4.7 Review

Progress in constructing high-performance anion exchange Membrane: Molecular design, microphase controllability and In-device property

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

State-of-the-art and developmental trends in platinum group metal-free cathode catalyst for anion exchange membrane fuel cell (AEMFC)

Mosaddek Hossen et al.

Summary: Non-platinum catalysts are essential for the economical application of AEMFC, and this review summarizes the advancements in the synthesis of different components and structures of catalysts. Thirteen catalysts have surpassed the peak power density threshold of 1000 mW.cm-2, including Metal-Nitrogen-Carbon (M-N-C), Bimetals-Nitrogen-Carbon (MM-N-C), Transition metal oxides (TMO), and non-metallic catalysts (NMC). The improvement in catalyst's porosity, surface area, conjugation of active sites, and synthesis procedures greatly affect the ORR activity and fuel cell performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Article Environmental Sciences

Low-grade sepiolite with low loading of Na/La salts for simultaneous removal of ammonia and phosphate from wastewater

Shaofeng Xiong et al.

Summary: Efficient treatment of wastewater is achieved by using a low-grade sepiolite, Na/La-Sep, which demonstrates excellent adsorption capability for ammonia nitrogen and phosphate species. The key factors affecting the nutrient removal efficiency are investigated. Na/La-Sep is cost-effective compared to other clay mineral adsorbents, and its removal mechanisms are elucidated through kinetic studies, molecular dynamics simulations, and electron density difference analysis.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Article Chemistry, Physical

High-performance and durable water electrolysis using a highly conductive and stable anion-exchange membrane

Sun Young Kang et al.

Summary: The commercialization of anion-exchange membrane water electrolysis (AEMWE) is crucial for producing low-cost and high-purity hydrogen. In this study, a high-performance and stable AEMWE was developed by using an anion-exchange membrane without an aryl-ether backbone structure. The adapted AEM exhibited improved performance and better durability compared to the conventional AEM.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Chemical

Impact of side-chains in poly(dibenzyl-co-terphenyl piperidinium) copolymers for anion exchange membrane fuel cells

Hae Min Kim et al.

Summary: This study reports the use of side-chain-type s-PDTP copolymers as ionomers and membranes for anion exchange membrane fuel cells (AEMFCs). These copolymers exhibit high alkaline stability, excellent micromorphology, and high OH- conductivity. The ionomers with moderate ion-exchange-capacity and rational water uptake show optimal AEMFC performance.

JOURNAL OF MEMBRANE SCIENCE (2022)

Review Chemistry, Multidisciplinary

Anion-Exchange Membrane Water Electrolyzers

Naiying Du et al.

Summary: This article summarizes the latest advances in the field of water electrolyzers regarding catalysts, membranes, and membrane electrode assemblies, focusing on the research focus of AEPs, improvement methods for AEMs, and current challenges including OER and HER. Despite rapid advancements in the field, stability remains a major issue that needs to be addressed.

CHEMICAL REVIEWS (2022)

Review Chemistry, Multidisciplinary

What is Next in Anion-Exchange Membrane Water Electrolyzers? Bottlenecks, Benefits, and Future

Carlo Santoro et al.

Summary: This article discusses the development status of anion-exchange membrane water electrolyzers (AEM-WE) and highlights the key aspects for research and potential routes for overcoming the remaining issues.

CHEMSUSCHEM (2022)

Article Engineering, Chemical

Elucidating the role of alkyl chain in poly(aryl piperidinium) copolymers for anion exchange membrane fuel cells

Chuan Hu et al.

Summary: Poly(aryl-co-aryl piperidinium) (c-PAP) has attracted attention in anion exchange membrane fuel cells. In this study, poly(aryl-co-terphenyl piperidinium)-x (PDnTP-x) AEMs with different alkyl spacers were investigated. Long alkyl chains improved dimensional stability and gas tightness, while short-chain-type membranes exhibited higher ion conductivity. All membranes showed excellent alkaline and oxidative stability. Short-chain-type PD0TP-x based AEMFC achieved a new-record power density and stable operation.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Highly conductive and alkaline stable partially fluorinated anion exchange membranes for alkaline fuel cells: Effect of ammonium head groups

Ahmed Mohamed Ahmed Mahmoud et al.

