition of silicone oil further reduced the ice adhesion force, enhancing the anti-icing performance. Icing/deicing cycle tests demonstrated that the coating maintained efficient anti-icing performance after 30 cycles.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Flower-Shaped Ni/Co MOF with the Highest Adsorption Capacity for Reactive Dyes

Junjie Si et al.

Summary: This study used a metal-organic framework material (NCM) as an efficient adsorbent to treat reactive dyes in printing and dyeing wastewater. The adsorption capacities of NCM for reactive red 218 reached 200 mg.g(-1), and the adsorption process followed the Langmuir isotherm model and the pseudo-second-order kinetic model. The thermodynamic fitting indicated that the adsorption of reactive red 218 on NCM was spontaneous and accompanied by an endothermic reaction.

LANGMUIR (2022)

Add to Collection

Article Chemistry, Physical

Recycling plastic waste into multifunctional superhydrophobic textiles

Qinglang Ma et al.

Summary: In this study, we have successfully recycled polystyrene waste into functional materials with superhydrophobic properties using a cost-effective dip-coating method. The resulting material shows excellent resistance to corrosion, high temperature, and mechanical abrasion, making it suitable for various applications including oil/water separation and dust-preventing fabrics.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Structure Evolution of Chemically Degraded ZIF-8

Peter C. Metz et al.

Summary: This study reveals the behavior of metal-organic zeolitic imidazolate framework-8 in humid SOx gas, finding that water concentration plays a critical role in framework disorder, and the structural transformation is homogeneously nucleated.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Add to Collection

Article Chemistry, Physical

Color fastness enhancement of dyed wood by Si-sol@PDMS based superhydrophobic coating

Zhangheng Wang et al.

Summary: Dyed-superhydrophobic wood (DS-wood) was successfully prepared by in-situ growth and transformation of Si-sol and polydimethylsiloxane (PDMS) to enhance the color fastness and superhydrophobicity. DS-wood exhibited excellent water washing resistance, abrasion resistance, stability, and self-cleaning properties.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Environmental Sciences

Preparation of zeolitic imidazolate framework-67/wool fabric and its adsorption capacity for reactive dyes

Xiran Qiao et al.

Summary: In this study, ZIF-67/wool fabric composite material was successfully prepared and showed good adsorption performance for reactive dyes. The amino and hydroxyl of the wool fabric effectively captured and fixed ZIF-67, making it easy to separate from the aqueous solution.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Generated UiO-66/Cotton Fabric Easily Recyclable for Reactive Dye Adsorption

Shuai Zhang et al.

Summary: This study demonstrates the efficient removal of reactive dyes from colored wastewater by loading extremely stable metal-organic framework material UiO-66 onto modified cotton fabric. The UiO-66/cotton fabric exhibited excellent adsorption performance, achieving equilibrium within a short time and showing a high removal rate for reactive dyes. The hydrophobicity of the reactive dyes was found to be correlated with their molecular weight, with higher molecular weight dyes more likely to adsorb on the adsorbent surface.

LANGMUIR (2022)

Add to Collection

Article Engineering, Chemical

Bio-based materials with special wettability for oil-water separation

Qinwei Fan et al.

Summary: This article provides an overview of bio-based oil-water separation materials, including basic considerations, typical works, and the impact of concepts and preparation methods on oil-water separation. The problems and challenges faced by bio-based materials are discussed and the future development is prospected.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Self-Restructuring of Polyhydromethylsiloxanes by the Hydride Transfer Process: A New Approach to the Cross-Linking of Polysiloxanes and to the Fabrication of Thin Polysiloxane Coatings

Urszula Mizerska et al.

Summary: The branching and cross-linking of siloxane polymers play vital roles in silicone technology. A new self-restructuring process has been developed, which transforms linear polyhydromethylsiloxane (PHMS) into highly branched siloxane polymer or cross-linked siloxane network through hydride ion transfer between silicon atoms catalyzed by tris(pentafluoromethyl)borane. Unlike existing reactions, this process operates at room temperature without the need for a low-molecular-weight cross-linker, water, silanol groups, or metal catalysts. The study of this process was conducted in toluene solution, tracking its progress through various techniques. A proposed mechanism based on quantum calculations supports this new self-restructuring process, and it has been demonstrated that a linear PHMS can serve as a precursor for pure methylsiloxane film.

MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Silver-Polymethylhydrosiloxane-Quaternary Ammonium Coating on Anodized Aluminum with Excellent Antibacterial Property

Henry Agbe et al.

Summary: In this study, a sol-gel process was used to incorporate silver and quaternary ammonium salt bactericides in a polymethylhydrosiloxane matrix. The resulting Ag-PMHS-QUAT nanocomposite was coated on anodized aluminum using ultrasound-assisted deposition. The nanocomposite exhibited superior antibacterial property, reducing bacterial count significantly.

ACS APPLIED BIO MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Multicomponent transport model-based scaling up of long-term adsorptive filtration of MOF incorporated mixed matrix hollow fiber membrane: Treatment of textile effluent

Sankha Karmakar et al.

Summary: This study prepared a porous chromium terephthalate metal-organic framework (MOF) impregnated polyacrylonitrile based hollow fiber membrane, and investigated its characteristics and adsorption capacity. Experimental results showed that the addition of MOF significantly affected the permeability and contact angle of the fibers, as well as exhibited high adsorption capacity towards reactive dyes in the fibers.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Layer by layer self-assembly MoS2/ZIF-8 composites on carboxyl cotton fabric for enhanced visible light photocatalysis and recyclability

Hang Chen et al.

