4.7 Article

Structural, magnetic and electrical properties of Y1-xScxFeO3 (x=0, 0.5 & 1) nanoparticles synthesized by the sol-gel method

Related references

Note: Only part of the references are listed.
Review Engineering, Mechanical

Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant

Xin Cui et al.

Summary: The substitution of biolubricant for mineral cutting fluids in aerospace material grinding is an important development direction, but the complex process of grinding difficult-to-machine materials presents challenges such as tool wear and workpiece damage. This review compares the grinding performance of different materials, analyzes the effects of the physicochemical properties of biolubricants on grindability, and provides recommendations for the use of biolubricants in different material grinding processes.

FRONTIERS OF MECHANICAL ENGINEERING (2023)

Article Chemistry, Applied

A 4arm-PEG macromolecule crosslinked chitosan hydrogels as antibacterial wound dressing

Jiawei Lu et al.

Summary: The novel chitosan hydrogel demonstrated strong toughness, high water absorption rate, antibacterial properties and biocompatibility, showing great potential in the field of wound dressings.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

Crystal Structure and Concentration-Driven Phase Transitions in Lu(1-x)ScxFeO3 (0 ≤ x ≤ 1) Prepared by the Sol-Gel Method

Andrius Pakalniskis et al.

Summary: The structural state and crystal structure of Lu(1-x)ScxFeO3 compounds were investigated, and it was found that chemical doping with Sc ions led to a structural phase transition and the stabilization of a non-perovskite phase.

MATERIALS (2022)

Article Engineering, Chemical

Spin reorientation behavior and enhanced multiferroic properties of co-doped YFeO3 towards a monophasic multiferroic ceramic Co0.05Y0.95Fe0.95Ti0.05O3

Souvick Das et al.

Summary: Monophasic nanocrystalline lead-free relaxor ferroelectric samples of YFeO3 and Co(0.05)Y(0.95)Fe(0.95)Ti(0.05)O(3) were prepared, and the influence of Co and Ti co-doping on their structural, dielectric, ferroelectric, and magnetic properties was investigated. The results showed enhanced multiferroic properties in the co-doped samples.

ADVANCED POWDER TECHNOLOGY (2022)

Article Environmental Sciences

Evaluation of cytotoxicity and genotoxicity effects of refractory pollutants of untreated and biomethanated distillery effluent using Allium cepa

Vineet Kumar et al.

Summary: This study assessed the physicochemical load in alcohol distillery effluent and the toxic effects of the pollutants on plant cells. High concentrations of pollutants were found in the effluent, causing significant damage to the plant cells.

ENVIRONMENTAL POLLUTION (2022)

Article Materials Science, Characterization & Testing

Synthesis and properties of Poly(vinyl alcohol) hydrogels with high strength and toughness

Ying Chen et al.

Summary: PVA hydrogels with high strength and toughness can be fabricated through dual physical and chemical cross-linking. The best mechanical properties are achieved by reacting at room temperature and subsequently undergoing freeze-thaw and annealing treatment. Additionally, the mechanical properties of PVA hydrogel increase and then decrease with the increase of molecular weight or mass fraction. By changing the reaction solvent, the mechanical properties of PVA hydrogel can be effectively adjusted.

POLYMER TESTING (2022)

Article Chemistry, Multidisciplinary

Efficacy of Gold Nanoparticles against Drug-Resistant Nosocomial Fungal Pathogens and Their Extracellular Enzymes: Resistance Profiling towards Established Antifungal Agents

Abobakr Almansob et al.

Summary: The drug resistance of filamentous fungi to antifungal agents is a major concern in medicine. This study investigated the effectiveness of AuNPs synthesized using Mentha piperita against multi-drug resistant Aspergillus species. The results show that these nanoparticles do not possess particularly effective antifungal properties, but they did inhibit some fungal isolates and caused significant alterations in the extracellular enzyme activity of the nosocomial fungi.

NANOMATERIALS (2022)

Article Nanoscience & Nanotechnology

Magnetoelectric Vertically Aligned Nanocomposite of YFeO3 and CoFe2O4

Abinash Kumar et al.