Summary: The study investigated the effect of ammonium structure on partially fluorinated anion exchange membranes for alkaline fuel cell applications. Among the membranes, QPAF-C3-Pip exhibited balanced properties and achieved the highest maximum power density. In durability testing, the voltage decreased with an average decay rate, with most of the voltage loss related to the catalyst layers according to post-durability NMR analysis.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Chemistry, Physical

Disentangling water, ion and polymer dynamics in an anion exchange membrane

Fabrizia Foglia et al.

Summary: Semipermeable polymeric anion exchange membranes play a vital role in energy conversion technologies. Understanding and controlling the interactions between relaxation and diffusional processes in these membranes is a main scientific challenge. Quasi-elastic neutron scattering has been used to analyze commercially available membranes, revealing the dynamics of water, polymer relaxation, and OH- diffusion.

NATURE MATERIALS (2022)

Article Chemistry, Physical

Anion Exchange Membranes for Fuel Cells: State-of-the-Art and Perspectives

Huanhuan Chen et al.

Summary: Fuel cell technology is a clean energy generation method that enables carbon neutrality. This Perspective highlights recent trends in the fabrication of high-performance anion exchange membranes (AEMs) and identifies future directions. The success in polymer design is expected to lead to the development of long-lasting fuel cells, reducing carbon emissions and facilitating sustainable development.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Heterostructure engineering of iridium species on nickel/molybdenum nitride for highly-efficient anion exchange membrane water electrolyzer

Huijie Wang et al.

Summary: This study successfully developed a novel catalyst for water electrolysis systems, which exhibits high activity and bifunctional characteristics, presenting excellent reaction kinetics in both hydrogen evolution and oxygen evolution reactions. By applying this catalyst to anion-exchange membrane water electrolyzers, superior performance was achieved.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

Efficient and Durable Anion Exchange Membrane Water Electrolysis for a Commercially Available Electrolyzer Stack using Alkaline Electrolyte

Myeong Je Jang et al.

Summary: A low-cost anion exchange membrane water electrolysis stack with good performance and durability is demonstrated in this study. By optimizing the configuration and materials of the single cell, high energy conversion efficiency and durability have been achieved, which shows potential for future applications.

ACS ENERGY LETTERS (2022)

Article Chemistry, Physical

Effect of Hydrophobic Side Chain Length on Poly(carbazolyl terphenyl piperidinium) Anion Exchange Membranes

Zhi Hong Cai et al.

Summary: In recent years, the continuous application of superacid-catalyzed condensation reactions has led to the development of anion exchange membranes (AEMs) with excellent performance. One widely discussed method is the copolymerization of two aromatic compounds with piperidone via a superacid-catalyzed reaction to synthesize anionic conducting copolymers. Among them, the poly(N-alkylcarbazole-co-terphenyl N,N '-dimethylpiperidinium) (PCTP-n) membranes exhibit high dimensional stability, alkaline resistance, mechanical robustness, and OH- conductivity.

ACS APPLIED ENERGY MATERIALS (2022)

Article Engineering, Chemical

Imidazolium structural isomer pyrazolium: A better alkali-stable anion conductor for anion exchange membranes

Tao Jiang et al.

Summary: Anion exchange membranes (AEMs) are crucial for energy conversion technologies. Developing novel cations with good alkaline stability and ion conducting properties is essential for improving the performance of AEMs.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Molecular dynamics insight into phase separation and transport in anion-exchange membranes: Effect of hydrophobicity of backbones

Kaiyu Zhang et al.

