4.7 Article

Anion-exchange assisted sequential deposition for stable and efficient FAPbI3-based perovskite solar cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Acetic Acid-Assisted Synergistic Modulation of Crystallization Kinetics and Inhibition of Sn2+ Oxidation in Tin-Based Perovskite Solar Cells

Yang Su et al.

Summary: This study introduces acetic acid as an additive to achieve high-quality preparation of tin-based perovskite films, effectively reducing defect density and lattice distortion, thus improving the efficiency of solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Article Chemistry, Physical

Size-tunable MoS2 nanosheets for controlling the crystal morphology and residual stress in sequentially deposited perovskite solar cells with over 22.5% efficiency

Zhanfei Zhang et al.

Summary: The two-step crystallization method for perovskite film fabrication has been improved by incorporating MoS2 nanosheets as nano-scaffolds. The MoS2 treatment enhances the penetration of organic iodide, improves crystal orientation, and reduces residual stress and trap density in the film. The resulting PSCs exhibit high conversion efficiency and stability.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Crystal Growth Regulation of 2D/3D Perovskite Films for Solar Cells with Both High Efficiency and Stability

Tong Zhou et al.

Summary: Controlling crystal growth in perovskite films using 2D (NpMA)(2)PbI4 perovskite and 1-naphthalenemethylammonium iodide (NpMAI) can significantly improve the film quality and increase grain size, reducing defects and improving carrier lifetime. The best-performing device shows high power conversion efficiency and improved operational stability.

ADVANCED MATERIALS (2022)

Article Engineering, Environmental

Single-step-fabricated perovskite quantum dot photovoltaic absorbers enabled by surface ligand manipulation

Jigeon Kim et al.

Summary: This paper demonstrates a single-step fabrication approach for conductive thick CsPbI3-PQD absorbers based on surface ligand manipulation, which shows improved power conversion efficiency in PQD solar cells. By employing a different post-treatment method and utilizing solution-phase ligand exchange PQDs, the efficiency of solar cells was significantly increased.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Hydrophobic long alkyl chain organic cations induced 2D/3D heterojunction for efficient and stable perovskite solar cells

Xiang He et al.

Summary: In this study, a two-dimensional/three-dimensional heterojunction was formed by applying dodecylammonium bromide to the grain boundary of metal halide perovskite, improving the performance and stability of perovskite solar cells. The heterojunction increased the intensity of the built-in electric field, enhancing carrier separation and extraction, and the amino group passivated defects, contributing to the improvement of power conversion efficiency. Additionally, the long alkyl chain endowed the two-dimensional perovskite with good hydrophobic properties, improving the humidity and thermal stability of the device.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non-Halide Engineering

Zhen Wang et al.

Summary: The study introduces a novel precursor engineering method for fabricating high-efficiency perovskite solar cells using non-halide lead sources in ambient air, demonstrating both stability and high efficiency in humid conditions.

ADVANCED ENERGY MATERIALS (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

Beneficial effects of cesium acetate in the sequential deposition method for perovskite solar cells

Byeong Jo Kim et al.

Summary: The addition of cesium acetate (CsAc) effectively stabilizes FAMAPbI(3) perovskite, reduces trap density, extends carrier lifetime, and improves the performance and stability of perovskite solar cells in ambient conditions. The study provides insights into the crucial role of dopants and synthesis precursors in the efficiency and stability of perovskite solar cells.

NANOSCALE (2021)

Article Chemistry, Multidisciplinary

Controlling Crystal Growth via an Autonomously Longitudinal Scaffold for Planar Perovskite Solar Cells

Xiaopeng Duan et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

PEG Modified CsPbIBr2 Perovskite Film for Efficient and Stable Solar Cells

Yibo You et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Multidisciplinary Sciences

Methylamine-assisted growth of uniaxial-oriented perovskite thin films with millimeter-sized grains

Haochen Fan et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

A Cation-Exchange Approach for the Fabrication of Efficient Methylammonium Tin Iodide Perovskite Solar Cells

Fengzhu Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Multidisciplinary

Sequential Deposition of High-Quality Photovoltaic Perovskite Layers via Scalable Printing Methods

Fei Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Nanoscience & Nanotechnology

Scalable fabrication of perovskite solar cells

Zhen Li et al.

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Physical

Management of perovskite intermediates for highly efficient inverted planar heterojunction perovskite solar cells

Yingdong Xia et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Multidisciplinary

Two-Step Sequential Deposition of Organometal Halide Perovskite for Photovoltaic Application

Haining Chen

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Chemistry, Multidisciplinary

Exceptional Morphology-Preserving Evolution of Formamidinium Lead Triiodide Perovskite Thin Films via Organic-Cation Displacement

Yuanyuan Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Enhanced performance of perovskite solar cells by modulating the Lewis acid-base reaction

Xiaobing Cao et al.

NANOSCALE (2016)

Article Chemistry, Physical

Porous PbI2 films for the fabrication of efficient, stable perovskite solar cells via sequential deposition

Jie Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Article Chemistry, Multidisciplinary

Post-synthetic halide conversion and selective halogen capture in hybrid perovskites

D. Solis-Ibarra et al.

CHEMICAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells

Giles E. Eperon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Multidisciplinary Sciences

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Michael M. Lee et al.

SCIENCE (2012)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)