Summary: Researchers have successfully observed the self-assembled vertically aligned nanocomposites consisting of ferromagnetic pillars embedded in a ferroelectric matrix, and found that strain-mediated magnetoelectric coupling effect exists in this structure, which provides a new geometric configuration for studying magnetoelectric coupling based on strain-coupled magnetostrictive and piezoelectric effects.

ADVANCED ELECTRONIC MATERIALS (2022)

Article Engineering, Chemical

A Combinatorial Approach towards Antibacterial and Antioxidant Activity Using Tartaric Acid Capped Silver Nanoparticles

Irshad Begum et al.

Summary: A convenient synthetic strategy for the one-pot synthesis of silver nanoparticles capped by tartaric acid is reported. The nanoparticles were characterized using spectroscopic protocols and imaging techniques, revealing their size, surface charge, and morphology. The nanoparticles exhibited antibacterial activity, especially in synergy with selected antibiotics, and also showed good antioxidant activity. These capped nanoparticles have the potential for therapeutic applications in biomedical sciences.

PROCESSES (2022)

Article Chemistry, Physical

Two-step combustion synthesis of single-phase mesoporous ScFeO3 with bixbyite structure and magnetically soft behavior

M. I. Chebanenko et al.

Summary: This paper investigates the possibility of obtaining cubic bixbyite-type scandium ferrite in the form of phase-pure nanopowders. The samples were synthesized using a solution combustion method and then subjected to heat treatment. The results showed the formation of cubic scandium ferrite with different crystallite sizes depending on the fuel condition. The magnetic properties of the synthesized nanoparticles indicate ferromagnetic behavior, making them suitable for various applications in magnetic technology.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Biotechnology & Applied Microbiology

Nickel oxide nanoparticles synthesis using plant extract and evaluation of their antibacterial effects on Streptococcus mutans

Nastaran Chokhachi Zadeh Moghadam et al.

Summary: Dental decay is the most common human infectious disease, and nanomaterials hold promise for antimicrobial and antiviral applications.

BIOPROCESS AND BIOSYSTEMS ENGINEERING (2022)

Article Engineering, Manufacturing

Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication

Xin Cui et al.

Summary: This research establishes calculation formulas to evaluate the grindability of Ti6Al-4V titanium alloy, and finds that cryogenic nanolubricant minimum quantity lubrication (CNMQL) exhibits the best performance in the grinding process. CNMQL significantly reduces grinding force, peak temperature, and surface roughness, while improving the ability to resist surface defects.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Article Nanoscience & Nanotechnology

Effective treatment of resistant opportunistic fungi associated with immuno-compromised individuals using silver biosynthesized nanoparticles

Abobakr Almansob et al.

Summary: Drug resistance to antifungal medicines in filamentous fungus is a major problem in biomedical applications, and an effective strategy is needed to treat opportunistic fungal infections. In this study, silver nanoparticles (AgNPs) were prepared using an aqueous extract of Mentha piperita and their antifungal activity against Aspergillus species was investigated. The structural properties of AgNPs were characterized using various techniques, and it was found that AgNPs exhibited a single-phase fcc structure. The antifungal efficacy of AgNPs was determined using disc and broth microdilution methods, and it was found to be highly successful in inhibiting the growth of all tested fungi. The study also revealed that AgNPs had an impact on the enzymatic activity of A. fumigatus.

APPLIED NANOSCIENCE (2022)

Article Environmental Sciences

Synthesis of N-myristoyltaurine stabilized gold and silver nanoparticles: Assessment of their catalytic activity, antimicrobial effectiveness and toxicity in zebrafish

Sengan Megarajan et al.

Summary: This study evaluated the application of AgNPs and AuNPs synthesized using N14T in nanocatalysis, antibacterial activity, and toxicology. The results showed that both AgNPs and AuNPs exhibited catalytic activity in nitroaromatic reduction and dye degradation, with AuNPs displaying better catalytic efficiency. In addition, AgNPs showed strong antibacterial activity, while AuNPs displayed weak antibacterial activity. The toxicology study revealed that both AgNPs and AuNPs were non-toxic to zebrafish.

ENVIRONMENTAL RESEARCH (2022)

Article Environmental Sciences

Biomimetic facile synthesis of zinc oxide and copper oxide nanoparticles from Elaeagnus indica for enhanced photocatalytic activity

Dhatchanamoorthi Indhira et al.