Summary: This study investigates the correlation between the hydrophobicity of the PAP backbone and the performance of AEMs. The molecular dynamics simulation analysis indicates that the hydrophobic PAP backbone forms more connective ion channels and repulses water molecules and hydroxides, promoting efficient hydroxide transportation.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Soft template promoted microphase separation in anion exchange membrane of electrodialysis

Anran Zhang et al.

Summary: This study demonstrates the effectiveness of a novel soft template strategy in fabricating high-performance anion exchange membranes for electrodialysis applications. The soft template strategy enhances microphase separation in the membranes to improve performance, particularly in terms of current efficiency and energy consumption.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Chemistry, Physical

Membrane Strategies for Water Electrolysis

Eun Joo Park et al.

Summary: Hydrogen holds great promise as a clean energy resource, and green hydrogen production through renewable energy-powered water electrolysis can help achieve the global carbon-free energy goal. Ion-exchange membranes play a key role in membrane-based water electrolysis, enabling high hydrogen production efficiency through a zero-gap configuration. Research efforts for membrane alternatives have increased to reduce the cost and improve the durability of electrolyzers without sacrificing performance and efficiency.

ACS ENERGY LETTERS (2022)

Article Chemistry, Multidisciplinary

Poly(Alkyl-Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline-Membrane Fuel-Cell Performance of 2.58 W cm-2

Nanjun Chen et al.

Summary: The study introduces aliphatic chain-containing PDTP copolymers to enhance the performance of AEMFCs. By reducing phenyl content in AEIs and improving mechanical properties in AEMs, PDTP materials exhibit excellent performance indicators such as mechanical properties, fuel barrier properties, ion conductivity, and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Synthesis and characterization of long-side-chain type quaternary ammonium-functionalized poly (ether ether ketone) anion exchange membranes

Hui Wang et al.

Summary: By adjusting the content of methylhydroquinone, the ion conductivity of AEM materials can be modified. PEEK-DABDA-80 membrane shows excellent mechanical properties and anti-swelling ability at 80 degrees C. Additionally, AEM materials exhibit good thermal stability and hold potential applications as alkaline AEMs.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Next-generation anion exchange membrane water electrolyzers operating for commercially relevant lifetimes

Behrooz Motealleh et al.

Summary: The use of Sustainion (R) anion exchange membranes in alkaline anion exchange membrane water electrolysis has shown good performance relative to industrial parameters, with stability and longer lifetime. Accelerated voltage shock tests were used to simulate daily cycling performance over 30 years, showing that performance can be improved by adding zirconia to the polymer matrix and mechanically reinforcing the membrane.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Organic

Degradation of Organic Cations under Alkaline Conditions

Wei You et al.

Summary: Understanding the degradation mechanisms of organic cations under basic conditions is crucial for the development of durable alkaline energy conversion devices. An evaluation of 26 model compounds is being conducted to identify cations with improved alkaline stabilities and advance the field.

JOURNAL OF ORGANIC CHEMISTRY (2021)

Article Chemistry, Physical

Effects of the operation mode on the degradation behavior of anion exchange membrane water electrolyzers

Atif Khan Niaz et al.

Summary: In this study, the effects of different operation modes on the stability of anion exchange membrane water electrolyzers (AEMWEs) were investigated. It was found that the short periodic operation mode led to performance degradation due to ohmic resistance, while the long periodic operation mode resulted in better stability with constant resistance values. The study suggests that even small operating factors like rest time frequency can have a significant impact on cell stability.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Water-Fed Hydroxide Exchange Membrane Electrolyzer Enabled by a Fluoride-Incorporated Nickel-Iron Oxyhydroxide Oxygen Evolution Electrode

Junwu Xiao et al.

Summary: A new dissolved oxygen and galvanic corrosion method was developed to synthesize vertically aligned fluoride-incorporated nickel-iron oxyhydroxide nanosheet arrays for an efficient self-supported oxygen evolution electrode. When integrated with a hydroxide exchange membrane electrolyzer, the system achieved a high performance of 1020 mA cm(-2) at 1.8 V and demonstrated catalyst stability over >160 hours of continuous operation at 200 mA cm(-2). This work offers a potential pathway for large-scale production of low-cost hydrogen using intermittent renewable energy sources.

