4.7 Article

Preparation of high-quality FeV50 alloy by an improved SHS-EAH multi-stage process

Journal

CERAMICS INTERNATIONAL
Volume 49, Issue 10, Pages 15114-15121

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.ceramint.2023.01.094

Keywords

FeV50; Thermodynamic; Aluminothermic; Phase diagram; Self-propagating high-temperature synthesis

Ask authors/readers for more resources

As the most widely used vanadium intermediate alloy, ferrovanadium is mainly prepared by the self-propagating high-temperature synthesis (SHS) process, with the advantages of short process and large heat release. However, there is a trade-off between the amount of reduction agent of Al and the product quality of ferrovanadium, which is caused by the thermodynamic equilibrium limitation of the reduction between Al and vanadium oxides. A new SHS-EAH process with multi-stage gradient aluminum addition coefficient pattern was implemented to improve yield and quality of ferrovanadium, reducing the vanadium content in slag and aluminum content in the alloy.
As the most widely used vanadium intermediate alloy, ferrovanadium is mainly prepared by the self-propagating high-temperature synthesis (SHS) process with the advantages of short process and large heat release. However, there is a trade-off between the amount of reduction agent of Al and the product quality of ferrovanadium, which is caused by the thermodynamic equilibrium limitation of the reduction between Al and vanadium oxides. The reasonable adjustment of the trade-off has become an urgent problem to be solved for the preparation of high -quality ferrovanadium. In the present work, the thermodynamic equilibrium for the reduction limitation using Al as reducing agent has been thoroughly analyzed with the reference to the equilibrium phase diagram. It was found that the theoretical reduction limitation of total vanadium (T.V) in slag was decreased from 4.08 wt.% to wt. 0.86 wt.% when the Al content in alloy reached 2.0 wt.% at 1800 C-?. The vanadium in slag was mainly presented in the form of MgV3O8 and coexisting with other phases of MgAl2O4, CaAl2O4, CaAl4O7, CaAl12O19. With the purpose of further decrease the high Al concentration in alloy and vanadium loss in slag, an improved SHS-EAH process was implemented by multi-stage gradient aluminum addition coefficient pattern, the average vanadium content in slag was reduced from 1.82 wt.% to 0.83 wt.%, while the aluminum content in FeV50 alloy was decreased from 1.5 wt.% to 0.4 wt.%. The SHS-EAH process was proved to be a better process with improved yield and quality for the preparation of ferrovanadium.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available