Summary: This study successfully synthesized zinc oxide and copper oxide nanoparticles using Elaeagnus indica leaf extract for the first time, demonstrating excellent antimicrobial activity and photodegradation properties.

ENVIRONMENTAL RESEARCH (2022)

Review Engineering, Aerospace

Advances in fabrication of ceramic corundum abrasives based on sol-gel process

Baoteng Huang et al.

Summary: Corundum abrasives are widely used in precision machining, but they cannot meet the requirements of difficult-to-machine materials. Ceramic corundum abrasives fabricated by sol-gel method offer a cost-effective solution with self-sharpening and high toughness. Optimization methods for ceramic corundum abrasive properties include precursor synthesis, particle shaping, sintering, and the use of new sintering techniques to improve microstructural and mechanical performance.

CHINESE JOURNAL OF AERONAUTICS (2021)

Article Materials Science, Ceramics

Evaluating the structure-property correlation in Y1-xNdxFeO3 (0≤x≤0.15) perovskites

P. S. J. Bharadwaj et al.

Summary: The investigation on Y1-xNdxFeO3 polycrystalline powders synthesized via sol-gel technique revealed that increasing Nd3+ dopant concentration results in reduced grain size, structural distortion, decreased bandgap, increased magnetization, and reduced coercivity, leading to a transition from antiferromagnetic behavior to soft ferromagnetic behavior. The observed changes in optical and magnetic properties were correlated to the structural distortion.

CERAMICS INTERNATIONAL (2021)

Article Environmental Sciences

Ecofriendly and low-cost synthesis of ZnO nanoparticles from Acremonium potronii for the photocatalytic degradation of azo dyes

Fuad Ameen et al.

Summary: Nanoparticles are widely used in various fields due to their unique properties such as size and surface ratio. This study synthesized zinc oxide nanoparticles with sizes ranging between 13 and 15 nm using a new fungal species and demonstrated their catalytic activity in dye degradation.

ENVIRONMENTAL RESEARCH (2021)

Article Chemistry, Physical

Structural and magnetic properties of multiferroic hexagonal Lu0.5(Sc1-xInx)0.5 FeO3 ceramics

Kai Yang et al.

Summary: In this study, we investigated the structural and magnetic properties of hexagonal Lu-0.5(Sc1xInx)(0.5)FeO3 ceramics synthesized by solid state reaction. With increasing In-substitution, the lattice parameters and c/a ratio increased, leading to higher magnetic anomaly temperatures. The results suggest a more complex magnetic order with potential for room temperature multiferroics in hexagonal RFeO3 systems.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

Multiferroic, Phonon and Optical Properties of Pure and Ion-Doped YFeO3 Nanoparticles

Angel Apostolov et al.

Summary: The study theoretically investigated the magnetic, electric, phonon, and optical properties of pure and ion-doped orthorhombic YFeO3 nanoparticles. It was found that the spontaneous magnetization in YFeO3 decreases with decreasing particle size, while shape and ion doping can affect the magnetization strength. The influence of different factors on the phonon energy and band gap energy was also discussed, suggesting potential applications of doping effects.

NANOMATERIALS (2021)

Article Materials Science, Ceramics

Effect of Sr doped the YFeO3 rare earth ortho-ferrite on structure, magnetic properties, and microwave absorption performance

Man Wang et al.

Summary: In this study, Y1-xSrxFeO3 perovskite structure microwave absorbing ferrite materials were successfully synthesized by doping with Sr2+ ions based on sol-gel technology. With increasing Sr doping concentration, the particle size increased and the samples transitioned from a weak ferromagnetic state to a paramagnetic state. Additionally, the effective absorption bandwidth of the samples also increased with higher Sr content.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Ferromagnetic evolution in Nd3+, Ti4+ co-doped antiferromagnetic YFeO3

P. S. J. Bharadwaj et al.

Summary: Investigation of the structure-property correlation in the Y1-xNdxFe1-(4/3)yTiyO3 polycrystalline powders revealed a reduction in bandgap and an increase in remnant magnetization and coercivity with increasing x. Infusion of Nd3+ and Ti4+ changed the magnetic behavior, leading to deviation from G-type anti-ferromagnetism, achieved largely through super-exchange and double exchange coupling interactions. These materials with enhanced magnetic and optical properties show potential for varied applications.