ACS CATALYSIS (2021)

Article Engineering, Chemical

Chemically & physically stable crosslinked poly(aryl-co-aryl piperidinium)s for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The in-situ styrene-crosslinked c-PAP (x-PAP-PS) membranes exhibit high ion conductivity, mechanical strength, and durability, maintaining stability under harsh conditions. These membranes show improved water retention capacity at low relative humidity and achieve high power densities in AEMFCs.

JOURNAL OF MEMBRANE SCIENCE (2021)

Review Chemistry, Multidisciplinary

Emerging Porous Solid Electrolytes for Hydroxide Ion Transport

Dong Won Kang et al.

Summary: Developing excellent ion-conductive electrolytes using porous materials is crucial for addressing issues in AEMFCs. Most studies have focused on proton-conducting electrolytes, indicating a need for more research and discussion on OH--conducting electrolytes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Anion Exchange Ionomers: Impact of Chemistry on Thin-Film Properties

Xiaoyan Luo et al.

Summary: This study investigates the effects of chemistry and confinement on thin-film morphology and hydration by analyzing different backbones and side chains of AEIs. The results demonstrate how the chemical character of AEI side chains plays a key role in modulating hydration under confinement, and highlight the impact of backbone, side-chain chemistry, and anion/cation type on changes in thin-film morphology and swelling driven by confinement.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

High-performance poly(fluorenyl aryl piperidinium)-based anion exchange membrane fuel cells with realistic hydrogen supply

Nanjun Chen et al.

Summary: The research reports a PFAP ionomer that enables high power AEMFC with low hydrogen flow rate, showing high water permeability and stability. The AEMFCs demonstrated over 90% hydrogen utilization efficiency and significantly increased hydrogen fuel power.

JOURNAL OF POWER SOURCES (2021)

Article Engineering, Environmental

Mechanically robust microporous anion exchange membranes with efficient anion conduction for fuel cells

Tong Huang et al.

Summary: A mechanically robust and highly anion conductive PIM AEM (QPIM-1) with improved flexibility and high ion exchange capacity is reported in this study. The micropores in the PIM AEM evolve into water/ion conduction channels when the membrane is hydrated, resulting in superior ion conduction efficiency compared to dense polymeric AEMs. High hydroxide ion conductivity of 57 mS cm-1 at 20 ?C is achieved, making QPIM-1 AEMs one of the highest reported anion conductive PIM-based AEMs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Chemical

Piperidinium functionalized aryl ether-free polyaromatics as anion exchange membrane for water electrolysers: Performance and durability

Xu Hu et al.

Summary: In this study, a novel anion exchange membrane material PTP with high conductivity and mechanical properties at high temperatures was reported, showing good performance in AEM alkaline electrolyzers and high stability in external alkaline media. The PTP membrane demonstrated excellent performance in AEM alkaline electrolyzers, but chemical degradation may occur under high temperature and high current density conditions.

JOURNAL OF MEMBRANE SCIENCE (2021)

Review Nanoscience & Nanotechnology

Side-Chain-Type Anion Exchange Membranes Based on Poly(arylene ether sulfone)s Containing High-Density Quaternary Ammonium Groups

Kaiqi Wang et al.

Summary: A series of side-chain-type poly(arylene ether sulfone)s were designed and synthesized to obtain anion exchange membranes with high ionic conductivity and good dimensional stability. One specific membrane, PAES-QDTPM-0.30, showed excellent conductivity and stability due to the concentration of ion clusters and the side-chain-type structure. The membranes all maintained over 82% of their conductivity after alkali treatment.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Electrochemistry

Elucidating the Role of Hydroxide Electrolyte on Anion-Exchange-Membrane Water Electrolyzer Performance

Jiangjin Liu et al.

