☆ 4.7 Article

Ultraviolet-assisted direct-write printing strategy towards polyorganosiloxane-based aerogels with freeform geometry and outstanding thermal insulation performance

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Elaborate Size-Tuning of Silica Aerogel Building Blocks Enables Laser-Driven Lighting

Xiaofei Ji et al.

Summary: Silica aerogels with accurate building-block control are achieved by adjusting surfactant concentration during synthesis. The resulting monolith shows promising application in monochromatic laser-driven lighting with low illuminance variation coefficient of 8.1%.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

General Suspended Printing Strategy toward Programmatically Spatial Kevlar Aerogels

Qingqing Cheng et al.

Summary: A universal microgel-directed suspended printing (MSP) strategy has been developed for fabricating various mesoporous aerogels with spatially stereoscopic structures, demonstrating excellent printability and programmability under high-speed printing mode. Custom-tailored aerogels with superior thermal properties have been successfully fabricated, showing excellent discharge capacity even under harsh environments. This strategy proposes an alternative for developing customized aerogels and inspires the creation of truly arbitrary architectures for wider applications.

ACS NANO (2022)

Add to Collection

Article Materials Science, Composites

Flexible and shape-configurable PI composite aerogel films with tunable dielectric properties

Omid Aghababaei Tafreshi et al.

Summary: This study presents the fabrication of novel polyimide composite aerogel films with tunable dielectric properties by incorporating graphene nanoplatelet fillers. The addition of graphene improved the nanostructure of aerogels, resulting in improved homogeneity and uniformity of the composite gel films. The inclusion of graphene nanoplatelets proved to be an effective strategy for improving the mechanical properties, machinability, and thermal stability of aerogels.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Review Materials Science, Ceramics

A review of silicon-based aerogel thermal insulation materials: Performance optimization through composition and microstructure

Chengdong Li et al.

Summary: Silicon-based aerogel (SA) has exceptional properties in thermal insulation, but intrinsic defects such as low strength and poor toughness restrict their practical applications. Composition optimization and microstructure reconstruction are convincing strategies to enhance their mechanical and thermal insulation properties and reduce cost.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review of recent progress on the silica aerogel monoliths: synthesis, reinforcement, and applications

Jiming Lin et al.

Summary: Silica aerogel monoliths (SAMs) with unique physical and chemical properties have shown promise in various applications, but their poor mechanical properties in large-scale production remain a critical challenge. Researchers have explored mechanical reinforcement strategies to improve SAMs' properties and highlighted their potential commercialization opportunities, despite facing challenges in different fields.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Review Chemistry, Applied

Silica aerogels; a review of synthesis, applications and fabrication of hybrid composites

Faheem Akhter et al.

Summary: Silica aerogels, prepared via sol-gel technique, possess high porosity, large surface area, low density, and thermal conductivity. They find applications in various fields such as biomedical and aerospace engineering. However, drawbacks like brittleness and low mechanical strength can be overcome by fabricating composites.

JOURNAL OF POROUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Influence of Silica-Aerogel on Mechanical Characteristics of Polyurethane-Based Composites: Thermal Conductivity and Strength

Jeong-Hyeon Kim et al.

Summary: In this study, PUFs were synthesized with various weight percentages of porous silica aerogel to enhance the characteristics of PUF used in LNG carrier insulation systems. The addition of 1 wt.% silica aerogel significantly improved the mechanical and thermal properties. However, increasing the silica aerogel content to 3 wt.% and 5 wt.% reduced the mechanical properties due to pores generated on the surface of the composites.

MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional-Printed Silica Aerogels for Thermal Insulation by Directly Writing Temperature-Induced Solidifiable Inks

Lukai Wang et al.

Summary: The thermal-solidifying 3D printing strategy can be used to fabricate silica aerogels with complex architectures, exhibiting comparable performances to traditional aerogels and holding promise for custom design and industrial production of insulation materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Additive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review

Halil Tetik et al.

Summary: Aerogels are highly porous structures produced by replacing the liquid solvent of a gel with air, without causing a collapse in the solid network. Additive manufacturing (AM) has been used to fabricate 3D aerogels with customized geometries specific to their applications, showing great promise in various fields such as tissue engineering, electrochemical energy storage, controlled drug delivery, sensing, and soft robotics. Postprinting processes are addressed to achieve desired properties like porosity and mechanical strength through drying and postdrying treatments.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Strong, highly hydrophobic, transparent, and super-insulative polyorganosiloxane-based aerogel

Sasan Rezaei et al.

Summary: This study presents a rapid and simply prepared TMSPMA-based aerogel with ultra-low density, high mechanical properties, extremely low thermal conductivity, and high hydrophobicity achieved by manipulating the nano-architecture of the aerogel structure. Two novel approaches, including post-gelation free radical self-curing method and changing the precursor nature, were explored to optimize the connectivity state.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Printed aerogels: chemistry, processing, and applications

Junzong Feng et al.

Summary: Aerogels, as a lightweight and porous nanomaterial, have attracted interest in both academia and industry. However, their modest mechanical durability poses challenges, which bottom-up additive manufacturing technology has the potential to address. This technology has led to the emergence of a new interdisciplinary research area combining aerogel and printing technology, pushing the boundaries of structure and performance while broadening their application scope.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Strong, Machinable, and Insulating Chitosan-Urea Aerogels: Toward Ambient Pressure Drying of Biopolymer Aerogel Monoliths

Natalia Guerrero-Alburquerque et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Ink Writing Based 4D Printing of Materials and Their Applications

Xue Wan et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Reaction-Spun Transparent Silica Aerogel Fibers

Yu Du et al.