Summary: A novel strategy for preparing high efficiency, durable, and recyclable photocatalytic materials based on ZIF-8 is proposed, where ZIF-8 is self-assembled layer-by-layer on carboxyl cotton fabric. The functionalized fabric shows good degradability to methylene blue under visible light irradiation, with about 99.8% degradation after 21 min and maintaining about 94.8% photocatalytic activity after six times of recycling. The study demonstrates great potential in the development of textile-based multifunctional photocatalytic materials.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Colorful superhydrophobic concrete coating

Kun Xu et al.

Summary: The colorful and robust superhydrophobic concrete (CSC) coating has a water contact angle of 158 +/- 0.5 degrees and a sliding angle of 5 +/- 0.8 degrees. It is composed of cement, sand, water-based stone protector, and dyes for concrete coloring. Its high robustness comes from the high adhesive force between the coating and the substrate, the inherent high hardness of concrete itself, and self-similarity of inside micro-structures. The CSC coating also exhibits excellent chemical durability and weather resistance.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Preparation of stable and durable superhydrophobic surface on Zr-based bulk metallic glass

Ming Zhang et al.

Summary: Superhydrophobic coral-like structures were prepared on Zr-based bulk metallic glass substrates through electrochemical etching and low surface energy modification. The surface exhibited high water contact angle, low sliding angle, outstanding corrosion resistance, high inhibition efficiency, and maintained superhydrophobicity after abrasion. The prepared superhydrophobic surface showed excellent stability and self-cleaning performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Review Polymer Science

Effects of Technical Textiles and Synthetic Nanofibers on Environmental Pollution

Ali Aldalbahi et al.

Summary: Textile manufacturing is a highly polluting industrial sector, contributing significantly to water and air pollution. This review examines the environmental impacts of high-performance textiles and their applications in various fields, aiming to bridge the gap between manufacturers and end-users.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Facile preparation of antibacterial MOF-fabric systems for functional protective wearables

Wei Liang Teo et al.

Summary: This study introduces a commercially viable solution for the general synthesis of MOF-fabric composites, allowing for easy preparation of materials with excellent antibacterial properties by securely adhering MOF powders onto fabric materials through coordination bonding between poly(acrylic acid) and MOF substrates. This methodology could enable large-scale fabrication of essential MOF-based personal protective wearables for use by healthcare professionals in response to the COVID-19 pandemic and other real-world problems.

SMARTMAT (2021)

Add to Collection

Article Chemistry, Physical

Fabrication of multifunctional textiles with durable antibacterial property and efficient oil-water separation via in situ growth of zeolitic imidazolate framework-8 (ZIF-8) on cotton fabric

Yingying Yang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

A cationic metal-organic framework for dye adsorption and separation based on column-chromatography

Liu Yang et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Anti-liquid-Interfering and Bacterially Antiadhesive Strategy for Highly Stretchable and Ultrasensitive Strain Sensors Based on Cassie-Baxter Wetting State

Jing Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Polymer Science

Highly Hydrophobic Cotton Fabrics Modified by Poly(methylhydrogen)siloxane and Fluorinated Olefin: Characterization and Applications

Huiping Lin et al.

POLYMERS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation and characterization of carboxymethylated cotton fabrics as hemostatic wound dressing

Yamei Wang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Gas Separation via Hybrid Metal-Organic Framework/Polymer Membranes

Yanshu Shi et al.

TRENDS IN CHEMISTRY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Textiles/Metal-Organic Frameworks Composites as Flexible Air Filters for Efficient Particulate Matter Removal

Kun Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Materials Science, Paper & Wood

Robust fluorine-free colorful superhydrophobic PDMS/NH2-MIL-125(Ti)@cotton fabrics for improved ultraviolet resistance and efficient oil-water separation

Yingying Yang et al.

CELLULOSE (2019)

Add to Collection

Article Chemistry, Physical

Facile fabrication of fluorine-free breathable poly(methylhydrosiloxane)/polyurethane fibrous membranes with enhanced water-resistant capability

Weixia Zhu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Integration of Metal-Organic Frameworks on Protective Layers for Destruction of Nerve Agents under Relevant Conditions

Zhijie Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of Hydrophobic ZnO/PMHS Coatings on Bamboo Surfaces: The Synergistic Effect of ZnO and PMHS on Anti-Mildew Properties

Jingbing Chen et al.

COATINGS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Heterolytic Si-H Bond Cleavage at a Molybdenum-Oxido-Based Lewis Pair

Niklas Zwettler et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Add to Collection

Article Chemistry, Applied

Self-cleaned photoluminescent viscose fabric incorporated lanthanide-organic framework (Ln-MOF)

Hossam E. Emam et al.

DYES AND PIGMENTS (2018)

Add to Collection

Article Chemistry, Analytical

Luminescent mixed-crystal Ln-MOF thin film for the recognition and detection of pharmaceuticals

Yanxin Gao et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection

Article Materials Science, Coatings & Films

Facile method for the hydrophobic modification of filter paper for applications in water-oil separation

Zhongqi Liu et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Paper & Wood

Preparation of highly hydrophobic and anti-fouling wood using poly(methylhydrogen)siloxane

Wensheng Lin et al.

CELLULOSE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Refractive-tunable and hydrophobic antireflective coatings by PMHS-modification assisted sol-gel method

Yingying Sun et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Liquid metal-organic frameworks

Romain Gaillac et al.

NATURE MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Anti-UV Radiation Textiles Designed by Embracing with Nano-MIL (Ti, In)-Metal Organic Framework

Hossam E. Emam et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Roll-to-Roll Production of Metal-Organic Framework Coatings for Particulate Matter Removal

Yifa Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of robust superhydrophobic fabrics based on coating with PVDF/PDMS

Chao-Hua Xue et al.

RSC ADVANCES (2016)

Add to Collection

Article Chemistry, Applied

Aqueous solution synthesis of ZIF-8 films on a porous nylon substrate by contra-diffusion method

Ming He et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.