Summary: This study investigates the functionality of alkali metal solution in AEMWEs, finding that the solution plays a crucial role in the ohmic resistance of the membrane and catalyst layer, as well as the reaction kinetics. Results suggest that the high pH of electrolyte and the catalyst/electrolyte interface are important for the performance of AEMWEs.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Review Chemistry, Multidisciplinary

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Haijiao Lu et al.

Summary: Global energy and environmental crises have led to a growing interest in the development of renewable chemical fuels as alternatives to fossil fuels. Multicomponent nanomaterial-based systems with at least one component in the nanoscale have emerged as promising solutions to overcome the limitations of single-component systems. These higher-efficiency systems have the potential to reduce costs and improve sustainability in energy conversion technologies.

CHEMICAL REVIEWS (2021)

Article Chemistry, Multidisciplinary

Conductivity and Stability Properties of Anion Exchange Membranes: Cation Effect and Backbone Effect

Juanjuan Han et al.

Summary: The study highlights the impact of different types of cations on AEMs performance, emphasizing the need to select suitable backbones to match the cations for improved membrane performance.

CHEMSUSCHEM (2021)

Article Chemistry, Physical

Cross-linked anion exchange membranes with flexible, long-chain, bis-imidazolium cation cross-linker

Fei Xu et al.

Summary: In this study, PPO-based cross-linked anion exchange membranes with flexible, long-chain, bis-imidazolium cation cross-linkers were designed and synthesized. These membranes exhibit high IEC values, low swelling degree, good mechanical strength, high conductivity, and high power density, making them potentially applicable in alkaline anion exchange membrane fuel cells. Additionally, the BMImH-PPO samples showed good chemical stability under harsh conditions, with only minor decreases in IEC and conductivity, indicating their promising practical use.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Engineering, Chemical

Rational design of comb-shaped poly(arylene indole piperidinium) to enhance hydroxide ion transport for H2/O2 fuel cell

Xixing Zhou et al.

Summary: This study proposes a ternary copolymerization strategy to produce anion exchange membranes with high conductivity and chemical stability, utilizing comb-shaped copolymers with hydrophobic side chains attached to the backbone to stabilize the cation and achieve favorable morphology and performance.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Engineering, Chemical

Facilitating ionic conduction for anion exchange membrane via employing star-shaped block copolymer

Yu Pan et al.

Summary: The study developed a novel strategy to fabricate AEMs with a star topological structure and block copolymers, which can effectively improve the ionic conductivity and stability of AEM.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Engineering, Chemical

Constructing ionic channels in anion exchange membrane via a Zn2+soft template: Experiment and molecular dynamics simulation

Wanting Chen et al.

Summary: An effective soft-template strategy using Zn2+ metal ions to construct well-ordered ionic conductive channels in imidazolium functionalized polysulfone anion exchange membranes results in improved hydroxide conductivity and larger ionic clusters.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Polymer Science

Highly Durable Ether-Free Polyfluorene-Based Anion Exchange Membranes for Fuel Cell Applications

Fei Xu et al.

Summary: The study successfully enhanced the solubility and flexibility of PF-based AEMs by synthesizing a novel ether-free durable polyfluorene, showing high conductivity and excellent mechanical properties.

ACS MACRO LETTERS (2021)

Review Chemistry, Multidisciplinary

Recent Insights on Catalyst Layers for Anion Exchange Membrane Fuel Cells

Junfeng Zhang et al.

Summary: The performance of anion exchange membrane fuel cells has significantly improved in the last decade, now comparable with proton exchange membrane fuel cells. Issues in the catalyst layer play important roles in performance, and the anion exchange ionomer is crucial in maximizing the utilization of electrocatalyst and fuel/oxygen transfer process.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Flexible Bis-piperidinium Side Chains Construct Highly Conductive and Robust Anion-Exchange Membranes

Jianjun Zhang et al.

Summary: This study prepared a series of anion-exchange membranes with high ion conductivity and chemical stability, promoting the self-assembly of cationic groups through a special structure to enhance ion transport rate and stability.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm-2 and a durability of 1000 hours

Nanjun Chen et al.