MATERIALS RESEARCH BULLETIN (2021)

Article Physics, Condensed Matter

Study on structural, magnetic and electrical properties of ReFeO3 (Re= La, Pr, Nd, Sm & Gd) orthoferrites

Mehrnoush Nakhaei et al.

Summary: Nanoparticles of ReFeO3 orthoferrites were successfully synthesized and their structural, magnetic, and electrical properties were thoroughly investigated. The study revealed that SmFeO3 shows a ferromagnetic trend, while the other compounds exhibit weak ferromagnetic behavior. The magnetic behaviors of the nanoparticles were discussed based on the magnetization of Re and Fe sublattices and a core-shell model.

PHYSICA B-CONDENSED MATTER (2021)

Article Energy & Fuels

A promising inorganic YFeO3 pigments with high near-infrared reflectance and infrared emission

Yueying Li et al.

Summary: Colored non-toxic near-infrared (NIR) reflective and infrared radiative pigments, such as yttrium ferrite (YFeO3), with controllable crystalline structures were successfully synthesized in this study. The effects of crystalline and microstructural properties on the optical performance of YFeO3 pigments were investigated for the first time. Different crystalline forms of YFeO3 particles exhibited distinct optical absorption and reflection properties, highlighting their potential for energy-saving applications.

SOLAR ENERGY (2021)

Article Chemistry, Inorganic & Nuclear

YFeO3-GdFeO3 solid solutions: Sol-gel synthesis, structural and magnetic properties

Dovydas Karoblis et al.

Summary: A series of powdered Y1-xGdxFeO3 solid solutions were prepared using an aqueous sol-gel method, exhibiting single-phase compounds throughout the compositional range. Raman spectra showed a gradual change depending on chemical composition, and magnetic properties were strongly influenced by the ratio of Y3+ and Gd3+ ions, transitioning from hysteresis to linear magnetization with increasing Gd content.

SOLID STATE SCIENCES (2021)

Article Materials Science, Multidisciplinary

Multiferroicity in the YFeO3 crystal

Mingyu Shang et al.

FUNCTIONAL MATERIALS LETTERS (2020)

Article Engineering, Electrical & Electronic

Structural characterization, dielectric, and magnetic properties of Ti-doped YFeO3 multiferroic compound

M. Solorzano et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Chemistry, Multidisciplinary

Synergistic effect of trivalent (Gd3+, Sm3+) and high-valent (Ti4+) co-doping on antiferromagnetic YFeO3

P. S. J. Bharadwaj et al.

RSC ADVANCES (2020)

Article Materials Science, Multidisciplinary

Compaction Dynamics during Progenitor Cell Self-Assembly Reveal Granular Mechanics

Bart Smeets et al.

MATTER (2020)

Article Engineering, Electrical & Electronic

Effect of dopant-induced defects on structural, electrical, and enhanced ferromagnetism and magnetoelectric properties of Dy and Sr co-doped BiFeO3

Muniyandi Muneeswaran et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Review Chemistry, Physical

Advances in magnetoelectric multiferroics

N. A. Spaldin et al.

NATURE MATERIALS (2019)

Article Materials Science, Multidisciplinary

Substituted effect of Al3+ on structural, optical, magnetic and photocatalytic activity of Ni ferrites

A. Lassoued et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Review Multidisciplinary Sciences

Single-phase multiferroics: new materials, phenomena, and physics

Chengliang Lu et al.

NATIONAL SCIENCE REVIEW (2019)

Article Physics, Condensed Matter

Influence of particle size and lattice distortion on magnetic and dielectric properties of NdFeO3 orthoferrite

Mehrnoush Nakhaei et al.

PHYSICA B-CONDENSED MATTER (2019)

Article Materials Science, Ceramics

Crystal structure and multiferroic behavior of perovskite YFeO3

O. Rosales-Gonzalez et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Physical

Broad temperature dependent magnetic and dielectric spectroscopy study of Dy(Fe0.5Cr0.5)O3 multiferroic ceramics

Patri Tirupathi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Multidisciplinary

Ferro- and magneto-electric characteristics in YFeO3-Y3Fe5O12 nanocomposites

Santosh R. Wadgane et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Article Physics, Condensed Matter

Hyperfine interaction, Raman and magnetic study of YFeO3 nanocrystals

Bhagyashree S. Nagrare et al.