ACS NANO (2020)

Add to Collection

Article Multidisciplinary Sciences

Additive manufacturing of silica aerogels

Shanyu Zhao et al.

NATURE (2020)

Add to Collection

Review Materials Science, Ceramics

Composites of silica aerogels with organics: a review of synthesis and mechanical properties

Kyu-Yeon Lee et al.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Versatile fabrication of anisotropic and superhydrophobic aerogels for highly selective oil absorption

Jingjing Wang et al.

CARBON (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Elastic methyltrimethoxysilane based silica aerogels reinforced with polyvinylmethyldimethoxysilane

Lukai Wang et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal conductivity of polyvinylpolymethylsiloxane aerogels with high specific surface area

Lukai Wang et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Transparent, Superflexible Doubly Cross-Linked Polyvinylpolymethylsiloxane Aerogel Superinsulators via Ambient Pressure Drying

Guoqing Zu et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices

Yanqiu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Patterned Carbon Nitride-Based Hybrid Aerogel Membranes via 3D Printing for Broadband Solar Wastewater Remediation

Peisheng He et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Versatile Double-Cross-Linking Approach to Transparent, Machinable, Supercompressible, Highly Bendable Aerogel Thermal Superinsulators

Guoqing Zu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured resorcinol-formaldehyde ink for 3D direct writing

Yingting Ge et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Review Materials Science, Ceramics

Preparation of tetraethoxysilane-based silica aerogels with polyimide cross-linking from 3, 3', 4, 4'-biphenyltetracarboxylic dianhydride and 4, 4'-oxydianiline

Zhifang Fei et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Ink Write 3D Printed Cellulose Nanofiber Aerogel Structures with Highly Deformable, Shape Recoverable, and Functionalizable Properties

Vincent C. F. Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Novel multifunctional polymethylsilsesquioxane-silk fibroin aerogel hybrids for environmental and thermal insulation applications

Hajar Maleki et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Applied

Simple spray deposition of a hot water-repellent and oil-water separating superhydrophobic organic-inorganic hybrid coatings via methylsiloxane modification of hydrophilic nano-alumina

Mingdong Yu et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Article Materials Science, Ceramics

Facile synthesis of large-sized monolithic methyltrimethoxysilane-based silica aerogel via ambient pressure drying

Shan Yun et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Applied

Effect of aging on silica aerogel properties

Subramaniam Iswar et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in Research on the Synthetic Fiber Based Silica Aerogel Nanocomposites

Agnieszka Slosarczyk

NANOMATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Low thermal-conductivity and high thermal stable silica aerogel based on MTMS/Water-glass co-precursor prepared by freeze drying

Yuelei Pan et al.

MATERIALS & DESIGN (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Silicone-Based Organic-Inorganic Hybrid Aerogels and Xerogels

Taiyo Shimizu et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

Add to Collection

Article Materials Science, Ceramics

Breakthroughs in cost-effective, scalable production of superinsulating, ambient-dried silica aerogel and silica-biopolymer hybrid aerogels: from laboratory to pilot scale

Matthias M. Koebel et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Printing in Three Dimensions with Graphene

Esther Garcia-Tunon et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Laser induced instantaneous gelation: aerogels for 3D printing

Shaukat Saeed et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Materials Science, Ceramics

An overview on silica aerogels synthesis and different mechanical reinforcing strategies

Hajar Maleki et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2014)

Add to Collection

Article Chemistry, Applied

Synthesis of lightweight polymer-reinforced silica aerogels with improved mechanical and thermal insulation properties for space applications

Hajar Maleki et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Ambient-pressure drying synthesis of large resorcinol-formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Shan Yun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Reinforcement of Silica Aerogels Using Silane-End-Capped Polyurethanes

Yannan Duan et al.

LANGMUIR (2013)

Add to Collection

Proceedings Paper Physics, Applied

Recent progress in silica aerogel Cherenkov radiator

Makoto Tabata et al.

PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON TECHNOLOGY AND INSTRUMENTATION IN PARTICLE PHYSICS (TIPP 2011) (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Controlled pore formation in organotrialkoxysilane-derived hybrids: from aerogels to hierarchically porous monoliths

Kazuyoshi Kanamori et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Stimuli-responsive gels as reaction vessels and reusable catalysts

David Diaz Diaz et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Article Chemistry, Physical

Mechanically reinforced silica aerogel nanocomposites via surface initiated atom transfer radical polymerizations

Dylan J. Boday et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Add to Collection

Review Nanoscience & Nanotechnology

Silica Aerogel: Synthesis and Applications

Jyoti L. Gurav et al.

JOURNAL OF NANOMATERIALS (2010)

Add to Collection

Article Materials Science, Ceramics

Hydrophobic and thermal insulation properties of silica aerogel/epoxy composite

Dengteng Ge et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Add to Collection

Review Engineering, Industrial

Silica aerogel; synthesis, properties and characterization

A. Soleimani Dorcheh et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Geochemistry & Geophysics

Thermal alteration of hydrated minerals during hypervelocity capture to silica aerogel at the flyby speed of Stardust

Takaaki Noguchi et al.

METEORITICS & PLANETARY SCIENCE (2007)

Add to Collection

Article Materials Science, Ceramics

Aerogel: Space exploration applications

Steven M. Jones

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Chemistry, Physical

Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica

U. Faysal Ilhan et al.

JOURNAL OF MATERIALS CHEMISTRY (2006)

Add to Collection

Article Chemistry, Physical

Cross-linking amine-modified silica aerogels with epoxies: Mechanically strong lightweight porous materials

MAB Meador et al.

CHEMISTRY OF MATERIALS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.