Summary: The study introduces a new technology of PFAP-based AEMWEs with higher performance than PEMWEs, highlighting the importance of high water diffusivity and ion conductivity.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Performance and durability of anion exchange membrane water electrolyzers using down-selected polymer electrolytes

Andrew R. Motz et al.

Summary: In this study, the performance and durability of anion exchange membrane water electrolyzers (AEMWEs) were investigated using polymer electrolytes with high alkaline stability. The AEMWE with a poly(phenylene) membrane and a poly(fluorene) ionomeric binder exhibited the best performance among those tested in terms of current density and voltage degradation rate over several hundred operating hours. Further research needs for practical AEMWEs using polymer electrolytes are discussed based on these results.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

High conductivity and alkaline stability of anion exchange membranes containing multiple flexible side-chain piperidinium ions

Zhengwang Tao et al.

Summary: Poly(aryl ether sulfone) anion exchange membranes with eight flexible piperidinium ions were prepared using specific synthesis methods, demonstrating high water absorption, excellent ion conductivity, and alkaline stability. The study highlights the importance of selecting specific ionic groups and distributing cations to enhance the performance of AEMs.

MATERIALS CHEMISTRY FRONTIERS (2021)

Article Chemistry, Physical

Ultra-thin quaternized polybenzimidazole anion exchange membranes with throughout OH- conducive highway networks for high-performance fuel cells

Xiaozhou Wang et al.

Summary: This study establishes an ion conductive highway network in quaternized polybenzimidazole (PBI) AEMs to enhance ion conductivity and mechanical strength, leading to a high peak power density of about 1162.3 mW cm(-2) in H-2/O-2 fuel cells. The design of throughout conductive highway network makes PBI material one of the best candidates for AEMFCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Materials Science, Multidisciplinary

Polymer Electrolytes with High Ionic Concentration for Fuel Cells and Electrolyzers

Yu Seung Kim

Summary: As fuel cells and electrolyzers demand higher performance and durability, the design of polymer electrolytes is evolving with a focus on increasing ionic concentration. This review highlights recent advancements in the use of high ionic concentration polymer electrolytes in electrochemical devices, summarizing synthetic approaches, performance benefits, challenges, and prospects. The goal is to explain the working principles of these electrolytes in high-performing fuel cells and electrolyzers, while also generating interest in utilizing these materials in tackling tough scientific challenges in emerging fields.

ACS APPLIED POLYMER MATERIALS (2021)

Review Chemistry, Physical

Alkaline membrane fuel cells: anion exchange membranes and fuels

Masa Hren et al.

Summary: Alkaline anion exchange membrane fuel cells are gaining increasing attention as promising electrochemical devices for energy production. Significant progress has been made in designing and developing synthetic or naturally-derived anion exchange membrane, although challenges remain in terms of long-term stability.

SUSTAINABLE ENERGY & FUELS (2021)

Article Chemistry, Physical

Self-aggregating cationic-chains enable alkaline stable ion-conducting channels for anion-exchange membrane fuel cells

Jianjun Zhang et al.

Summary: The precise manipulation of the polyelectrolyte self-assembly process to form specific microstructures with ion-conducting channels is crucial for various fields. By introducing dipolar ethylene oxide spacers in the cationic side chain, a new strategy for designing self-aggregating side chains with optimized alkaline stability has been developed, leading to the creation of AEMs with enhanced conductivity and alkaline stability. This innovative concept shows promising results in terms of hydroxide conductivity, peak power density, and alkaline stability in fuel cell applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Energy & Fuels

A review of N-functionalized solid adsorbents for post-combustion CO2 capture

Xiayi (Eric) Hu et al.

APPLIED ENERGY (2020)

Article Engineering, Chemical

Anion exchange membranes with dense N-spirocyclic cations as side-chain

Fang Hua Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Review Materials Science, Multidisciplinary

Progress of Alkaline Anion Exchange Membranes for Fuel Cells: The Effects of Micro-Phase Separation

Fei Xu et al.