SOLID STATE COMMUNICATIONS (2018)

Article Engineering, Manufacturing

Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions

Min Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Article Physics, Condensed Matter

Electronic and magnetic properties of multiferroic ScFeO3 available from diffraction experiments

S. W. Lovesey et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2017)

Article Materials Science, Ceramics

Enhanced magnetic and dielectric properties of Ti-doped YFeO3 ceramics

Shivanand Madolappa et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Physics, Condensed Matter

Structural, vibrational and magnetic properties of the orthoferrites LaFeO3 and YFeO3: A comparative study

P. V. Coutinho et al.

SOLID STATE COMMUNICATIONS (2017)

Article Materials Science, Multidisciplinary

Studies on structural, electrical, thermal and magnetic properties of YFeO3 ceramic

Lokesh Suthar et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Article Chemistry, Physical

Optical and magnetic properties of La1-xGaxFeO3 nanoparticles synthesized by polymerization complex method

Sitchai Hunpratub et al.

APPLIED SURFACE SCIENCE (2016)

Review Nanoscience & Nanotechnology

The evolution of multiferroics

Manfred Fiebig et al.

NATURE REVIEWS MATERIALS (2016)

Article Materials Science, Multidisciplinary

Magnetoelectric coupling in the type-I multiferroic ScFeO3

G. Giovannetti et al.

PHYSICAL REVIEW B (2016)

Article Chemistry, Physical

Hydrothermal synthesis and magnetic properties of multiferroic rare-earth orthoferrites

Zhiqiang Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Article Materials Science, Ceramics

Dielectric behavior of hexagonal and orthorhombic YFeO3 prepared by modified sol-gel method

Run-Lan Zhang et al.

JOURNAL OF ELECTROCERAMICS (2014)

Article Chemistry, Multidisciplinary

Room-Temperature Polar Ferromagnet ScFeO3 Transformed from a High-Pressure Orthorhombic Perovskite Phase

Takahiro Kawamoto et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Physics, Applied

The multiferroic perovskite YFeO3

Mingyu Shang et al.

APPLIED PHYSICS LETTERS (2013)

Article Materials Science, Ceramics

Band-gap energy estimation from diffuse reflectance measurements on sol-gel and commercial TiO2: a comparative study

Rosendo Lopez et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2012)

Article Chemistry, Inorganic & Nuclear

Effect of Gd substitution on the structure and magnetic properties of YFeO3 ceramics

Xueping Yuan et al.

JOURNAL OF SOLID STATE CHEMISTRY (2012)

Article Materials Science, Ceramics

Preparation and magnetic properties of RFeO3 nanocrystalline powders

Anhua Wu et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2011)

Article Physics, Multidisciplinary

Spin-Canting-Induced Improper Ferroelectricity and Spontaneous Magnetization Reversal in SmFeO3

Jung-Hoon Lee et al.

PHYSICAL REVIEW LETTERS (2011)

Article Materials Science, Multidisciplinary

Intrinsic structural distortion and superexchange interaction in the orthorhombic rare-earth perovskites RCrO3

J. -S. Zhou et al.

PHYSICAL REVIEW B (2010)

Article Chemistry, Physical

Composite domain walls in a multiferroic perovskite ferrite

Yusuke Tokunaga et al.

NATURE MATERIALS (2009)

Article Materials Science, Multidisciplinary

Numerical simulation of magnetic interactions in polycrystalline YFeO3

E. Lima et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)

Article Materials Science, Multidisciplinary

Magnetic properties of the perovskite compounds YFe1-,CrxO3 (0.5≤x≤1)

A Dahmani et al.

MATERIALS CHEMISTRY AND PHYSICS (2003)

Article Materials Science, Multidisciplinary

Coupling between magnetism and dielectric properties in quantum paraelectric EuTiO3 -: art. no. 054415

T Katsufuji et al.

PHYSICAL REVIEW B (2001)

Review Chemistry, Physical

Why are there so few magnetic ferroelectrics?

NA Hill

JOURNAL OF PHYSICAL CHEMISTRY B (2000)