FRONTIERS IN MATERIALS (2020)

Article Chemistry, Multidisciplinary

De Novo Design of Covalent Organic Framework Membranes toward Ultrafast Anion Transport

Xueyi He et al.

ADVANCED MATERIALS (2020)

Article Engineering, Chemical

N3-butyl imidazolium-based anion exchange membranes blended with Poly alcohol) for alkaline water

Hyun Jin Park et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Article Green & Sustainable Science & Technology

Polybenzimidazole-crosslinked-poly(vinyl benzyl chloride) as anion exchange membrane for alkaline electrolyzers

R. E. Coppola et al.

RENEWABLE ENERGY (2020)

Article Chemistry, Physical

High-Efficiency Anion Exchange Membrane Water Electrolysis Employing Non-Noble Metal Catalysts

Pengzuo Chen et al.

ADVANCED ENERGY MATERIALS (2020)

Article Electrochemistry

Ionomer Optimization for Water Uptake and Swelling in Anion Exchange Membrane Electrolyzer: Oxygen Evolution Electrode

Garrett Huang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Chemistry, Multidisciplinary

Durability challenges of anion exchange membrane fuel cells

William E. Mustain et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Physical

Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells

Daniel P. Leonard et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Electrochemistry

High-performance anion-exchange membrane water electrolysis

Ji Eun Park et al.

ELECTROCHIMICA ACTA (2019)

Article Engineering, Chemical

Highly conductive anion exchange membranes based on one-step benzylation modification of poly(ether ether ketone)

Zhenghui Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Article Chemistry, Multidisciplinary

High Performance Anion Exchange Membrane Fuel Cells Enabled by Fluoropoly(olefin) Membranes

Liang Zhu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Physical

Predicting performance stability of anion exchange membrane fuel cells

Dario R. Dekel et al.

JOURNAL OF POWER SOURCES (2019)

Article Chemistry, Physical

Branched poly(ether ether ketone) based anion exchange membrane for H2/O2 fuel cell

Kaifeng Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Polymer Science

Alkaline Stability of Quaternized Diels-Alder Polyphenylenes

Eun Joo Park et al.

MACROMOLECULES (2019)

Article Chemistry, Physical

Ether-free polyfluorenes tethered with quinuclidinium cations as hydroxide exchange membranes

Andrit Allushi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Engineering, Chemical

Achieving high anion conductivity by densely grafting of ionic strings

Yubin He et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Article Chemistry, Physical

Anion exchange membrane fuel cells: Current status and remaining challenges

Shimshon Gottesfeld et al.

JOURNAL OF POWER SOURCES (2018)

Review Green & Sustainable Science & Technology

The role of hydrogen in low carbon energy futures-A review of existing perspectives

Emma S. Hanley et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Chemistry, Multidisciplinary

Beneficial use of rotatable-spacer side-chains in alkaline anion exchange membranes for fuel cells

Yuan Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Hydroxide Solvation and Transport in Anion Exchange Membranes

Chen Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Imidazolium Cations with Exceptional Alkaline Stability: A Systematic Study of Structure-Stability Relationships

Kristina M. Hugar et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Nanoscience & Nanotechnology

Highly Conductive Anion Exchange Membrane for High Power Density Fuel-Cell Performance

Xiaoming Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

Anion-exchange membranes in electrochemical energy systems

John R. Varcoe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Engineering, Chemical

Fluorene-containing poly(arylene ether sulfone)s as anion exchange membranes for alkaline fuel cells

Pei Yu Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Article Chemistry, Multidisciplinary

Stabilizing the Imidazolium Cation in Hydroxide-Exchange Membranes for Fuel Cells

Junhua Wang et al.

CHEMSUSCHEM (2013)

Article Chemistry, Multidisciplinary

Comb-shaped polymers to enhance hydroxide transport in anion exchange membranes

Nanwen Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Physical

Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application

Fengxiang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)